Looking Beyond the Alphacool NexXxoS XT45 1260mm Copper? 6 Alternatives Worth a Look

How the alternatives compare

Alphacool NexXxoS XT45 180mm Triple Radiator

The NexXxoS XT45 180mm Triple is a compact copper radiator designed for space-constrained builds. At 23 inches wide and 7.17 inches long, it is significantly smaller than the 17.4-inch long original. This model weighs 4.73 pounds, making it much lighter than the 10.2-pound 1260mm version. It uses a 180mm size format, which limits its total cooling surface area. You should choose this option if your case cannot accommodate the larger 1260mm footprint. It retains the full copper construction for reliable heat dissipation. However, you sacrifice raw cooling capacity for a form factor that fits in small chassis. It is ideal for builders who prioritize fit over maximum thermal headroom.

Thermaltake Pacific C240 Copper Hard Tube Kit

The Thermaltake Pacific C240 Copper Hard Tube Kit includes a 240mm radiator rather than a 1260mm unit. This kit is an all-in-one solution for hard tube loops, prioritizing ease of assembly. It weighs less than the original Alphacool model, though specific weight data is not listed. The dimensions are 20.7 inches long and 16.1 inches wide. This product is best for users who want a complete copper aesthetic with DDC pump compatibility. You give up the massive surface area of the 1260mm radiator for a more manageable 240mm setup. It suits builders who value streamlined installation and copper fittings over extreme cooling potential. It is not a direct radiator replacement but a complete loop component set.

Alphacool NexXxoS UT60 1080mm Copper Radiator

The NexXxoS UT60 1080mm is a dense copper radiator measuring 14.2 inches long and 14.9 inches wide. It supports nine 120mm fans, whereas the original supports 140mm fans. This unit weighs 8.2 pounds, which is lighter than the 10.2-pound original. It offers high performance in a compact frame, prioritizing copper performance over maximum length. The height is 2.56 inches, making it thicker than the original. You should pick this if you need dense cooling in a smaller footprint. It provides similar material quality but with a different fan configuration. This option is ideal for builders who want strong thermal performance without the bulk of the 1260mm model. It fits compact high-performance loops well.

YXHGeeek RTX 4090 AMP Copper GPU Water Block

The YXHGeeek RTX 4090 AMP Copper GPU Water Block is a specialized component for Zotac RTX 4090 AMP graphics cards. It is not a radiator but a water block for GPU cooling. It measures 11.2 inches long and 6.2 inches wide. It weighs only 3.53 ounces, making it extremely lightweight to protect the PCB. This block features ARGB lighting and solid copper construction for targeted cooling of the core and VRAM. You would choose this if you need to cool a specific high-end GPU rather than a CPU loop. It differs entirely from the original radiator in function. It is best for builders who want lightweight, aesthetic cooling for their graphics card. It does not replace the radiator but complements a custom loop.

YXHGeeek RTX 4090 TUF Copper Water Block

The YXHGeeek RTX 4090 TUF Copper Water Block is designed for ASUS RTX 4090 TUF graphics cards. It features a thick copper plate for effective heat transfer. The dimensions are 8.6 inches long and 6.3 inches wide. It weighs 3.53 ounces, ensuring minimal stress on the motherboard. This block includes ARGB lighting for visual customization. You should select this option if you own an ASUS TUF card and need a dedicated GPU cooling solution. It is not a radiator and cannot replace the original Alphacool unit. It offers specific compatibility for ASUS PCB layouts. This product suits users who verify their hardware compatibility and want aesthetic ARGB lighting. It provides targeted cooling for the GPU core and memory modules.

YXHGeeek Gigabyte Aorus RTX Copper Water Block

The YXHGeeek Gigabyte Aorus RTX Copper Water Block is tailored for compatible Gigabyte Aorus graphics cards. It measures 9.1 inches long and 6.5 inches wide. The block weighs 3.53 ounces, providing a lightweight solution for heavy GPUs. It features ARGB lighting and solid copper construction for thermal performance. This component is designed to cover key components on specific Gigabyte hardware. You would choose this if you need a specialized block for your Aorus card. It differs from the original radiator by focusing on GPU cooling rather than loop heat rejection. It is best for builders who prioritize material quality and component protection. It does not offer universal compatibility but ensures a precise fit for supported Gigabyte models.

Quick picks

Our 7 picks

1 Best overall

Alphacool NexXxoS XT45 1260mm Copper Radiator

Best for: Large cases requiring high airflow cooling

Radiator Size

1260mm

Material

copper

Dimensions

17.4 × 16.6 × 1.89 inches

Weight

10.2 pounds

View on Amazon: Alphacool NexXxoS XT45 1260mm Copper Radiator Affiliate link

This 1260mm copper radiator from Alphacool is built for high airflow. It supports nine 140mm fans on the front and two 200mm fans on the back. The unit features 12 fins per inch and three G1/4" threads for your tubing. Weighing 10.2 pounds, it offers substantial cooling surface area. You should choose this if you need a large, passive cooling solution for a high-end build.

Pros

• Full copper construction for efficient heat transfer
• Supports up to nine 140mm front fans
• Includes three G1/4" threads for connections
• High density 12 fins per inch design

Cons

• Heavy at 10.2 pounds, requiring strong mounting
• Large 441 x 422 x 48 mm footprint
• No active pump or reservoir included

Good fit if

• You have a large case that fits 1260mm radiators
• You plan to use multiple 140mm fans
• You prefer passive copper cooling performance

Skip if

• You need a compact radiator for small cases
• You are looking for an all-in-one pump combo
• You prefer aluminum over copper material

Verdict: Alphacool NexXxoS XT45 1260mm Copper is a heavy, high-capacity cooling solution for builders with spacious cases and large fan arrays.

2 Best budget

Alphacool NexXxoS XT45 180mm Triple Radiator

Best for: Compact builds needing full copper cooling

Radiator Size

180mm

Material

Copper, steel housing

Thread Size

G1/4

Dimensions

7.17 × 23 × 1.77 inches

Weight

4.73 pounds

View on Amazon: Alphacool NexXxoS XT45 180mm Triple Radiator Affiliate link

This 180mm radiator from Alphacool uses full copper construction for efficient heat dissipation. It measures 7.17 inches in length and 1.77 inches in height. The unit weighs 4.73 pounds, indicating a solid build. You should consider this if you need a compact cooling solution for smaller cases or specific loop configurations. It offers a balance of size and thermal capacity.

Pros

• Full copper construction for reliable thermal performance
• Compact 180mm size fits tight spaces
• Slim 1.77-inch height reduces clearance issues
• Solid 4.73-pound weight suggests durability

Cons

• Smaller surface area compared to 240mm or 280mm radiators
• Single fan size limits airflow options
• No mention of included mounting hardware or fittings

Good fit if

• You have limited case space for larger radiators
• You prefer full copper construction for longevity
• You need a compact radiator for a custom loop

Skip if

• You require maximum cooling performance for high-end CPUs
• You want to use multiple fans for higher airflow
• You need a radiator with included accessories

Verdict: Alphacool NexXxoS XT45 180mm Copper is a compact, full-copper radiator suited for builders with space constraints who prioritize build quality over maximum cooling capacity. It fits well in small form factor builds where larger radiators do not fit.

3 Best premium

Thermaltake Pacific C240 Copper Hard Tube Kit

Best for: complete 240mm hard tube loops with copper fittings

Radiator Size

240mm

Socket Compatibility

LGA1700

Lighting

RGB

Material

Copper

Pump Compatibility

DDC

Size

240mm Radiator

View on Amazon: Thermaltake Pacific C240 Copper Hard Tube Kit Affiliate link

This Thermaltake kit pairs a 240mm copper radiator with a DDC pump/reservoir combo and an RGB CPU block. It includes fittings, tubing, and clear coolant for a complete hard tube loop. The 27mm thick radiator fits most chassis and supports LGA1700 sockets. You get a full system ready for installation without buying separate components.

Pros

• 240mm copper radiator with 17 fins per inch
• Includes DDC pump/reservoir and RGB CPU block
• C-pro fittings with four built-in O-rings
• Comes with fittings, tubing, and coolant

Cons

• 240mm size offers less cooling area than 1260mm radiators
• Slim 27mm thickness may limit flow in complex loops
• No mention of software control for RGB or pump speed

Good fit if

• You want a complete hard tube kit with all necessary parts
• You are building a loop for an LGA1700 processor
• You prefer the look of copper fittings and clear coolant

Skip if

• You need a 360mm or larger radiator for high heat loads
• You want to use soft tubing instead of hard PETG
• You require software control for fan and pump speeds

Verdict: Thermaltake Pacific C240 Copper Hard Tube Kit is a solid choice for builders who want a complete, all-in-one solution for a 240mm loop. It fits users who prioritize ease of assembly and copper aesthetics over maximum cooling capacity.

4 Also great

Alphacool NexXxoS UT60 1080mm Copper Radiator

Best for: Compact high-performance copper cooling loops

Radiator Size

1080mm

Material

Copper

Thread Size

G1/4"

Size

180mm

Dimensions

14.2 × 14.9 × 2.56 inches

Weight

8.2 pounds

View on Amazon: Alphacool NexXxoS UT60 1080mm Copper Radiator Affiliate link

The Alphacool NexXxoS UT60 is a 1080mm full copper radiator designed for high-density cooling. It supports nine 120mm fans or four 180mm fans. The unit measures 14.9 by 2.56 inches and weighs 8.2 pounds. You get pure copper end chambers, water channels, and cooling fins. This build provides a large cooling surface for your loop. It suits users who need reliable heat dissipation in a compact footprint.

Pros

• Full copper construction for end chambers, channels, and fins
• Supports nine 120mm or four 180mm fans
• High-density 60mm thickness for maximum surface area
• Compact 1080mm length fits tight cases

Cons

• Smaller 1080mm size compared to 1260mm alternatives
• Heavier 8.2-pound build requires strong mounting
• No mention of included mounting hardware or fittings

Good fit if

• You need a high-performance copper radiator
• You have space for a 1080mm unit
• You prefer full copper over aluminum cores

Skip if

• You require a 1260mm or larger radiator
• You need a lightweight aluminum option
• You are building a small form factor PC

Verdict: Alphacool NexXxoS UT60 1080mm Copper delivers dense cooling in a compact frame. It fits builders who prioritize copper performance over maximum length.

5 Also great

YXHGeeek RTX 4090 AMP Copper GPU Water Block

Best for: Zotac RTX 4090 AMP custom cooling

Lighting

5V ARGB

Material

Copper

Dimensions

11.2 × 6.2 × 1 inches

Weight

3.53 ounces

View on Amazon: YXHGeeek RTX 4090 AMP Copper GPU Water Block Affiliate link

This copper GPU water block is designed for the Zotac GeForce RTX 4090 AMP. It features a 10mm thick copper plate with ARGB lighting. The design uses a three-layer structure to improve heat dissipation for the GPU core, VRAM, and power MOS. Weighing only 3.53 ounces, it reduces cold head weight to protect your PCB from deformation. You need to verify your specific PCB layout matches the product images for compatibility.

Pros

• 10mm thick copper plate for effective heat transfer
• ARGB lighting support for system aesthetics
• Lightweight 3.53 oz design to reduce PCB stress
• Optimized fluid channels cover GPU, VRAM, and MOS

Cons

• Limited to Zotac RTX 4090 AMP models only
• No included pump or reservoir for a complete loop
• Requires manual verification of PCB compatibility

Good fit if

• You own a Zotac GeForce RTX 4090 AMP
• You want a lightweight copper block for your GPU
• You prefer ARGB lighting in your cooling loop

Skip if

• You use a different RTX 4090 manufacturer
• You need a block for a different GPU series
• You want an all-in-one solution with a pump

Verdict: YXHGeeek RTX 4090 AMP Copper Block fits Zotac RTX 4090 AMP owners seeking a lightweight copper block with ARGB lighting. It delivers targeted cooling for the core and VRAM while minimizing weight to protect the PCB.

6 Also great

YXHGeeek RTX 4090 TUF Copper Water Block

Best for: ASUS RTX 4090 TUF owners

Lighting

5V ARGB

Material

Copper

Dimensions

8.6 × 6.3 × 1.1 inches

Weight

3.53 ounces

View on Amazon: YXHGeeek RTX 4090 TUF Copper Water Block Affiliate link

This block targets the ASUS GeForce RTX 4090 TUF. It uses a 10mm thick copper plate for heat transfer. The design includes ARGB lighting. It covers the GPU core, VRAM, and power MOS. The block weighs 3.53 ounces. You need to verify your specific PCB matches the listing images. It suits users seeking a direct copper solution for high-end cards.

Pros

• 10mm thick copper plate for heat dissipation
• Covers GPU core, VRAM, and power MOS
• ARGB lighting support
• Lightweight design at 3.53 ounces

Cons

• Requires manual compatibility check against PCB images
• No mention of included mounting hardware or tools
• Limited to ASUS RTX 4090 TUF models only

Good fit if

• You own an ASUS GeForce RTX 4090 TUF
• You want a pure copper cold plate
• You prefer ARGB lighting integration

Skip if

• You have a different RTX 4090 model variant
• You need a block for multiple card types
• You require pre-installed mounting hardware

Verdict: YXHGeeek RTX 4090 TUF Copper Block offers a thick copper plate for specific ASUS cards. It fits users who verify their PCB layout and want ARGB lighting.

7

YXHGeeek Gigabyte Aorus RTX Copper Water Block

Best for: Compatible Gigabyte Aorus RTX GPUs

Lighting

5V ARGB

Material

Copper

Dimensions

9.1 × 6.5 × 0.9 inches

Weight

3.53 ounces

View on Amazon: YXHGeeek Gigabyte Aorus RTX Copper Water Block Affiliate link

This YXHGeeek block targets specific Gigabyte Aorus GeForce RTX cards. It uses a 10mm thick copper plate with a three-layer structure to improve heat dissipation. The design covers the GPU core, VRAM, and MOS. It weighs 3.53 ounces and measures 9.1 by 6.5 inches. ARGB lighting adds visual appeal. You should verify your exact card model for compatibility before buying.

Pros

• 10mm thick copper plate for robust heat transfer
• Covers GPU core, VRAM, and power supply MOS
• ARGB lighting support
• Lightweight 3.53-ounce design reduces PCB stress

Cons

• Limited to specific Gigabyte Aorus RTX models
• No included pump or reservoir
• Requires manual compatibility verification

Good fit if

• You own a compatible Gigabyte Aorus RTX card
• You want a thick copper cooling base
• You prefer lightweight blocks to protect PCBs

Skip if

• You need a universal fit for all GPUs
• You want an all-in-one cooling solution
• You have a non-Aorus graphics card

Verdict: YXHGeeek RTX Copper GPU Block is a specialized cooling solution for users with compatible Gigabyte Aorus hardware. It offers solid copper thickness and coverage for key components. It suits builders who prioritize material quality and component protection over universal compatibility.

Specifications side by side

Frequently asked questions

See also

• bulbhead red copper 10 PC alternatives
• signature hardware 480148 thaine 70 copper alternatives