Alphacool NexXxoS UT60 1080mm Copper Review: Who It Fits and Who Should Skip It
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This alphacool nexxxos ut60 1080mm copper review focuses on the physical realities of the NexXxoS UT60 Full Copper Nova Radiator. It is a massive cooling block with dimensions of 14.9 by 14.2 inches and a depth of 2.56 inches. The unit weighs 8.2 pounds, indicating substantial material use. Its defining specs are its 1080mm size, which supports nine 120mm fans, and its all-copper construction. Alphacool builds the end chambers, water channels, and fins from pure copper. This design aims to maximize heat dissipation for high-performance water cooling loops that require significant surface area for thermal exchange.
What stands out
- All-copper construction including end chambers, water channels, and fins
- Supports nine 120mm fans or four 180mm fans
- Dimensions of 14.9 x 14.2 x 2.56 inches
- Model number 14391 for precise identification
Who it fits
Good fit for
This radiator suits builders who have ample case space for a 1080mm unit. You should choose this if you want pure copper components for maximum thermal conductivity. It fits well in large cases where you can mount nine 120mm fans. The heavy weight of 8.2 pounds suggests a sturdy build for serious water cooling setups. It is ideal for users who prioritize material quality and surface area over compact form factors.
Who should skip it
Skip this if your case cannot accommodate a 14.9-inch wide radiator. The 2.56-inch depth may interfere with motherboard VRM heatsinks or RAM clearance. You should look elsewhere if you prefer aluminum radiators for lower weight. The 8.2-pound mass requires strong mounting points. This unit is not suitable for small form factor builds or setups where space is extremely limited.
Verdict: The Alphacool NexXxoS UT60 is a heavy, all-copper radiator designed for large cases and maximum cooling potential. It is best for builders with the space and need for a 1080mm footprint.
Key specs explained
Radiator Size: 1080mm
This dimension indicates the radiator supports nine 120mm fans or four 180mm fans. You gain a large surface area of 350 by 350 millimeters for heat dissipation. This layout suits cases with ample front or top mounting space. It provides a substantial cooling foundation for high-end custom loops. Compare this to standard 240mm or 360mm units if you need maximum thermal headroom for overclocking.
Material: Copper
The end chambers, water channels, and cooling fins are all constructed from pure copper. Copper offers superior thermal conductivity compared to aluminum alternatives. This material choice helps transfer heat from the coolant to the fins more efficiently. It is a key factor in the brand's reputation for performance. You benefit from consistent cooling results under heavy loads when using this material.
Weight: 8.2 pounds
This weight reflects the density of the pure copper construction. You must ensure your case mounts and fan brackets can support this mass without sagging. Heavy radiators often indicate robust internal structures and thicker tubing. Check your case specifications to verify load-bearing capacity. This feature is critical for maintaining stability in large custom loops over time.
Dimensions: 14.9 by 14.2 by 2.56 inches
These measurements define the physical footprint and depth of the unit. The width and length accommodate the fan array, while the 2.56-inch depth allows for sufficient fin density. You need to verify clearance around the motherboard and other components. This size is significantly larger than compact AIO coolers. Plan your component placement carefully to avoid interference with nearby hardware.
All-Copper Construction and Build
According to the listing, this Alphacool NexXxoS UT60 radiator is constructed entirely from copper. The end chambers, internal water channels, and cooling fins are all made of this material. This design choice prioritizes thermal conductivity over cost savings. You receive a unit that weighs 8.2 pounds. This significant mass suggests a dense core with substantial material volume. The heavy weight indicates robust structural integrity, which helps maintain flat surfaces under fan pressure. The finish retains the natural copper color, offering a distinct aesthetic without additional plating or paint layers.
The physical dimensions measure 14.9 inches in width and 14.2 inches in length. The depth is 2.56 inches, which corresponds to the 60mm thickness often referred to in fan sizes. This compact depth allows for better airflow clearance in tight cases, even though the overall footprint is large. The layout supports nine 120mm fans or four 180mm fans. This configuration provides a total cooling surface area of 350 by 350 millimeters. You need a case with ample space to accommodate this large surface area. The all-copper build ensures maximum heat transfer efficiency from the water to the fins. This construction suits users who demand peak performance and are willing to manage the weight and size constraints. There are no electronic controls or displays on the unit itself. It relies entirely on your pump and fan setup for operation.
Setup And Everyday Use Guide
Installing this radiator requires careful planning due to its substantial physical footprint. The unit measures 14.9 inches in width and 14.2 inches in length. With a depth of 2.56 inches, it occupies significant space within your case. You must verify that your chassis can accommodate these dimensions without obstructing other components. The 8.2-pound weight suggests a robust build, but you should ensure your mounting points can support this mass securely. Connection points are standard for this form factor, allowing you to attach tubing from your loop. The 1080mm size supports nine 120mm fans or four 180mm fans. This flexibility lets you choose the airflow configuration that best fits your case layout. You can mount it at the front or top, depending on your case design and cable management needs. Daily operation relies on the all-copper construction for efficient heat transfer. The pure copper end chambers and water channels provide consistent thermal performance. You do not need special maintenance beyond standard loop care. The material resists corrosion better than aluminum in closed-loop systems. You simply ensure the fans are running and the coolant is circulating. The large surface area allows for quiet operation at lower fan speeds. This setup prioritizes thermal efficiency over compactness. You gain maximum cooling potential for high-end processors. The straightforward design means fewer variables during assembly. You focus on fitting the large block into your chosen location. Once installed, the system provides reliable cooling for demanding workloads.
Check Compatibility Before Buying
This radiator demands careful integration into your loop. Its 14.9 by 14.2 inch footprint requires ample case space. You must verify that your chassis supports nine 120mm or four 180mm fans. The 2.56 inch depth may interfere with side panels or CPU coolers. Pure copper construction offers excellent thermal performance but requires specific fittings. Ensure your tubing inner diameter matches the port size. You will need high-quality thermal paste for your CPU block to match this cooling capacity. Regular maintenance is essential. Copper can corrode if mixed with incompatible coolants. Use distilled water and proper inhibitors. This unit suits enthusiasts building large custom loops. It is less ideal for compact cases or pre-built systems. Compare its size against other options in your guide. If space is limited, consider smaller radiators. This choice is for those prioritizing maximum heat dissipation over convenience.
Check before you buy
- Verify case supports nine 120mm fans
- Check clearance for 2.56 inch depth
- Ensure fittings match copper ports
- Confirm coolant compatibility with copper
The product at a glance
Alphacool NexXxoS UT60 1080mm Copper Radiator
Best for: High-performance custom loops needing 1080mm cooling
- Radiator Size
- 1080mm
- Material
- Copper
- Thread Size
- G1/4"
- Size
- 180mm
- Dimensions
- 14.2 × 14.9 × 2.56 inches
- Weight
- 8.2 pounds
View on Amazon: Alphacool NexXxoS UT60 1080mm Copper Radiator Affiliate link
This 1080mm radiator offers 350 by 350 by 60 mm of cooling surface. It supports nine 120mm fans or four 180mm fans. The unit is built entirely from copper, including the end chambers, water channels, and fins. It weighs 8.2 pounds and measures 14.9 inches wide. You get pure copper construction for maximum thermal performance. This fits custom loops that need high heat dissipation in a standard 120mm fan layout.
Pros
- Full copper construction for end chambers, channels, and fins
- Supports nine 120mm fans or four 180mm fans
- Large 350 x 350 x 60 mm cooling surface
- 1080mm size provides extensive heat exchange area
Cons
- Heavy 8.2-pound weight requires strong mounting support
- Copper material may require compatibility checks with other loop components
- No mention of included mounting hardware or fittings
Good fit if
- You need maximum cooling capacity from a 120mm fan pattern
- You are building a custom loop with compatible copper components
- You have space for a 1080mm radiator
Skip if
- You prefer aluminum radiators for weight savings
- You have limited case space for large radiators
- You want a pre-filled or plug-and-play cooling solution
Verdict: Alphacool NexXxoS UT60 1080mm Copper is a high-capacity cooling solution for enthusiasts who prioritize thermal performance and have the case space and mounting strength to support its weight. It suits custom loops built with compatible copper components.
Specifications side by side
| Spec | Alphacool NexXxoS UT60 1080mm Copper Radiator |
|---|---|
| Radiator Size | 1080mm |
| Material | Copper |
| Thread Size | G1/4" |
| Size | 180mm |
| Dimensions | 14.2 × 14.9 × 2.56 inches |
| Weight | 8.2 pounds |
| Color | Black |
| Model | 14391 |
Frequently asked questions
Is the Alphacool NexXxoS UT60 1080mm copper radiator heavy?
Yes, it weighs 8.2 pounds. This significant mass requires sturdy mounting points in your case. You must ensure your chassis can support this weight without sagging or damaging the motherboard. The dense copper construction contributes to this heft, prioritizing thermal capacity over lightweight design.
What fan configuration does this 1080mm radiator support?
It supports nine 120mm fans or four 180mm fans. The unit measures 14.9 inches in width and 14.2 inches in length. This layout provides a large surface area of 350 by 350 millimeters for efficient heat dissipation. Verify your case has space for this extensive fan array.
Does the Alphacool NexXxoS UT60 use copper or aluminum?
It is constructed entirely from copper. The end chambers, internal water channels, and cooling fins are all copper. This material choice prioritizes high thermal conductivity. Copper offers superior heat transfer properties compared to aluminum, making it ideal for enthusiasts seeking maximum cooling performance in custom loops.
Will this radiator fit in a standard mid-tower case?
It likely will not fit in most standard mid-towers. The unit measures 14.9 inches wide and 14.2 inches long with a 2.56-inch depth. This substantial footprint requires a large chassis with ample front or top mounting space. Check your case dimensions carefully before purchasing.
What is the model number for this Alphacool radiator?
The model number is 14391. This identifier helps you locate the correct product on retailer sites or in Alphacool catalogs. It distinguishes this specific 1080mm copper variant from other sizes or materials in the NexXxoS line. Use this number to ensure you receive the exact unit described.
Is this radiator suitable for high-performance custom loops?
Yes, it is designed for high-performance custom loops. Its large copper surface area and 1080mm size provide exceptional cooling capacity. This makes it suitable for enthusiasts who prioritize thermal performance and have the necessary case space. It handles high heat loads effectively when paired with appropriate fans.
How deep is the Alphacool NexXxoS UT60 radiator?
The radiator has a depth of 2.56 inches. This thickness affects airflow and clearance within your case. You must ensure there is enough room for this depth, especially if mounting it near side panels or other components. The depth contributes to the overall thermal mass and structural integrity.