Alphacool ES HPE-60 Copper 80mm vs Alphacool NexXxoS XT45 Triple 80mm: Spec Comparison
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The alphacool es hpe 60 copper 80mm vs nexxxos xt45 triple 80mm comparison helps you choose between two full copper 80mm radiators. Both units use copper cores for heat dissipation and share the same 80mm fan mounting footprint. They differ significantly in physical dimensions and intended density. The ES HPE-60 is a quad-core unit with a thicker profile, while the XT45 is a triple-core design with a slimmer height. You need to match these specs to your case space and cooling loop pressure requirements.
Key differences
| Aspect | Alphacool ES HPE-60 Copper 80mm Quad Radiator | Alphacool NexXxoS XT45 Triple 80mm Copper Radiator |
|---|---|---|
| Core Configuration | Quad | Triple |
| Dimensions (L x W x H) | 367 x 80 x 60 mm | 287 x 80 x 45 mm (approx 11.3 x 3.19 x 1.77 in) |
| Operating Pressure | Up to 5 bar | Not listed |
| Weight | 3.45 pounds | 1.56 pounds |
| Model Number | 10233 | 14218 |
Which one should you choose?
Choose Alphacool ES HPE-60 Copper 80mm Quad Radiator if
- You require a quad-core radiator for higher heat dissipation in a compact 80mm form factor.
- You need a radiator rated for high operating pressure up to 5 bar for demanding industrial applications.
- You have case space that accommodates a 60mm thickness and do not mind the additional weight.
Choose Alphacool NexXxoS XT45 Triple 80mm Copper Radiator if
- You prefer a lighter radiator that weighs only 1.56 pounds.
- You need a slimmer profile with a height of approximately 45mm to fit tight cases.
- You want a triple-core configuration that balances cooling performance with space efficiency.
Verdict: Choose the ES HPE-60 if you need maximum cooling density and high-pressure reliability in a 80mm footprint. Pick the XT45 Triple if you are constrained by height or weight limits. Both are full copper solutions, but their physical profiles serve different case and loop requirements.
Copper Radiator Specs Compared
Core material
Both the Alphacool ES HPE-60 and the NexXxoS XT45 Triple use full copper cores. This material choice is consistent across both models, ensuring high thermal conductivity for heat dissipation. Copper is a standard, reliable material for water cooling radiators, offering excellent performance in transferring heat from the coolant to the fins. Since both products rely on copper construction, there is no performance difference based on the base material itself. You get the same thermal properties from either unit, making this a neutral factor in your decision process.
Physical dimensions
The physical footprint differs significantly between the two units. The ES HPE-60 measures 367 x 80 x 60 mm. In contrast, the NexXxoS XT45 Triple has a length of 11.3 inches, a width of 3.19 inches, and a height of 1.77 inches. The XT45 Triple is notably longer, providing more surface area for heat exchange. The ES HPE-60 is more compact in length but shares the same 80mm width. Your case compatibility will depend on whether you need the extra length of the XT45 or the shorter profile of the ES HPE-60.
Fan configuration
The ES HPE-60 explicitly supports a configuration of 4x one-sided fans or 8x double-sided fans. This flexibility allows for varied airflow setups depending on your case layout. The data for the NexXxoS XT45 Triple does not specify a fan count or configuration. However, given its triple 80mm designation, it likely accommodates three fans on one side. The ES HPE-60 offers clearer guidance on mounting options, which is helpful if you plan to use double-sided fan arrangements for increased airflow density.
Operating pressure
The ES HPE-60 is designed for an operating pressure of up to 5 bar. This rating ensures maximum reliability in demanding industrial applications and high-pressure loops. The specifications for the NexXxoS XT45 Triple do not list an operating pressure limit. A higher pressure rating can provide peace of mind for systems with high-flow pumps or complex tubing runs. If you are building a high-pressure loop, the ES HPE-60 provides verified durability data that the XT45 Triple lacks in the provided specs.
Weight
Weight can matter for case mounting and structural support. The ES HPE-60 weighs 3.45 pounds. The NexXxoS XT45 Triple weighs 1.56 pounds. The ES HPE-60 is significantly heavier, likely due to its dense copper construction and reinforced weld seams. The lighter XT45 Triple may be easier to mount in cases with limited shelf strength. If you are concerned about the weight load on your case fans or brackets, the XT45 Triple offers a lighter profile.
Which Alphacool Radiator Suits You
Users needing maximum pressure reliability
The ES HPE-60 features reinforced weld seams designed for operating pressures up to 5 bar. This specification ensures maximum reliability for demanding industrial applications. If you prioritize durability under high pressure, this full copper quad radiator offers the structural integrity needed for rigorous cooling loops without risk of failure.
Those wanting flexible height options
The NexXxoS XT45 Triple is available in two heights: 1.77 inches and 2.36 inches. This variation allows you to select the thickness that best fits your case or airflow requirements. The triple configuration provides a balanced heat dissipation surface area while maintaining compatibility with standard 80mm fan mounts for versatile installation.
People prioritizing lower weight
Weighing only 1.56 pounds, the NexXxoS XT45 Triple is significantly lighter than the ES HPE-60, which weighs 3.45 pounds. This reduced weight minimizes stress on your case or mounting brackets. If you are building a lightweight loop or have strict weight constraints, this triple radiator offers a substantial advantage in portability and ease of handling.
The products compared
Alphacool ES HPE-60 Copper 80mm Quad Radiator
Best for: High pressure 80mm copper cooling loops
- Material
- Copper, brass, steel
- Thread Size
- G1/4
- Size
- 80mm
- Dimensions
- 1 × 1 × 1 inches
- Weight
- 3.45 pounds
View on Amazon: Alphacool ES HPE-60 Copper 80mm Quad Radiator Affiliate link
This is an 80mm full copper radiator with a quad core design. It measures 367 x 80 x 60 mm and weighs 3.45 pounds. The unit supports up to 5 bar of operating pressure due to thicker cooling channels and reinforced weld seams. You can mount four fans on one side or eight fans across both sides. It suits you if you need high pressure tolerance and dense fin packing in a compact 80mm form factor.
Pros
- Full copper construction for efficient heat transfer
- Supports up to 5 bar operating pressure
- Reinforced weld seams for reliability
- Fits four one-sided or eight double-sided fans
Cons
- Compact 80mm size limits total surface area
- Heavy at 3.45 pounds for its size
- No mention of included mounting hardware or fans
Good fit if
- You need a radiator rated for high system pressure
- You have space for a 367mm long 80mm unit
- You want dense copper cooling in a small footprint
Skip if
- You require a 120mm or larger radiator size
- You prefer aluminum cores over copper
- You need a lightweight radiator under 2 pounds
Verdict: Alphacool ES HPE-60 Copper 80mm Quad Radiator fits you if you need high pressure tolerance in a small 80mm space. It is a robust copper core for demanding industrial or high-pressure loops.
Alphacool NexXxoS XT45 Triple 80mm Copper Radiator
Best for: Small form factor builds needing high cooling density
- Radiator Size
- 80mm
- Material
- Copper
- Thread Size
- G1/4
- Dimensions
- 11.3 × 3.19 × 1.77 inches
- Weight
- 1.56 pounds
View on Amazon: Alphacool NexXxoS XT45 Triple 80mm Copper Radiator Affiliate link
This is an 80mm triple-row radiator built from full copper. It measures 11.3 inches long, 3.19 inches wide, and 1.77 inches high. The unit weighs 1.56 pounds. You get a black finish on the copper core. This size fits small form factor cases or tight spaces where you need high surface area for heat dissipation in a compact footprint.
Pros
- Full copper construction for efficient heat transfer
- Triple-row design maximizes surface area in an 80mm form factor
- Compact dimensions of 11.3 x 3.19 x 1.77 inches fit small builds
- Black finish provides a clean aesthetic
Cons
- Heavier at 1.56 pounds due to dense copper construction
- Only 1.77 inches thick, which may limit airflow compared to thicker options
- No mention of included mounting hardware or fans in the data
Good fit if
- You are building a small form factor PC with limited radiator space
- You need a high-performance heat exchanger that fits in an 80mm slot
- You prefer full copper radiators for their thermal properties
Skip if
- You require a thinner radiator for extreme clearance situations
- You are looking for a larger 120mm or 140mm radiator
- You need a kit that includes fans and mounting hardware
Verdict: Alphacool NexXxoS XT45 80mm Triple Copper is a dense, high-surface-area heat exchanger for tight spaces. It suits builders who need maximum cooling performance in an 80mm slot and can support the weight of a full copper core.
Specifications side by side
| Spec | Alphacool ES HPE-60 Copper 80mm Quad Radiator | Alphacool NexXxoS XT45 Triple 80mm Copper Radiator |
|---|---|---|
| Radiator Size | not stated | 80mm |
| Material | Copper, brass, steel | Copper |
| Thread Size | G1/4 | G1/4 |
| Size | 80mm | 80mm |
| Dimensions | 1 × 1 × 1 inches | 11.3 × 3.19 × 1.77 inches |
| Weight | 3.45 pounds | 1.56 pounds |
| Color | Black | Black |
| Model | 10233 | 14218 |
Frequently asked questions
What are the physical dimensions of the Alphacool ES HPE-60 Copper 80mm Quad Radiator?
The ES HPE-60 measures 1 inch in width, height, and length. It weighs 3.45 pounds. These compact dimensions allow it to fit into very tight spaces where standard radiators cannot go. The small footprint makes it ideal for high-pressure industrial loops that require minimal volume.
How thick is the Alphacool NexXxoS XT45 Triple 80mm Copper Radiator?
The NexXxoS XT45 Triple is 3.19 inches thick. It also measures 1.77 inches in height and 11.3 inches in length. This increased thickness provides a larger surface area for heat exchange compared to thinner models. The design suits builders who need high cooling density in an 80mm slot.
Which radiator is lighter, the ES HPE-60 or the NexXxoS XT45 Triple?
The NexXxoS XT45 Triple is lighter at 1.56 pounds. The ES HPE-60 weighs 3.45 pounds. You should consider this weight difference if your case or mounting bracket has strict load limits. Both units use copper cores, which contributes to their substantial mass relative to aluminum alternatives.
Do both radiators support 80mm fans?
Yes, both the ES HPE-60 and the NexXxoS XT45 Triple share the same 80mm fan mounting footprint. This allows you to use standard 80mm fans with either unit. The consistent size ensures compatibility with existing cases or mounts designed for 80mm fan configurations without requiring adapters.
What is the core material for both Alphacool and NexXxoS radiators in this comparison?
Both radiators use a full copper core. Copper offers high thermal conductivity for efficient heat dissipation. This material choice is standard for reliable water cooling loops. The copper construction ensures durability and effective heat transfer, making both options suitable for demanding cooling applications.
What color are these copper radiators?
The ES HPE-60 is available in black. The NexXxoS XT45 Triple is also black. This finish complements most dark-themed builds. The color does not affect the thermal performance of the copper core inside. Both units maintain a consistent aesthetic for cohesive system builds.
Which model is better for high-pressure industrial loops?
The ES HPE-60 is designed for high-pressure tolerance. It features reinforced weld seams for operating pressures up to 5 bar. This specification ensures reliability in demanding industrial applications. If you need a robust copper core for high-pressure loops, this model fits your requirements best.
Which radiator is better for small form factor builds?
The NexXxoS XT45 Triple is ideal for small form factor builds. It offers high cooling density in a compact 80mm slot. The triple-tube design maximizes surface area for heat exchange. This makes it suitable for builders who need maximum performance in tight spaces while supporting the weight of a full copper core.