Zopsc 200mm Cylinder Reservoir vs Zopsc 200mm Cooling Reservoir: Spec Comparison
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
You are looking at the zopsc 200mm cylinder reservoir vs 200mm cooling reservoir. Both units share a 200mm radiator size and G1/4 threads. They also use identical 45mm diameter tubes and weigh 6.7 ounces. The main difference is color. One is red. The other is green. This guide explains how those specs affect your build.
Key differences
| Aspect | Zopsc 200mm Cylinder Reservoir | Zopsc 200mm Cooling Reservoir |
|---|---|---|
| Color | Red | Green |
| Model Number | Zopscqvaue6ho45-11 | Zopscqvaue6ho45-12 |
| Mounting Hardware | Not listed | 2 half hoops and screws |
Which one should you choose?
Choose Zopsc 200mm Cylinder Reservoir if
- You want a red reservoir to match your case accents.
- You prefer a minimalist spec sheet with fewer listed parts.
- You need the Zopscqvaue6ho45-11 model specifically.
Choose Zopsc 200mm Cooling Reservoir if
- You want a green reservoir to match your case accents.
- You need included mounting hardware for easier installation.
- You prefer the Zopscqvaue6ho45-12 model specifically.
Verdict: Choose the red model if you prioritize color matching and do not need listed mounting hardware. Choose the green model if you want included half hoops and screws for straightforward installation. Both offer identical cooling performance and sealing technology.
Reservoir Build and Material Specs
Tube Material
Both the Zopsc 200mm Cylinder Reservoir and the Zopsc 200mm Cooling Reservoir use a transparent acrylic tube for the main body. This material choice allows you to clearly see the coolant level and flow inside the loop. The data confirms that both units rely on this same acrylic construction for visibility. You get the same visual benefit from either option, as neither uses glass or polycarbonate in the tube section. This means clarity is identical across both models. You do not need to choose one over the other based on tube transparency, as both provide a clear view of your system's fluid.
End Cap Material
Each reservoir features end caps made from high-temperature engineering plastic. The Zopsc 200mm Cylinder Reservoir uses these caps on both ends to ensure durability against heat. Similarly, the Zopsc 200mm Cooling Reservoir employs high-temperature engineering plastics for its upper and lower covers. This shared material choice ensures that both units can withstand the thermal environment of a PC case without deforming. You do not need to worry about plastic degradation affecting the seal or structure. Both products offer the same level of thermal resistance in their structural components, making them equally suitable for high-performance builds.
Sealing Method
Sealing integrity is critical for any water cooling loop. The Zopsc 200mm Cylinder Reservoir utilizes reinforced glue on both ends to create a leak-proof seal. The Zopsc 200mm Cooling Reservoir also uses strong glue on both covers to prevent leaks. Both products claim superior sealing performance compared to standard reservoirs. Since both rely on adhesive bonding at the junctions of the acrylic tube and plastic caps, the method of sealing is functionally identical. You get the same assurance of leak prevention from either unit. There is no technical advantage in sealing technology between the two, as both employ the same glue-based approach.
Mounting Hardware
Installation convenience varies slightly in the description. The Zopsc 200mm Cooling Reservoir explicitly mentions including essential mounting hardware, specifically two half hoops and screws. This makes installation straightforward for builders. The Zopsc 200mm Cylinder Reservoir description highlights vertical mounting capability for space efficiency but does not explicitly list the included hardware in the provided features. While both likely support similar mounting, the explicit mention of included screws and hoops for one model gives it a slight edge in clarity for new builders. You can be certain about what is in the box for the Cooling Reservoir.
Color Options
The most visible difference between these two reservoirs is the color. The Zopsc 200mm Cylinder Reservoir is available in red. The Zopsc 200mm Cooling Reservoir comes in green. This allows you to match the reservoir to your custom loop theme or case aesthetics. If you prefer a red accent, the Cylinder Reservoir is the choice. If you want a green accent, the Cooling Reservoir fits your build. Since performance specs are identical, the decision rests entirely on your visual preference for the loop. One offers red, and the other offers green, with no impact on cooling efficiency.
Weight
Both reservoirs weigh exactly 6.7 ounces. This identical weight means they place the same load on your mounting brackets and radiator frame. You do not need to reinforce your case differently for one over the other. The structural integrity and material usage result in the same mass for both units. This consistency ensures that balance and stability in your water cooling loop are not affected by your choice of color or specific model name. Both products are equally light, making them easy to handle during installation and loop filling.
Which Zopsc Reservoir Fits Your Build
Builders who prefer red accents in their loop
Choose the Zopsc 200mm Cylinder Reservoir if red fits your aesthetic. It shares the same 45mm diameter tube and 6.7-ounce weight as the green option. The transparent acrylic body lets you monitor coolant levels clearly. Reinforced glue on both ends provides superior leak-proof performance for your custom loop.
Users who prefer green accents in their loop
Select the Zopsc 200mm Cooling Reservoir for a green look. It includes essential mounting hardware like two half hoops and screws for straightforward installation. The high-temperature engineering plastic covers ensure long-term durability. The G1/4 threaded ports offer tight connections for a safe and reliable water cooling setup.
Those prioritizing easy installation with included hardware
The Zopsc 200mm Cooling Reservoir is the practical choice if you want included mounting hardware. It comes with two half hoops and screws for easy setup. The 45mm diameter tube maximizes water volume for faster heat dissipation. The transparent acrylic tube allows you to verify coolant levels and flow efficiently.
The products compared
Zopsc 200mm Cylinder Reservoir
Best for: Vertical mounting and G1/4 loops
- Material
- Acrylic, engineering plastic
- Reservoir Capacity
- 200mm high, 45mm diameter
- Thread Size
- G1/4"
- Weight
- 6.7 ounces
View on Amazon: Zopsc 200mm Cylinder Reservoir Affiliate link
This Zopsc reservoir uses a 200mm cylinder with a 45mm diameter tube to hold more coolant for faster heat dissipation. It features G1/4 threaded ports for secure connections and a transparent acrylic tube for clear visibility. The red color adds style to your build. It weighs 6.7 ounces. This unit suits vertical mounting for air purging.
Pros
- 200mm cylinder design maximizes water volume
- 45mm diameter tube aids heat dissipation
- G1/4 threaded ports for leak-proof fittings
- Transparent acrylic tube shows coolant level
- Red color option for aesthetic appeal
Cons
- Only one color option available
- Weight is 6.7 ounces
- No app control mentioned
Good fit if
- You want a vertical mount for air purging
- You need G1/4 threaded connections
- You prefer a red aesthetic
Skip if
- You require multiple color choices
- You need a larger diameter tube
- You want app control features
Verdict: Zopsc 200mm Red Cylinder Reservoir fits builders who need G1/4 ports and vertical mounting for air purging. It offers clear visibility and fast cooling in a red finish.
Zopsc 200mm Cooling Reservoir
Best for: 200mm builds needing 45mm tube capacity
- Material
- Acrylic, engineering plastics
- Thread Size
- G1/4"
- Radiator Size
- 200mm
- Coolant Color
- Green
- Weight
- 6.7 ounces
View on Amazon: Zopsc 200mm Cooling Reservoir Affiliate link
The Zopsc 200mm cylinder reservoir uses a 45mm diameter tube to hold more coolant, which helps improve heat dissipation in high-end builds. It features a transparent acrylic body for clear visibility and durable high-temperature engineering plastic covers. The unit includes G1/4 threads for secure connections and comes with mounting hardware. It is a practical option for builders who need reliable sealing and easy installation.
Pros
- 45mm diameter tube increases liquid capacity for better thermal performance
- Transparent acrylic body allows clear coolant level visibility
- G1/4 thread compatibility ensures secure connections with most systems
- Strong glue sealing on covers helps prevent leaks
Cons
- Only includes G1/4 threads, lacking other common sizes
- Uses glue sealing rather than mechanical O-rings
- Green color limits aesthetic matching options
Good fit if
- You need a 200mm reservoir with a 45mm tube diameter
- You prefer transparent acrylic for coolant visibility
- You want a unit with G1/4 thread compatibility
Skip if
- You require multiple thread sizes beyond G1/4
- You prefer mechanical O-ring sealing over glue
- You need a reservoir with a different color finish
Verdict: Zopsc 200mm Cylinder Reservoir fits builders who prioritize a 45mm tube diameter for capacity and clear acrylic visibility. It suits those who value G1/4 thread compatibility and reliable glue sealing for their custom loop.
Specifications side by side
| Spec | Zopsc 200mm Cylinder Reservoir | Zopsc 200mm Cooling Reservoir |
|---|---|---|
| Material | Acrylic, engineering plastic | Acrylic, engineering plastics |
| Reservoir Capacity | 200mm high, 45mm diameter | not stated |
| Thread Size | G1/4" | G1/4" |
| Radiator Size | 200mm | 200mm |
| Coolant Color | not stated | Green |
| Weight | 6.7 ounces | 6.7 ounces |
| Color | Red | Green |
| Model | Zopscqvaue6ho45-11 | Zopscqvaue6ho45-12 |
Frequently asked questions
Can I mount the Zopsc 200mm reservoir vertically?
Yes, the Zopsc 200mm Cylinder Reservoir is designed for vertical mounting. This orientation helps with air purging in your custom loop. It ensures that trapped air bubbles rise to the top of the clear acrylic body, allowing you to see them clearly before they enter your pump.
What thread size do these Zopsc reservoirs use?
Both the Zopsc 200mm Cylinder Reservoir and the Zopsc 200mm Cooling Reservoir use G1/4 threads. This is a standard thread size for most PC liquid cooling fittings. You can connect standard G1/4 tubes and fittings directly to these ports without needing adapters or complex hardware.
Is there a weight difference between the two models?
No, there is no weight difference between the two units. Both the red and green versions weigh exactly 6.7 ounces. This consistent weight means your case mounting stress remains the same regardless of which color option you choose for your build aesthetic.
Do these reservoirs fit 200mm radiators?
Yes, both models are specified for a 200mm radiator size. This ensures they are proportionate to smaller or compact custom loop builds that utilize 200mm cooling blocks or radiators. The design integrates well with systems where space is limited but you still want clear coolant visibility.
What is the main visual difference between the two reservoirs?
The primary difference is the color of the acrylic body. One model features a red finish, while the other is green. Both share the same transparent tube design for coolant visibility. You should choose based on which color complements your existing loop dye or hardware accents.
How much coolant capacity do these units hold?
These reservoirs are built around a 45mm tube diameter. This specific diameter provides a substantial volume for coolant storage compared to thinner tubes. The clear acrylic body allows you to monitor this capacity easily, ensuring your pump remains primed and your loop stays stable during operation.