Alphacool ES HPE-60 Copper 80mm or Alphacool NexXxos ST30 360mm X-Flow? Which Alphacool Model to Buy
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This comparison covers the alphacool es hpe 60 copper 80mm vs nexxxos st30 360mm x flow. Both units use copper construction for heat transfer. They share the X-Flow fin design. The main difference is physical scale. One is a compact 80mm quad radiator. The other is a large 360mm triple fan unit. Your choice depends on your case size and cooling needs. You must match the radiator dimensions to your available mounting space.
Key differences
| Aspect | Alphacool ES HPE-60 Copper 80mm Quad Radiator | Alphacool NexXxos ST30 360mm X-Flow Radiator |
|---|---|---|
| Radiator Size | 80mm | 360mm |
| Dimensions (L x W x H) | 367 x 80 x 60 mm | 413 x 124 x 30 mm |
| Fan Configuration | 4x one-sided or 8x double-sided | Triple Fan |
| Weight | 3.45 pounds | 1.51 pounds |
| Ports | not listed | 4x G1/4" Thread |
Which one should you choose?
Choose Alphacool ES HPE-60 Copper 80mm Quad Radiator if
- You need a small footprint for tight spaces.
- You want to mount multiple fans on one side.
- You prefer a heavier, thicker core design.
Choose Alphacool NexXxos ST30 360mm X-Flow Radiator if
- You have space for a 360mm radiator.
- You want G1/4 inch connection points.
- You prefer a lighter weight unit.
Verdict: Choose the ES HPE-60 if you are limited to small 80mm mounting areas. Pick the NexXxos ST30 if you have room for a standard 360mm radiator and need threaded ports. The ST30 offers more surface area for larger cases.
Alphacool ES HPE vs ST30 Comparison
Radiator size
The Alphacool ES HPE-60 is a compact 80mm quad radiator with dimensions of 367 x 80 x 60 mm. It is designed for tight spaces or specific industrial setups. The Alphacool NexXxos ST30 is a 360mm triple fan radiator. Its dimensions are 413 x 124 x 30mm. This size is standard for modern PC cases with three 120mm fan mounts. You need to check your case compatibility. The ST30 offers significantly more surface area due to its length. The ES HPE is much smaller in physical footprint. Choose based on your available mounting space.
Fan configuration
The ES HPE-60 supports a unique fan configuration. It can hold four one-sided fans or eight double-sided fans. This allows for high airflow in a small volume. The ST30 is designed for three 120mm fans. This is the standard triple fan setup. You likely already have these fans or can easily buy them. The ES HPE requires specific 80mm fans. These are less common for standard PC builds. The ST30 offers easier fan sourcing. The ES HPE offers a different airflow approach.
Material construction
Both radiators use copper for the core components. The ES HPE-60 is a full copper X-Flow radiator. It features thicker cooling channels and reinforced weld seams. It is designed for operating pressures up to 5 bar. This makes it suitable for demanding industrial applications. The ST30 uses copper chambers, fins, and channels. It also has steel side panels and brass threads. Both are built for reliability. The ES HPE emphasizes pressure tolerance. The ST30 adds steel sides for structure. Both use copper for heat transfer efficiency.
Weight and portability
The ES HPE-60 weighs 3.45 pounds. This is heavier than the ST30. The ST30 weighs 1.51 pounds. The difference is significant for mounting. Heavier radiators require stronger mounting points. You must ensure your case can support the weight. The ES HPE is denser due to its quad design. The ST30 is lighter despite its larger size. This is due to its thinner profile and material choices. Lighter weight can simplify installation. Heavier weight may indicate more robust construction. Consider your case's structural limits.
Coolant connection
The ST30 features four G1/4" threaded ports. These are standard for most custom loops. You can easily connect tubes and fittings. The data for the ES HPE-60 does not list specific port details. You should check the manual or product images for port locations. Standard G1/4" fittings are common for Alphacool products. However, you cannot assume this without verification. The ST30 provides clear connection information. This makes planning your tubing layout easier. The ES HPE requires further research on connections.
Which Alphacool Radiator Suits You
Small form factor builders with tight space
The ES HPE-60 measures 367 x 80 x 60 mm. Its compact 80mm size fits small cases where larger radiators will not. You get quad fan support in a small footprint. The copper construction ensures reliable heat transfer in constrained environments. This model prioritizes physical dimensions over total surface area for tight builds.
Users needing high pressure industrial reliability
This radiator features thicker cooling channels and reinforced weld seams. It is designed for operating pressures up to 5 bar. This specification offers maximum reliability for demanding industrial applications. If your loop requires higher pressure tolerance, the ES HPE-60 construction provides a safety margin that standard consumer radiators may not guarantee.
Standard PC builders wanting triple fan cooling
The NexXxos ST30 is a 360mm triple fan radiator. It measures 413 x 124 x 30 mm. This size fits standard 120mm fan mounts in most mid and full tower cases. You get four G1/4 inch ports for easy tubing connection. The triple fan setup provides significantly more cooling surface area for standard desktop builds.
The products compared
Alphacool ES HPE-60 Copper 80mm Quad Radiator
Best for: Compact high-pressure cooling needs
- Material
- Copper, brass, steel
- Thread Size
- G1/4
- Size
- 80mm
- Dimensions
- 1 × 1 × 1 inches
- Weight
- 3.45 pounds
View on Amazon: Alphacool ES HPE-60 Copper 80mm Quad Radiator Affiliate link
The Alphacool ES HPE-60 is a full copper X-Flow radiator designed for compact builds. It measures 367 by 80 by 60 mm and weighs 3.45 pounds. The unit features thicker cooling channels and reinforced weld seams to handle operating pressures up to 5 bar. You can mount four fans on one side or eight fans double-sided. This high-pressure design suits demanding industrial applications or users needing maximum reliability in tight spaces.
Pros
- Full copper construction for efficient heat transfer
- Reinforced weld seams handle up to 5 bar pressure
- Supports 4x one-sided or 8x double-sided fan configurations
- Compact 80mm size fits small form factor cases
Cons
- Very narrow 80mm width limits total cooling surface area
- Single 80mm fan slot restricts airflow options compared to 120mm units
- Heavy 3.45 pounds for its small physical footprint
Good fit if
- You need a high-pressure rated radiator for industrial or heavy-duty use
- You are building a compact system with limited space for 80mm fans
- You require full copper construction for maximum thermal performance
Skip if
- You need high airflow from larger 120mm or 140mm fans
- You want a standard 360mm triple-fan radiator layout
- You prefer aluminum radiators for lighter weight
Verdict: Alphacool ES HPE-60 80mm Copper Radiator is a specialized high-pressure solution for compact builds. It fits users who need industrial-grade reliability in a small 80mm footprint.
Alphacool NexXxos ST30 360mm X-Flow Radiator
Best for: 360mm triple-fan copper radiator needs
- Radiator Size
- 360mm
- Material
- Copper, steel
- Thread Size
- G1/4
- Dimensions
- 16.3 × 4.88 × 1.18 inches
- Weight
- 1.51 pounds
View on Amazon: Alphacool NexXxos ST30 360mm X-Flow Radiator Affiliate link
The Alphacool NexXxos ST30 is a 360mm triple-fan radiator built for high airflow. It features full copper internals, including chambers and fins, with steel side panels. The unit weighs 686g and measures 413 x 124 x 30mm. It includes four G1/4" ports for flexible tubing connections. This model suits builders who need a large cooling surface in a standard 360mm form factor.
Pros
- Full copper construction for chambers, fins, and channels
- Four G1/4" threaded ports for easy connections
- Compact 124mm height fits most cases
- Triple fan mount provides broad coverage
Cons
- Steel side panels may limit aesthetic options
- Heavier build at 686g than aluminum alternatives
- Black finish limits color matching
Good fit if
- You need a 360mm radiator size
- You prefer full copper heat exchange
- You want multiple port options
Skip if
- You require a 240mm or smaller radiator
- You need a slim 25mm profile
- You want aluminum construction for weight savings
Verdict: Alphacool NexXxos ST30 360mm Copper offers reliable cooling for high airflow builds. It fits cases that support triple-fan mounts and copper radiators.
Specifications side by side
| Spec | Alphacool ES HPE-60 Copper 80mm Quad Radiator | Alphacool NexXxos ST30 360mm X-Flow Radiator |
|---|---|---|
| Radiator Size | not stated | 360mm |
| Material | Copper, brass, steel | Copper, steel |
| Thread Size | G1/4 | G1/4 |
| Size | 80mm | 360Mm |
| Dimensions | 1 × 1 × 1 inches | 16.3 × 4.88 × 1.18 inches |
| Weight | 3.45 pounds | 1.51 pounds |
| Color | Black | Black |
| Model | 10233 | 14230 |
Frequently asked questions
Is the Alphacool ES HPE-60 compatible with standard PC cases?
The ES HPE-60 is a specialized 80mm quad radiator designed for compact builds. Its small footprint suits tight spaces or specific industrial setups where larger units do not fit. You should verify your case supports 80mm fan mounts before purchasing. It is not intended for standard full-size chassis that require 120mm or 140mm radiators.
Does the NexXxos ST30 use the same fin design as the ES HPE?
Yes, both units share the X-Flow fin design. This common internal structure aims to optimize airflow and heat exchange efficiency. You get consistent thermal performance characteristics across both form factors. The difference lies in size and fan compatibility rather than core heat transfer technology.
What is the weight difference between the 80mm and 360mm Alphacool radiators?
The ES HPE-60 weighs 3.45 pounds. The NexXxos ST30 360mm weighs 1.51 pounds. The larger radiator is significantly lighter despite its size. You should account for these weights when mounting the unit. Heavier units may require more robust bracket support in your chassis.
Can I mount the ES HPE-60 with four fans?
Yes, the ES HPE-60 is a quad radiator. It supports four fans in an 80mm footprint. This allows for high-pressure cooling in a small space. You need a case or bracket that accommodates four 80mm fans. This setup is ideal for compact high-pressure cooling needs.
Is copper construction better than aluminum for these Alphacool models?
Both the ES HPE-60 and NexXxos ST30 use copper construction. Copper offers superior thermal conductivity for heat transfer. You benefit from reliable cooling performance in high airflow builds. Copper also tends to be more durable in custom loop environments compared to aluminum alternatives.
Which radiator fits a standard triple-fan 360mm mount?
The NexXxos ST30 is designed for 360mm triple-fan mounts. It fits cases that support standard triple-fan configurations. You get reliable cooling for high airflow builds. The ES HPE-60 does not fit this mount as it is an 80mm unit. Choose the ST30 for standard case compatibility.