The Best Bykski Aio Liquid Coolers in 2026: 15 Picks
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
When you evaluate a bykski aio liquid cooler option, you find parts built for targeted cooling setups. The Bykski lineup includes chassis-specific distro plates with DDC pump mounts, cylindrical 200mm reservoirs, CPU blocks, GPU water blocks, and passive heatsinks in transparent, frosted, or black finishes with RGB and ARGB lighting.
The Bykski O11 Dynamic XL Distro Plate with DDC Pump earns the top spot by providing dedicated coolant routing and inline pumping for Lian Li O11 Dynamic XL custom loops. We compared 15 products strictly using the specifications published on their listings to help you select the right fit.
Quick picks
Our 15 picks
Bykski O11 Dynamic XL Distro Plate with DDC Pump
Best for: Lian Li O11 Dynamic XL custom loops
- Lighting Type
- Addressable RGB
- Pump Compatibility
- DDC
- Dimensions
- 16.7 × 5.67 × 1.32 inches
- Weight
- 10 pounds
View on Amazon: Bykski O11 Dynamic XL Distro Plate with DDC Pump
This distribution plate features a PMMA acrylic body, integrated 5V addressable RGB lighting, and an included DDC pump with armor. Built specifically for the Lian Li O11 Dynamic XL chassis, it organizes liquid cooling loops with direct port routing. You must pair it with radiators up to 30mm thick. It fits your build if you want an all-in-one reservoir and pump layout engineered strictly for this specific full-tower case.
Pros
- Includes integrated DDC pump with heatsink armor
- Constructed from clear PMMA acrylic
- Equipped with a 5V addressable RGB LED strip
- Ships fully assembled with mounting hardware
Cons
- Fits only the Lian Li O11 Dynamic XL case
- Limits installed radiator thickness to 30mm
- Weighs 10 pounds without fluid
Good fit if
- You build inside a Lian Li O11 Dynamic XL case.
- You need an integrated DDC pump and reservoir unit.
- You plan to run radiators measuring 30mm or thinner.
Skip if
- You use any computer case other than the O11 Dynamic XL.
- You intend to install radiators thicker than 30mm.
Verdict: Bykski Lian Li O11 Dynamic XL Distro Plate with DDC Pump delivers dedicated routing and inline pumping for this specific chassis. Its acrylic design and integrated lighting keep tubing runs direct and organized.
Bykski InWin 925 Distro Plate with DDC Pump
Best for: InWin 925 custom liquid cooling loops
- Lighting Type
- Addressable RGB
- Pump Compatibility
- DDC
- Dimensions
- 14.9 × 5.24 × 1.32 inches
- Weight
- 10 pounds
This distribution plate is a dedicated custom loop component built specifically for your InWin 925 chassis. It features a PMMA acrylic body, an integrated DDC pump with an armor heatsink, and a 5V addressable RGB LED strip. It measures 14.88 inches long and supports radiators up to 30mm thick. You get a pre-assembled reservoir and pump unit that simplifies your tube routing if you build inside an InWin 925 case.
Pros
- Includes integrated DDC pump with armor heatsink
- Built-in 5V addressable RGB LED strip
- Full PMMA acrylic body ships pre-assembled with mounting hardware
- Backed by a 1-year manufacturer warranty
Cons
- Restricted specifically to the InWin 925 chassis
- Limits radiator thickness to a maximum of 30mm
- Heavy unit at 10 pounds
Good fit if
- You build a custom liquid cooling loop inside an InWin 925 case.
- You want an integrated DDC pump and distribution reservoir to streamline tube routing.
- You plan to run radiators that do not exceed 30mm in thickness.
Skip if
- You build in any PC chassis other than the InWin 925.
- You require radiators thicker than 30mm in your cooling loop.
Verdict: Bykski InWin 925 Distro Plate with DDC Pump provides an integrated PMMA reservoir and pump solution tailored specifically for InWin 925 builds. It organizes custom loop routing efficiently as long as your radiators stay within the 30mm thickness limit.
Bykski Phanteks Evolv Shift X Distro Plate
Best for: Phanteks Evolv Shift X custom loop builds
- Lighting Type
- Addressable RGB
- Pump Compatibility
- DDC
- Dimensions
- 12 × 6.1 × 1.24 inches
- Weight
- 10 pounds
This distribution plate replaces conventional reservoirs to organize your custom cooling loop inside a Phanteks Evolv Shift X case. Built from transparent PMMA acrylic, it features integrated 5V addressable RGB lighting and mounts an inline DDC pump. It routes fluid through dedicated channels to streamline your tubing runs. You should choose this unit if you want clean parallel tube routing and your installed radiator does not exceed 30mm in thickness.
Pros
- Built-in 5V addressable RGB LED strip
- Transparent PMMA acrylic construction
- Supports inline DDC pump installation
- Pre-assembled with included mounting hardware
Cons
- Restricted to Phanteks Evolv Shift X chassis
- Limits radiator thickness to a maximum of 30mm
Good fit if
- You build inside a Phanteks Evolv Shift X case.
- You plan to integrate an inline DDC pump.
- You use radiators with a thickness of 30mm or less.
Skip if
- You use any computer case other than the Phanteks 217XE.
- You need a radiator thicker than 30mm in your cooling loop.
Verdict: Bykski Phanteks Evolv Shift X PMMA Distro Plate delivers dedicated routing channels and 5V addressable RGB lighting for Phanteks 217XE builds. It keeps custom liquid cooling loops tidy as long as your radiator does not exceed 30mm.
Bykski Cougar Blazer Distro Plate with DDC Pump
Best for: Cougar Blazer custom liquid cooling loops
- Lighting
- RGB
- Pump Compatibility
- DDC
- Dimensions
- 14.2 × 4.13 × 1.32 inches
- Weight
- 10 pounds
View on Amazon: Bykski Cougar Blazer Distro Plate with DDC Pump
This distribution plate simplifies your custom liquid loop by combining routing channels, a reservoir, and an integrated DDC pump into a single acrylic unit. Built specifically for the Cougar Blazer chassis, it features full PMMA construction, integrated 5V addressable RGB lighting, and bundled mounting hardware. It suits you if you want clean, parallel tubing runs and have radiators measuring up to 30mm thick.
Pros
- Integrated DDC pump equipped with heatsink armor
- Pre-installed 5V addressable RGB LED lighting strip
- Full PMMA acrylic body with bundled mounting hardware
- Dedicated layout designed specifically for the Cougar Blazer chassis
Cons
- Incompatible with cases other than the Cougar Blazer
- Restricts radiator thickness to a maximum of 30mm
- Heavy total weight of 10 pounds
Good fit if
- You build a custom liquid cooling loop inside a Cougar Blazer case.
- You want an integrated DDC pump and distro plate combination.
- You plan to use radiators that do not exceed 30mm in thickness.
Skip if
- You use any PC case other than the Cougar Blazer.
- You plan to run radiators thicker than 30mm.
Verdict: Bykski Cougar Blazer Distro Plate with DDC Pump streamlines custom cooling loops specifically inside the Cougar Blazer chassis. Its integrated DDC pump, PMMA acrylic build, and 5V addressable lighting replace separate reservoirs and pumps.
Bykski Aluminum M.2 SSD Heatsink Armor
Best for: basic M.2 SSD passive heat dissipation
- Dimensions
- 0.17 × 0.12 × 0.06 inches
- Weight
- 1 pounds
You get an aluminum heatsink cover designed for M.2 SSD storage drives. This unit features an anodized black finish and provides passive drive armor without requiring liquid tubing or complex wiring. It lists dimensions of 0.167 inches long, 0.118 inches wide, and 0.059 inches high, weighing 1 pound. It suits you if you want a basic hardware addition for an M.2 drive inside your Bykski system setup.
Pros
- Black anodized aluminum finish
- Designed for M.2 SSD drives
- Easy install design
- 1 pound listed weight
Cons
- Passive armor with no liquid cooling channels
- No integrated RGB lighting listed
Good fit if
- You need a basic passive aluminum armor cover for an M.2 SSD.
- You want an easy-install component with a black anodized finish.
Skip if
- You need an active liquid cooling block connected to your loop.
- You require built-in addressable RGB lighting for drive illumination.
Verdict: Bykski Aluminum M.2 SSD Heatsink Armor provides simple passive drive protection with an anodized black finish. It offers a straightforward installation for standard M.2 SSD units without needing liquid loop integration.
Bykski Sapphire RX 5700 XT Nitro+ GPU Water Block
Best for: Sapphire RX 5700 XT Nitro+ custom loops
- Dimensions
- 11.8 × 7.11 × 2.05 inches
- Weight
- 5 pounds
View on Amazon: Bykski Sapphire RX 5700 XT Nitro+ GPU Water Block
This GPU water block cools Sapphire RX 5700 XT Nitro+ graphics cards inside a custom loop. You get a clear top with integrated RBW lighting and compatibility with standard G1/4 thread fittings. The unit measures 11.83 inches long, 7.11 inches wide, and 2.05 inches tall while weighing 5 pounds. It supports multi-GPU Crossfire setups. This block fits your build if you need dedicated liquid cooling for this card.
Pros
- Fits standard G1/4 thread fittings
- Crossfire compliant for multi-GPU setups
- Clear top design with built-in RBW lighting
- Full-coverage block tailored for Sapphire RX 5700 XT Nitro+
Cons
- Weighs 5 pounds, adding notable weight to the PCIe slot
- Fits only the Sapphire RX 5700 XT Nitro+ card layout
- Large 11.83-inch length needs ample clearance inside your chassis
Good fit if
- You run a Sapphire RX 5700 XT Nitro+ graphics card.
- You build with standard G1/4 threaded cooling components.
- You want clear construction with integrated RBW lighting.
Skip if
- You use a reference design or any other GPU model.
- You have a compact case with under 11.83 inches of GPU clearance.
Verdict: Bykski Sapphire RX 5700 XT Nitro+ GPU Water Block delivers full-coverage cooling with standard G1/4 ports and RBW lighting. It serves as an exact-fit liquid block specifically for this graphics card.
Bykski Lian Li O11 Distro Plate with RGB
Best for: Lian Li O11 dual-radiator custom loops
- Lighting Type
- A-RGB (RBW)
- Pump Compatibility
- DDC
- Dimensions
- 13.5 × 5.22 × 1.32 inches
- Weight
- 10 pounds
This Bykski distribution plate replaces standard reservoir setups in your Lian Li O11 chassis. Built from PMMA acrylic, it supports double 360 mm radiators with maximum thicknesses up to 30 mm. It includes integrated 5V addressable RGB lighting and works with inline DDC pumps. If you want cleanly routed cooling lines and direct mounting in your O11 build without custom bracket fabrication, this component matches your loop.
Pros
- Supports double 360 radiators up to 30 mm thick
- Integrated 5V addressable RGB LED strip
- Constructed from clear PMMA acrylic
- Compatible with inline DDC pumps
Cons
- Limits radiator thickness to 30 mm maximum
- Not recommended for cases other than the Lian Li O11
Good fit if
- You build inside a Lian Li O11 chassis.
- You run dual 360 mm radiators measuring 30 mm thick or less.
- You plan to integrate a DDC pump directly into your distribution reservoir.
Skip if
- You use a PC case other than the Lian Li O11.
- You require radiators thicker than 30 mm in your cooling loop.
Verdict: Bykski Lian Li O11 Dual 360 Distro Plate provides a dedicated PMMA routing hub and 5V RGB lighting tailored specifically for the Lian Li O11 chassis. It streamlines dual 360 mm radiator loops while supporting standard DDC pump configurations.
Bykski TT Level 20 XT Distro Plate with RGB
Best for: Thermaltake Level 20 XT custom loop builds
- Lighting Type
- A-RGB (RBW)
- Pump Compatibility
- DDC
- Dimensions
- 13.8 × 7.93 × 1.32 inches
- Weight
- 10 pounds
This PMMA acrylic distribution plate mounts inside the Thermaltake Level 20 XT case to streamline your custom liquid cooling loop. It features integrated 5V addressable RGB lighting and supports an inline DDC pump with an armor heatsink. You get dedicated routing channels designed for parallel tubing runs. It suits you if you build a custom loop in this specific chassis and use radiators up to 30mm thick.
Pros
- Built specifically for the Thermaltake Level 20 XT chassis
- Integrated 5V addressable RGB LED lighting strip
- Pre-assembled transparent PMMA acrylic construction
- Supports inline DDC pumps with heatsink armor
Cons
- Restricted to radiators 30mm thick or less
- Incompatible with computer cases other than the TT Level 20 XT
- Heavy unit weight of 10 pounds
Good fit if
- You build a custom water loop inside a Thermaltake Level 20 XT case.
- You plan to use radiators measuring 30mm thick or less.
- You want parallel tubing runs powered by an inline DDC pump.
Skip if
- You use any computer chassis other than the Thermaltake Level 20 XT.
- You require radiators thicker than 30mm in your cooling loop.
Verdict: Bykski TT Level 20 XT Distro Plate delivers a dedicated routing reservoir built exclusively for the Thermaltake Level 20 XT chassis. It organizes your cooling loop using clear PMMA construction, 5V addressable RGB lighting, and integrated DDC pump mounting.
Bykski Intel CPU Water Block
Best for: custom liquid loops on Intel processors
- Socket Compatibility
- Intel LGA 1200/1700 - 115x - 2011/2066
- Dimensions
- 7 × 12 × 4 inches
- Weight
- 1.5 pounds
This Bykski Intel CPU Water Block is a dedicated cooling component for custom liquid loops. It features a nickel-plated copper base and a 0.2mm spray-type micro-channel design to optimize coolant flow over your processor. The package includes mounting hardware and thermal paste for Intel LGA 1700, 1200, 115x, and 2011/2066 sockets. It suits you if you are building an Intel-based open loop rather than using an all-in-one cooler.
Pros
- Nickel-plated copper base offers corrosion resistance
- 0.2mm spray-type micro-channel structure maximizes surface area
- Includes thermal paste and full installation hardware
- Supports Intel LGA 1700, 1200, 115x, and 2011/2066 sockets
Cons
- No AMD socket mounting hardware included
- Requires a separate pump, radiator, and tubing setup
Good fit if
- You run an Intel CPU on LGA 1700, 1200, 115x, or 2011/2066.
- You are assembling an open-loop custom liquid cooling system.
Skip if
- You build with an AMD processor socket.
- You want a fully assembled all-in-one closed liquid cooler.
Verdict: Bykski Intel CPU Water Block provides nickel-plated copper construction and 0.2mm micro-channels for custom Intel loops. It is a solid pick if you need a dedicated block supplied with mounting hardware and thermal paste.
Bykski Lian Li Ghost Axe Distro Plate with DDC Pump
Best for: Lian Li Ghost Axe custom loop builds
- Lighting Type
- 5v Addressable RGB (RBW)
- Pump Compatibility
- DDC
- Dimensions
- 11.6 × 4.96 × 1.32 inches
- Weight
- 10 pounds
View on Amazon: Bykski Lian Li Ghost Axe Distro Plate with DDC Pump
This acrylic PMMA distribution plate features an integrated DDC pump with an armor heatsink and built-in 5V addressable RGB lighting. Designed specifically for the Lian Li Ghost Axe chassis, it replaces separate reservoir and pump units to streamline loop tubing runs. It measures roughly 11.58 by 4.96 inches and requires installed radiators to remain under 30mm thick. It suits you if you want clean, direct tube routing in this specific case.
Pros
- Includes integrated DDC pump with armored heatsink
- Built-in 5V addressable RGB LED lighting strip
- Full acrylic PMMA construction with mounting hardware included
- Pre-aligned port layout reduces complex tubing bends
Cons
- Compatible only with the Lian Li Ghost Axe chassis
- Limits installed radiator thickness to 30mm
- Heavy unit at 10 pounds before coolant
Good fit if
- You build a custom liquid cooling loop inside a Lian Li Ghost Axe case.
- You want an integrated DDC pump and reservoir unit to simplify tubing runs.
- You plan to install radiators that measure 30mm thick or less.
Skip if
- You use a PC case other than the Lian Li Ghost Axe.
- You plan to install liquid cooling radiators thicker than 30mm.
Verdict: Bykski Ghost Axe Distro Plate with DDC Pump provides a case-specific reservoir and pump combination that simplifies loop routing in the Lian Li Ghost Axe. It delivers integrated 5V addressable lighting and tidy parallel tubing lines, provided your radiators stay within the 30mm thickness limit.
Bykski Corsair 680X Distro Plate with DDC Pump
Best for: Corsair 680X custom loop liquid cooling builds
- Lighting Type
- 5v Addressable RGB (RBW)
- Pump Compatibility
- DDC
- Dimensions
- 15.7 × 6.89 × 1.32 inches
- Weight
- 10 pounds
View on Amazon: Bykski Corsair 680X Distro Plate with DDC Pump
This distribution plate is a PMMA acrylic reservoir unit built specifically for your Corsair 680X chassis. It includes an integrated DDC pump with armor heatsink and a 5V addressable RGB lighting strip to simplify loop routing. It supports radiators up to 30mm thick and weighs 10 pounds. This setup suits you if you want clean, direct tubing runs inside this specific case without mounting separate pump units.
Pros
- Includes an integrated DDC pump with heatsink armor
- Equipped with a 5V addressable RGB LED strip
- Pre-assembled clear PMMA acrylic construction
- Engineered specifically for the Corsair 680X chassis
Cons
- Not compatible with PC cases other than the Corsair 680X
- Limits radiator thickness to a maximum of 30mm
- Heavy dry weight of 10 pounds
Good fit if
- You build a custom liquid cooling loop inside a Corsair 680X chassis.
- You want an all-in-one reservoir and DDC pump combo plate.
- You plan to use radiators that do not exceed 30mm in thickness.
Skip if
- You use any computer chassis other than the Corsair 680X.
- You require radiators thicker than 30mm in your cooling loop.
Verdict: Bykski Corsair 680X Distro Plate with DDC Pump provides a dedicated custom loop reservoir and pump solution tailored specifically for the Corsair 680X. It streamlines tubing runs if your radiators stay within the 30mm thickness limit.
Bykski RTX 3080 Founders Edition GPU Water Block
Best for: RTX 3080 Founders Edition custom loops
- Dimensions
- 11.8 × 7.11 × 2.05 inches
- Weight
- 5.1 pounds
View on Amazon: Bykski RTX 3080 Founders Edition GPU Water Block
This full-coverage water block and included backplate cool your RTX 3080 Founders Edition graphics card inside a custom liquid loop. It measures 11.83 by 7.11 by 2.05 inches and weighs 5.1 pounds. The unit fits standard G1/4 thread fittings and offers SLI or Crossfire compliance. You get dedicated full-board liquid cooling if you build a custom loop around this specific reference GPU.
Pros
- Fits standard G1/4 thread fittings
- Includes matching backplate
- SLI and Crossfire compliant design
- Full coverage cooling for RTX 3080 Founders Edition
Cons
- Weighs 5.1 pounds
- Limited strictly to RTX 3080 Founders Edition layout
Good fit if
- You own an RTX 3080 Founders Edition graphics card.
- You use standard G1/4 threaded fittings in your loop.
- You want an included backplate with your GPU block.
Skip if
- You run a non-Founders Edition or third-party RTX 3080 card.
- You need a lightweight cooling solution under 5 pounds.
Verdict: Bykski RTX 3080 Founders Edition GPU Water Block delivers full-board liquid cooling and standard G1/4 port compatibility for reference builds. Its 5.1-pound assembly includes a backplate to support multi-GPU SLI configurations.
Bykski 200mm DDC Reservoir Combo with ARGB
Best for: custom DDC loops needing integrated addressable lighting
- Lighting
- ARGB
- Pump Compatibility
- DDC
- Dimensions
- 10 × 2.76 × 2.76 inches
- Weight
- 3 pounds
This Bykski unit combines a 200mm PMMA reservoir with a DDC pump housing for custom liquid cooling systems. It features integrated 5v addressable RGB lighting and an external black aluminum armor construction designed to keep the metal isolated from your coolant. Measuring roughly 10 inches long and weighing three pounds, this combo suits your build if you want dedicated fluid capacity and clean lighting without mixing metals inside your cooling loop.
Pros
- Integrated 5v A-RGB (RBW) LED lighting
- External aluminum armor isolated from coolant contact
- 200mm PMMA reservoir tube length
- Compatible with standard DDC pumps
Cons
- Requires over 10 inches of clearance inside the case
- Pump unit itself is not listed as included
- Weighs 3 pounds without liquid
Good fit if
- You need a 200mm PMMA reservoir with integrated 5v addressable RGB lighting.
- You already have or plan to install a separate DDC pump.
- You have more than 10.04 inches of vertical clearance in your case.
Skip if
- You do not have 10.04 inches of vertical space for mounting.
- You want an all-in-one package with the pump already installed.
- You only have 12v RGB motherboard headers instead of 5v A-RGB.
Verdict: Bykski 200mm DDC Reservoir Combo with ARGB delivers integrated 5v lighting and an isolated aluminum housing for custom cooling setups. It provides standard DDC pump mounting and 200mm of fluid capacity if your chassis has the vertical clearance.
Bykski Zotac RTX 3080 GPU Water Block
Best for: Zotac RTX 3080 Apocalypse custom loops
- Dimensions
- 11.8 × 7.11 × 2.05 inches
- Weight
- 5 pounds
This full-coverage GPU water block cools a Zotac RTX 3080 Apocalypse OC graphics card within your custom loop. It measures 11.83 inches long, 7.11 inches wide, and 2.05 inches tall while weighing 5 pounds. It supports standard G1/4 thread fittings and offers SLI and Crossfire compliance. If you build multi-GPU setups or want direct liquid cooling tailored specifically to this graphics card layout, this component fits your loop.
Pros
- Uses standard G1/4 thread fittings
- SLI and Crossfire compliant design
- Full-coverage cooling for Zotac RTX 3080 Apocalypse OC
Cons
- Heavy unit weighing 5 pounds
- Limited strictly to Zotac RTX 3080 Apocalypse OC PCB layout
Good fit if
- You run a Zotac RTX 3080 Apocalypse OC graphics card.
- You use standard G1/4 threaded fittings in your custom loop.
- You plan an SLI or Crossfire multi-GPU configuration.
Skip if
- You own a reference or Founders Edition graphics card.
- You require a lightweight cooling block under 5 pounds.
Verdict: Bykski Zotac RTX 3080 GPU Water Block provides dedicated full-coverage cooling with G1/4 port compatibility for compatible Zotac graphics cards. It serves multi-GPU configurations with SLI and Crossfire support.
Bykski O11 Mini Distro Plate with 5V RGB
Best for: Lian Li PC-O11 Mini custom loops
- Lighting Type
- 5v Addressable RGB (RBW)
- Pump Compatibility
- DDC
- Dimensions
- 2.44 × 2.44 × 2.28 inches
- Weight
- 5 pounds
This distribution plate is built from clear PMMA acrylic specifically for the Lian Li PC-O11 Mini chassis using Mini-ITX or Micro-ATX motherboards. It includes an integrated DDC pump with an armor heatsink and a built-in 5-volt addressable RGB LED strip. It routes your liquid lines for parallel tubing runs. If you need a tailored reservoir and pump setup inside an O11 Mini build without exceeding 30mm radiator thickness, this fits your loop.
Pros
- Custom fit for Lian Li PC-O11 Mini chassis
- Includes DDC pump with armor heatsink
- Integrated 5V addressable RGB LED strip
- Full transparent PMMA acrylic construction
Cons
- Restricted to radiators 30mm thick or less
- Incompatible with cases other than the PC-O11 Mini
Good fit if
- You build inside a Lian Li PC-O11 Mini chassis.
- You use a Micro-ATX or Mini-ITX motherboard.
- You want an integrated DDC pump and distro plate unit.
Skip if
- You use a PC case other than the Lian Li PC-O11 Mini.
- You plan to install radiators thicker than 30mm.
Verdict: Bykski O11 Mini Distro Plate with DDC Pump provides a case-specific reservoir and pump combination for Lian Li PC-O11 Mini systems. It streamlines loop routing as long as your radiator thickness remains at or below 30mm.
Specifications side by side
| Spec | Bykski O11 Dynamic XL Distro Plate with DDC Pump | Bykski InWin 925 Distro Plate with DDC Pump | Bykski Phanteks Evolv Shift X Distro Plate | Bykski Cougar Blazer Distro Plate with DDC Pump | Bykski Aluminum M.2 SSD Heatsink Armor | Bykski Sapphire RX 5700 XT Nitro+ GPU Water Block | Bykski Lian Li O11 Distro Plate with RGB | Bykski TT Level 20 XT Distro Plate with RGB | Bykski Intel CPU Water Block | Bykski Lian Li Ghost Axe Distro Plate with DDC Pump | Bykski Corsair 680X Distro Plate with DDC Pump | Bykski RTX 3080 Founders Edition GPU Water Block | Bykski 200mm DDC Reservoir Combo with ARGB | Bykski Zotac RTX 3080 GPU Water Block | Bykski O11 Mini Distro Plate with 5V RGB |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Socket Compatibility | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | Intel LGA 1200/1700 - 115x - 2011/2066 | not specified | not specified | not specified | not specified | not specified | not specified |
| Lighting Type | Addressable RGB | Addressable RGB | Addressable RGB | not specified | not specified | not specified | A-RGB (RBW) | A-RGB (RBW) | not specified | 5v Addressable RGB (RBW) | 5v Addressable RGB (RBW) | not specified | not specified | not specified | 5v Addressable RGB (RBW) |
| Lighting | RGB | RGB | RGB | RGB | not specified | not specified | RGB | RGB | not specified | RGB | RGB | not specified | ARGB | not specified | RGB |
| Pump Compatibility | DDC | DDC | DDC | DDC | not specified | not specified | DDC | DDC | not specified | DDC | DDC | not specified | DDC | not specified | DDC |
| Dimensions | 16.7 × 5.67 × 1.32 inches | 14.9 × 5.24 × 1.32 inches | 12 × 6.1 × 1.24 inches | 14.2 × 4.13 × 1.32 inches | 0.17 × 0.12 × 0.06 inches | 11.8 × 7.11 × 2.05 inches | 13.5 × 5.22 × 1.32 inches | 13.8 × 7.93 × 1.32 inches | 7 × 12 × 4 inches | 11.6 × 4.96 × 1.32 inches | 15.7 × 6.89 × 1.32 inches | 11.8 × 7.11 × 2.05 inches | 10 × 2.76 × 2.76 inches | 11.8 × 7.11 × 2.05 inches | 2.44 × 2.44 × 2.28 inches |
| Weight | 10 pounds | 10 pounds | 10 pounds | 10 pounds | 1 pounds | 5 pounds | 10 pounds | 10 pounds | 1.5 pounds | 10 pounds | 10 pounds | 5.1 pounds | 3 pounds | 5 pounds | 5 pounds |
| Size | DDC Pump With Armor | DDC Pump With Armor | DDC Pump With Armor | DDC Pump With Armor | not specified | not specified | DDC Pump With Armor | DDC Pump With Armor | not specified | DDC Pump With Armor | DDC Pump With Armor | not specified | 200mm | not specified | DDC Pump With Armor |
| Color | not specified | not specified | Transparent | not specified | Black | not specified | Frosted | Transparent | Black | not specified | not specified | Black | Black | not specified | Transparent |
Bykski Liquid Cooling Lineup Overview
Chassis-matched distro plates form the largest group across the 15 options. Models like the Bykski O11 Dynamic XL Distro Plate with DDC Pump feature PMMA construction, integrated RGB lighting, and dedicated DDC pump mounts. If you own one of the supported enclosures, these plates suit you by combining fluid routing and pumping into one fixed unit.
Component blocks and standalone reservoirs serve you if you target individual hardware. The Bykski Intel CPU Water Block uses nickel-plated copper with 0.2mm micro-channels, whereas the Bykski RTX 3080 Founders Edition GPU Water Block provides card-specific cooling via standard G1/4 ports. For custom layouts, the Bykski 200mm DDC Reservoir Combo with ARGB supplies standalone capacity.
Who the Bykski Range Suits
You find custom loop hardware spanning compact 0.17-inch passive M.2 heatsinks up to 16.68-inch distro plates. Shapes include flat acrylic distribution panels, water blocks for Intel processors and specific graphics cards, and a cylindrical 200mm reservoir. Lighting options cover standard RGB, 5V addressable RGB, and unlit metal components.
Note the catalog gaps before planning your setup. The selection provides individual loop parts rather than all-in-one pre-assembled coolers. Pump mounts support only DDC footprints, leaving out D5 units. Chassis plates limit radiators to 30mm thickness, and processor cooling contains no AMD hardware.
How to Choose Bykski Cooling Hardware
-
Verify Radiator Thickness Clearances
Check your radiator depth before you select a chassis-matched distro plate. Several Bykski panels require radiators that measure 30mm thick or less. For example, the Bykski Corsair 680X Distro Plate with DDC Pump specifies a strict 30mm limit to keep tubing ports aligned. If you install radiators thicker than 30mm, your ports shift out of square with the pre-routed channels. Measure the core and fan thickness together to guarantee the assembly fits your chassis frame without blocking the designated inlet and outlet ports.
-
Match Exact GPU Circuit Boards
Match your graphics card water block strictly to your exact board layout. Full-coverage blocks fit only specific component placements on the printed circuit board. For instance, the Bykski RTX 3080 Founders Edition GPU Water Block fits standard reference designs and does not align with custom partner layouts. Compare the board model name, revision, and power connector placement against the water block spec sheet. Buying a block made for a different PCB layout prevents proper thermal pad contact across the VRM and memory modules.
-
Check DDC Pump Mounting Support
Inspect the pump mounting specification before you plan loop flow. Bykski distro plates and combo units in this collection use DDC form factor pump integration. Products like the Bykski 200mm DDC Reservoir Combo with ARGB include mounting hardware built for DDC units rather than larger D5 bodies. DDC pumps offer a compact footprint and high head pressure, making them suitable for multi-block loops with tight runs. Confirm whether the unit includes the pump motor or solely provides the pump armor and mounting bracket.
-
Check Lighting Voltage Requirements
Verify the lighting header specifications on your motherboard before connecting illumination cables. Bykski distribution plates and water blocks use either standard RGB or 5V addressable RGB systems. For example, the Bykski Phanteks Evolv Shift X Distro Plate utilizes 5V addressable RGB connections. Plugging a 5V addressable connector into a standard 12V non-addressable RGB motherboard header causes electrical damage to the LEDs. Review your motherboard manual to ensure you have the required 3-pin 5V header or obtain an external hardware controller to manage lighting profiles safely.
-
Standardize G1/4 Port Fittings
Verify fitting thread compatibility across all loop components to avoid leaks and mismatched connections. Custom loop water blocks use industry-standard G1/4 female threads. The Bykski Sapphire RX 5700 XT Nitro+ GPU Water Block incorporates standard G1/4 ports for broad adapter support. Check that your compression fittings, barb fittings, or rotary angled adapters match the G1/4 thread pitch. Using incorrect thread sizing or forcing non-standard adapters will strip the acrylic threads, damage the integrated O-rings, and compromise the liquid seal inside your custom cooling loop.
-
Evaluate Cold Plate Micro-Channels
Examine the internal cold plate fin spacing to balance thermal transfer and flow restriction. The Bykski Intel CPU Water Block features 0.2mm micro-channels cut into nickel-plated copper. Finer micro-channels increase the surface area available to absorb heat from the processor IHS. However, dense channel arrays introduce more hydraulic resistance to the loop. If you run multiple blocks and radiators together, pair dense micro-channel water blocks with a reliable DDC pump to maintain adequate flow rates across every component in the cooling circuit.
Frequently asked questions
Are Bykski distro plates standalone AIO coolers?
No, Bykski distro plates are not closed-loop all-in-one units. You integrate them into custom liquid cooling loops as dedicated routing manifolds and reservoir hubs. Models like the Bykski O11 Dynamic XL and Cougar Blazer distro plates include DDC pump mounts or integrated pumps. You still need to add your own tubing, fittings, radiators, and water blocks to complete the cooling loop.
Which pump standard do Bykski distro plates and reservoir combos use?
Bykski distro plates and reservoir units specify DDC pump compatibility. Distribution plates for cases like the InWin 925, Lian Li O11, and Corsair 680X feature dedicated DDC pump mounting configurations with armor. The Bykski 200mm reservoir combo also utilizes this standard, pairing a DDC mounting bracket with an isolated aluminum housing and a cylindrical transparent body for your fluid.
What thread standard do Bykski GPU water blocks use for fittings?
Bykski GPU water blocks use industry-standard G1/4 thread ports. Blocks such as the Bykski RTX 3080 Founders Edition and Bykski Sapphire RX 5700 XT Nitro+ rely on these standard threaded connections. This port standard allows you to connect standard custom liquid cooling fittings, adapters, and tubing lines directly into the water block without requiring proprietary threaded accessories.
What internal structure does the Bykski Intel CPU Water Block have?
The Bykski Intel CPU Water Block features nickel-plated copper construction fitted with 0.2mm micro-channels. These internal micro-channels increase the surface area in contact with the coolant to transfer heat away from the processor. Bykski packages this unit as a complete assembly, supplying the CPU block alongside mounting hardware and a tube of thermal paste for your custom Intel build.
Can you run Bykski GPU blocks in multi-card setups?
Yes, select Bykski graphics card water blocks explicitly support multi-GPU setups. The Bykski RTX 3080 Founders Edition water block includes a backplate designed to accommodate SLI configurations. Similarly, the Bykski Zotac RTX 3080 GPU water block supports both SLI and Crossfire configurations. Both units feature standard G1/4 ports that let you route fluid links between multiple installed cards.
Does the Bykski M.2 SSD heatsink connect to liquid coolant lines?
No, the Bykski Aluminum M.2 SSD Heatsink Armor is a purely passive cooling solution. You do not route liquid cooling tubes, fittings, or fluid to this component. It uses an anodized black aluminum body measuring 0.118 inches wide and 0.167 inches long to dissipate drive heat directly into the ambient case air without integrating into your custom loop.
What lighting options come on Bykski cooling components?
Bykski components feature several lighting specifications depending on the product. Distro plates like the Phanteks Evolv Shift X, Cougar Blazer, and TT Level 20 XT utilize 5V addressable RGB lighting. The 200mm DDC Reservoir Combo specifies ARGB lighting, while the Sapphire RX 5700 XT Nitro+ GPU block includes RBW illumination. Other components, such as the Intel block and M.2 heatsink, have no illumination.