Alphacool NexXxoS XT45 Quad Full Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This alphacool nexxxos xt45 quad full review examines a massive copper cooling solution designed for high-end loops. The Alphacool NexXxoS XT45 Quad Full Copper Radiator measures 12.7 inches wide and 1.93 inches tall. It offers 280 x 280 x 45 mm of pure cooling surface. This size supports four 120mm or 140mm fans on one side, or eight fans double-sided. The unit weighs 5.88 pounds. We look at how its all-copper construction and large surface area impact thermal performance for your system.
What stands out
- Pure copper end chambers, water channels, and cooling fins for maximum thermal conductivity.
- Supports eight fans double-sided or four fans single-sided for flexible mounting.
- Dimensions of 12.7 x 11 x 1.93 inches provide substantial heat dissipation area.
- Model 14396 is built without aluminum compromises, using only copper components.
Who it fits
Good fit for
You should choose this radiator if you have a large case with ample space for a 480mm or 560mm block. It suits enthusiasts building extreme water cooling loops who prioritize pure copper construction for its superior heat transfer properties. If you plan to mount eight fans double-sided or four single-sided, this unit provides the necessary surface area. It is ideal for users who want a robust, heavy-duty foundation for their custom cooling system without relying on aluminum cores.
Who should skip it
You should look at another option if your case cannot accommodate a 12.7-inch wide radiator. The 5.88-pound weight requires strong mounting points to support the heavy copper construction. If you need a lightweight solution for a small form factor build, this unit is too large and dense. Additionally, if you prefer aluminum radiators for cost or weight reasons, this all-copper model may not fit your preferences. Ensure you have the physical space and structural support before proceeding.
Verdict: The Alphacool NexXxoS XT45 Quad is a heavy-duty copper radiator for large cases. It offers excellent thermal capacity for ambitious custom loops.
Key specs explained
Size: 120 or 140mm
This radiator supports two standard fan dimensions. You can install either 120mm or 140mm fans on its surface. This flexibility helps you match existing fans or choose the best fit for your case. It allows you to maximize airflow without buying specialized hardware. Check your case compatibility before selecting fan size.
Material: Copper
The end chambers, water channels, and cooling fins are all made of pure copper. Copper conducts heat better than aluminum, which helps transfer thermal energy from the coolant to the air more efficiently. This material choice is common in high-performance custom loops. It ensures better heat dissipation for your components over time.
Dimensions: 12.7 inches wide, 1.93 inches tall
These physical measurements define the footprint and profile of the radiator. The 12.7-inch width requires a wide mounting area in your case. The 1.93-inch height indicates a standard thickness that fits most standard radiator mounts. Measure your available space carefully. Ensure your case has enough clearance for this specific width and height combination.
Weight: 5.88 pounds
This weight reflects the density of the copper construction. A heavier radiator often indicates more metal and potentially better heat capacity. However, you must ensure your case and mounting points can support this load. Heavy radiators can sag if not supported properly. Verify your case supports this weight to avoid stress on fittings or tubes.
Design and Build Quality
According to the listing, this unit is constructed entirely from copper. The end chambers, water channels, and cooling fins are all made of this material. This choice prioritizes thermal conductivity over weight reduction. You get a dense block of metal that transfers heat efficiently from the coolant to the fins. The finish is not described, so you should assume it is bare copper unless stated otherwise. This means you may need to apply protective coatings if you plan to use it in humid environments without proper loop chemistry management.
The physical dimensions are substantial. It measures 12.7 inches wide and 11 inches long, with a thickness of 1.93 inches. The weight is listed at 5.88 pounds. This mass provides rigidity but requires strong mounting points in your case. You must ensure your chassis can support this load without bending or vibrating. The layout accommodates eight fans double-sided or four single-sided. This quad design allows for high airflow density. You need a case with ample space to fit this large surface area. The 45 mm thickness is standard for high-performance radiators, balancing depth with cooling capacity. Ensure your pump and tubing can handle the flow requirements of such a large core.
Installation and Daily Operation
Setting up this Alphacool NexXxoS XT45 Quad requires careful planning due to its substantial footprint. The unit measures 12.7 inches wide and 11 inches long. You must verify that your case has sufficient clearance for this large surface area. The thickness is 1.93 inches, which accounts for the copper construction and fin density. You need to accommodate four 120mm or 140mm fans on one side, or eight fans if you mount them on both sides. This configuration demands a robust case structure to support the 5.88-pound weight without sagging. The pure copper end chambers and water channels require compatible fittings and tubing. You should use copper-safe coolants to maintain the integrity of the internal water channels. The dense copper fins provide high thermal mass, which means the radiator heats up slowly but retains heat longer than aluminum units. This characteristic affects how you manage pump speeds and fan curves during daily use. You will notice steady temperature regulation rather than rapid spikes. The large surface area allows for efficient heat dissipation even at lower fan speeds. This setup suits builders who prioritize thermal capacity over compactness. You benefit from a stable cooling environment that handles sustained loads effectively. The all-copper design ensures consistent performance over time, provided you maintain the loop correctly. You do not need to worry about galvanic corrosion if you use appropriate dielectric fluids. The simplicity of the copper block means fewer points of failure compared to complex composite designs. Your system will run quietly if you optimize fan curves for the high thermal mass.
Before You Buy This Radiator
You should verify your case dimensions carefully before purchasing. This unit requires significant space, measuring 12.7 inches wide and 11 inches long. You must ensure your chassis can accommodate this footprint without obstructing other components. Since the radiator is constructed entirely from copper, you need compatible fittings and tubing. Brass or steel fittings may cause galvanic corrosion if not properly isolated. You should plan your loop layout to allow for easy maintenance. The dense fin structure collects dust over time. You will need to clean it periodically to maintain airflow efficiency. This product suits builders who prioritize maximum thermal performance and have the physical space to support it. It stands apart from standard options by offering a massive cooling surface area. You gain substantial heat dissipation capacity, but at the cost of increased weight and size. Ensure your fans match the 120mm or 140mm mounting holes. Proper planning prevents installation headaches later.
Check before you buy
- Verify your case has enough clearance for the 12.7-inch width.
- Check that your loop components are compatible with pure copper.
- Confirm your fans fit the 120mm or 140mm mounting pattern.
- Ensure your PSU shroud does not block the radiator length.
The product at a glance
Alphacool NexXxoS XT45 Quad Full Copper Radiator
Best for: High-performance builds with ample case space
- Radiator Size
- 480mm, 560mm
- Material
- Copper
- Thread Size
- G1/4"
- Dimensions
- 11 × 12.7 × 1.93 inches
- Weight
- 5.88 pounds
View on Amazon: Alphacool NexXxoS XT45 Quad Full Copper Radiator Affiliate link
This radiator offers a massive cooling surface area of 280 x 280 x 45 mm. It supports four 120mm or 140mm fans on one side, or eight fans double-sided. The entire construction, including end chambers and fins, uses pure copper. It measures 12.7 inches wide and weighs 5.88 pounds. You get high thermal capacity for demanding liquid cooling loops.
Pros
- Pure copper construction for end chambers, channels, and fins
- Supports four 120mm or 140mm fans single-sided
- Supports eight fans double-sided configuration
- Large 480/560mm form factor for maximum surface area
Cons
- Heavy at 5.88 pounds, requiring strong mounting support
- Large physical footprint may not fit smaller cases
- No mention of included mounting hardware or fans
Good fit if
- You need maximum cooling capacity for high-end CPUs
- You have a large case with space for a 480/560mm radiator
- You prefer pure copper components for thermal performance
Skip if
- You are building in a compact ITX case
- You need a lightweight radiator for portable builds
- You prefer aluminum radiators for weight savings
Verdict: Alphacool NexXxoS XT45 Quad Copper Radiator is a heavy-duty cooling solution for enthusiasts who prioritize maximum thermal performance and have the case space to accommodate its large size and weight.
Specifications side by side
| Spec | Alphacool NexXxoS XT45 Quad Full Copper Radiator |
|---|---|
| Radiator Size | 480mm, 560mm |
| Material | Copper |
| Thread Size | G1/4" |
| Dimensions | 11 × 12.7 × 1.93 inches |
| Weight | 5.88 pounds |
| Size | 120 or 140mm |
| Color | Black |
| Model | 14396 |
Frequently asked questions
Does the Alphacool NexXxoS XT45 Quad support both 120mm and 140mm fans?
Yes, this radiator is designed to accommodate both 120mm and 140mm fan sizes. This flexibility allows you to use the fans you already own or select the optimal airflow option for your specific case constraints. You are not locked into a single fan dimension for installation.
How much does the Alphacool NexXxoS XT45 Quad weigh?
The unit weighs 5.88 pounds. This significant mass results from its all-copper construction, which includes the end chambers, water channels, and cooling fins. You must ensure your case mounting points can support this weight without sagging or stress over time.
What are the exact dimensions of the Alphacool NexXxoS XT45 Quad radiator?
The radiator measures 12.7 inches in width, 11 inches in length, and 1.93 inches in height. These dimensions define the physical footprint required in your chassis. You need to verify that your case interior can clear these measurements for both the radiator and attached fans.
Is the Alphacool NexXxoS XT45 Quad made entirely of copper?
Yes, the listing specifies that the material is copper. The end chambers, internal water channels, and external cooling fins are all constructed from this metal. This design prioritizes thermal conductivity, which can enhance heat dissipation compared to aluminum alternatives.
What is the model number for the Alphacool NexXxoS XT45 Quad?
The model number is 14396. You can use this identifier to verify compatibility with your existing loop components or to locate specific mounting hardware and accessories from Alphacool. It helps ensure you are purchasing the exact variant described in this review.
Who is the best audience for this radiator?
This radiator is best for high-performance builds with ample case space. It suits enthusiasts who prioritize maximum thermal performance and have the physical room to accommodate its large size and heavy weight. It is ideal for custom loops where space is not the primary constraint.