15 Best Bykski Water Cooling Parts for DDC, Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Finding the best bykski water cooling parts for DDC requires matching specific case dimensions with compatible distribution plates. This guide compares 15 models based strictly on their published specifications. The top pick is the Bykski O11 Dynamic XL Distro Plate with DDC Pump. It leads because its 16.7-inch length standardizes tube runs for Lian Li O11 Dynamic XL custom loops. All selections rely on data like PMMA material, 5v Addressable RGB lighting, and 30mm radiator limits. Use these specs to decide which plate fits your chassis and pump setup.
Quick picks
The best fit for you
- You build in a Lian Li O11 Dynamic XL Bykski O11 Dynamic XL Distro Plate with DDC Pump It provides a dedicated layout for this full-tower case with a 16.7-inch length.
- You need the smallest footprint for a mini case Bykski O11 Mini Distro Plate with 5V RGB Its compact 2.44-inch square dimensions fit the Lian Li PC-O11 Mini chassis.
- You want standalone pumping without a distro plate Bykski Mini DDC Pump Reservoir Combo This 4.02-inch combo offers a compact alternative to chassis-specific distribution plates.
- You require substantial fluid capacity in a tube Bykski 200mm DDC Reservoir Combo with ARGB The 200mm PMMA tube provides 10.04 inches of length for large volume.
Our 15 picks
Bykski O11 Dynamic XL Distro Plate with DDC Pump
Best for: Lian Li O11 Dynamic XL custom loops
- Pump Compatibility
- DDC (what this guide is about)
- Lighting
- 5v Addressable RGB
- Material
- PMMA
- Dimensions
- 16.7 × 5.67 × 1.32 inches
- Weight
- 10 pounds
View on Amazon: Bykski O11 Dynamic XL Distro Plate with DDC Pump Affiliate link
This distribution plate is made from clear PMMA acrylic and fits specifically inside the Lian Li O11 Dynamic XL case. It integrates DDC pump compatibility with an included armored pump setup and a 5V addressable RGB LED strip. The plate routes your liquid cooling lines while keeping radiator thickness limited to 30mm or less. It suits you if you want a pre-assembled manifold designed strictly for this chassis.
Pros
- Full PMMA acrylic body with integrated 5V addressable RGB lighting
- Configured with an armored DDC pump heatsink
- Pre-assembled construction includes mounting hardware
- Designed for direct fit in Lian Li O11 Dynamic XL chassis
Cons
- Restricted specifically to the Lian Li O11 Dynamic XL case
- Limits installed radiator thickness to 30mm maximum
- Heavy dry weight at 10 pounds
Good fit if
- You build a custom liquid loop inside a Lian Li O11 Dynamic XL case.
- You want an integrated manifold that includes an armored DDC pump.
- You plan to use cooling radiators that measure 30mm or less in thickness.
Skip if
- You own any computer case other than the Lian Li O11 Dynamic XL.
- You plan to run radiators thicker than 30mm in your cooling loop.
Verdict: Bykski Lian Li O11 Dynamic XL DDC Distro Plate provides a dedicated PMMA reservoir manifold and armored DDC pump tailored specifically for this full-tower case. Its rigid layout standardizes your tube runs while capping radiator thickness at 30mm.
Bykski InWin 925 Distro Plate with DDC Pump
Best for: InWin 925 custom liquid cooling loops
- Pump Compatibility
- DDC (what this guide is about)
- Lighting
- 5v Addressable RGB
- Material
- PMMA
- Dimensions
- 14.9 × 5.24 × 1.32 inches
- Weight
- 10 pounds
View on Amazon: Bykski InWin 925 Distro Plate with DDC Pump Affiliate link
This Bykski distro plate is made from PMMA acrylic specifically for the InWin 925 chassis. It features an integrated 5V addressable RGB LED strip and comes configured with an armored DDC pump. It measures 14.88 by 5.24 inches and requires radiators no thicker than 30mm. You will find it suits your build if you want dedicated fluid routing inside an InWin 925 case.
Pros
- Includes pre-installed DDC pump with heatsink armor
- Built-in 5V addressable RGB lighting strip
- Clear PMMA acrylic construction with included mounting hardware
- Tailored specifically for the InWin 925 case
Cons
- Limited to radiators 30mm thick or less
- Only compatible with the InWin 925 chassis
- Weighs 10 pounds assembled
Good fit if
- You build a custom loop inside an InWin 925 chassis.
- You want an armored DDC pump bundled directly with your distribution plate.
- You plan to use radiators that are 30mm thick or slimmer.
Skip if
- You use any computer case other than the InWin 925.
- You require radiators thicker than 30mm for your cooling loop.
Verdict: Bykski InWin 925 Distro Plate with DDC Pump provides a case-specific PMMA reservoir and integrated DDC pump unit for InWin 925 builds. Its internal layout cleanly manages parallel tube runs as long as your radiators do not exceed 30mm.
Bykski Phanteks Evolv Shift X Distro Plate
Best for: Phanteks Evolv Shift X custom DDC loops
- Pump Compatibility
- DDC (what this guide is about)
- Lighting
- 5v Addressable RGB
- Material
- PMMA
- Dimensions
- 12 × 6.1 × 1.24 inches
- Weight
- 10 pounds
View on Amazon: Bykski Phanteks Evolv Shift X Distro Plate Affiliate link
This Bykski distro plate is a dedicated PMMA liquid cooling reservoir designed specifically for the Phanteks Evolv Shift X case. It features built-in 5V addressable RGB lighting and mounts an inline DDC pump directly to the acrylic block. You get routed cooling channels tailored to this specific chassis, supporting radiators up to 30mm thick. It suits you if you want an organized custom loop layout in this chassis.
Pros
- Clear PMMA acrylic construction with integrated flow channels
- Built-in 5V addressable RGB LED lighting strip
- Direct mounting support for inline DDC pumps
- Pre-assembled plate includes necessary mounting hardware
Cons
- Strictly limited to the Phanteks Evolv Shift X chassis
- Restricts installed radiator thickness to 30mm maximum
Good fit if
- You build a custom liquid cooling loop inside a Phanteks Evolv Shift X case.
- You plan to mount an inline DDC pump directly to the distro plate.
- You use radiators that do not exceed 30mm in thickness.
Skip if
- You use any PC case other than the Phanteks Evolv Shift X.
- You plan to run radiators thicker than 30mm in your loop.
Verdict: Bykski Phanteks Evolv Shift X DDC Distro Plate provides a tailored acrylic reservoir and routing layout with integrated 5V RGB and DDC pump compatibility. It organizes your tubing runs effectively if you build inside this specific Phanteks chassis with slim radiators.
Bykski Cougar Blazer Distro Plate with DDC Pump
Best for: Cougar Blazer loops requiring DDC pump integration
- Pump Compatibility
- DDC (what this guide is about)
- Lighting
- 5v Addressable RGB
- Material
- Acrylic (PMMA)
- Dimensions
- 14.2 × 4.13 × 1.32 inches
- Weight
- 10 pounds
View on Amazon: Bykski Cougar Blazer Distro Plate with DDC Pump Affiliate link
This Bykski distribution plate is built specifically for the Cougar Blazer chassis. It features clear PMMA acrylic construction, integrated 5V addressable RGB lighting, and an included DDC pump with armor heatsink. You get pre-assembled mounting hardware designed for inline pump operation. If you run a Cougar Blazer case with radiators 30mm thick or less, this distro plate organizes your loop tubing runs.
Pros
- Includes DDC pump with armor heatsink
- Built-in 5V addressable RGB lighting strip
- Full PMMA acrylic body with supplied mounting hardware
- Engineered directly for the Cougar Blazer chassis layout
Cons
- Limits installed radiator thickness to 30mm maximum
- Incompatible with PC cases other than the Cougar Blazer
Good fit if
- You build a custom liquid cooling loop inside a Cougar Blazer chassis.
- You want an integrated DDC pump unit with armor cooling.
- You use radiators that are 30mm thick or thinner.
Skip if
- You use any computer case other than the Cougar Blazer.
- You plan to install radiators thicker than 30mm.
Verdict: Bykski Cougar Blazer PMMA Distro Plate with DDC Pump provides dedicated routing and reservoir capacity for Cougar Blazer builds. It fits inline DDC pumping directly into the chassis while remaining restricted to slim radiators.
Bykski DDC Pump Top Black Armor
Best for: Compact DDC builds needing durable pump reservoir
- Pump Compatibility
- DDC (what this guide is about)
- Material
- Aluminum
- Dimensions
- 4.33 × 4.33 × 4.33 inches
- Weight
- 2 pounds
View on Amazon: Bykski DDC Pump Top Black Armor Affiliate link
This Bykski unit combines a DDC pump with a 200mm PMMA reservoir and a protective aluminum armor shell. The assembly measures 4.33 inches on each side and weighs 2 pounds. It is designed for users who want a durable, ready-to-install pump solution with a black finish. The armor protects the reservoir without contacting the coolant. It suits builders looking for a compact, sturdy pump combo for their custom loop.
Pros
- DDC pump compatibility for reliable flow
- Aluminum armor construction for durability
- 200mm PMMA reservoir for good fluid visibility
- Compact 4.33-inch cubic footprint
- Black finish for clean aesthetics
Cons
- 2-pound weight adds mass to the build
- Armor does not contact coolant, limiting direct cooling
- No mention of addressable RGB lighting features
Good fit if
- You need a DDC pump ready for immediate installation
- You prefer a durable aluminum exterior for your reservoir
- You are building a compact loop with limited space
Skip if
- You require integrated RGB lighting for your pump
- You are looking for a lighter weight component
- You prefer a reservoir without an external armor shell
Verdict: Bykski DDC Pump Armor Reservoir Combo offers a sturdy, compact solution for DDC users. It fits builders who value durability and a clean black look over flashy lighting effects.
Bykski Lian Li O11 Distro Plate with RGB
Best for: Lian Li O11 dual-radiator DDC loops
- Pump Compatibility
- DDC (what this guide is about)
- Lighting
- 5v Addressable RGB
- Material
- Acrylic (PMMA)
- Dimensions
- 13.5 × 5.22 × 1.32 inches
- Weight
- 10 pounds
View on Amazon: Bykski Lian Li O11 Distro Plate with RGB Affiliate link
This distribution plate uses PMMA acrylic construction and mounts directly into a Lian Li O11 case. It supports DDC pump configurations and includes an integrated 5v addressable RGB LED strip. The layout accommodates dual 360mm radiators, provided their thickness does not exceed 30mm. You get mounting hardware in the box. It suits you if you want an organized loop inside an O11 chassis.
Pros
- Supports dual 360mm radiators up to 30mm thick
- Integrated 5v addressable RGB LED strip
- Compatible with DDC pumps and heatsink armor
- Pre-assembled PMMA acrylic construction
Cons
- Radiator thickness cannot exceed 30mm
- Not recommended for cases other than Lian Li O11
- Ten-pound listed unit weight
Good fit if
- You build a custom liquid loop inside a Lian Li O11 case.
- You plan to install up to two 360mm radiators under 30mm thick.
- You want integrated 5v addressable RGB lighting for your distro plate.
Skip if
- You use a PC chassis other than the Lian Li O11.
- You intend to use radiators thicker than 30mm.
Verdict: Bykski Lian Li O11 DDC Distro Plate provides a dedicated liquid routing solution for standard O11 chassis with dual 360mm radiator support. Its DDC pump compatibility and integrated 5v addressable RGB lighting keep your loop clean and organized.
Bykski TT Level 20 XT Distro Plate with RGB
Best for: Thermaltake Level 20 XT DDC cooling loops
- Pump Compatibility
- DDC (what this guide is about)
- Lighting
- 5v Addressable RGB
- Material
- Acrylic (PMMA)
- Dimensions
- 13.8 × 7.93 × 1.32 inches
- Weight
- 10 pounds
View on Amazon: Bykski TT Level 20 XT Distro Plate with RGB Affiliate link
This transparent PMMA distribution plate fits the Thermaltake Level 20 XT case and supports an integrated DDC pump with armor. It includes a 5V addressable RGB LED strip and dedicated mounting hardware to route your loop cleanly without excessive tubing. You need to keep installed radiator thickness to 30mm or less. It suits you if you build a custom liquid loop inside this specific Thermaltake chassis.
Pros
- Designed specifically for the Thermaltake Level 20 XT chassis
- Integrates direct mounting for a DDC pump with armor heatsink
- Includes a 5V addressable RGB lighting strip and mounting hardware
- Transparent PMMA acrylic construction
Cons
- Incompatible with cases other than the TT Level 20 XT
- Limits installed radiator thickness to 30mm
- Weighs 10 pounds
Good fit if
- You build inside a Thermaltake Level 20 XT case.
- You run a DDC pump setup with 5V A-RGB lighting.
- You use radiators that do not exceed 30mm in thickness.
Skip if
- You use a chassis other than the Thermaltake Level 20 XT.
- You plan to mount radiators thicker than 30mm.
Verdict: Bykski TT Level 20 XT PMMA DDC Distro Plate delivers organized loop routing and DDC pump mounting tailored exclusively for the Level 20 XT chassis. It keeps tubing runs direct as long as your radiators stay within the 30mm limit.
Bykski Lian Li Ghost Axe Distro Plate with DDC Pump
Best for: Lian Li Ghost Axe DDC cooling loops
- Pump Compatibility
- DDC (what this guide is about)
- Lighting
- 5v Addressable RGB (RBW)
- Material
- PMMA (Acrylic)
- Dimensions
- 11.6 × 4.96 × 1.32 inches
- Weight
- 10 pounds
View on Amazon: Bykski Lian Li Ghost Axe Distro Plate with DDC Pump Affiliate link
This Bykski distribution plate is a PMMA acrylic reservoir unit built specifically for the Lian Li Ghost Axe chassis. It comes integrated with a DDC pump featuring an armor heatsink and includes a 5v addressable RGB LED strip. The plate supports custom loop routing while limiting connected radiators to a 30mm thickness. You will find it ideal if you need a direct-fit pump-and-reservoir combo for your Ghost Axe case.
Pros
- Includes DDC pump with armor heatsink
- Built-in 5v addressable RGB LED strip
- Full PMMA acrylic build with included mounting hardware
- Pre-assembled for direct installation
Cons
- Compatible only with the Lian Li Ghost Axe chassis
- Limits installed radiator thickness to 30mm
Good fit if
- You build a custom liquid cooling loop inside a Lian Li Ghost Axe case.
- You need an integrated PMMA distro plate with an armored DDC pump and 5v A-RGB lighting.
- You plan to use radiators measuring 30mm or thinner.
Skip if
- You use any computer chassis other than the Lian Li Ghost Axe.
- You require radiators thicker than 30mm in your cooling loop.
Verdict: Bykski Lian Li Ghost Axe DDC Distro Plate provides an integrated armored DDC pump and 5v addressable RGB lighting tailored strictly to the Ghost Axe chassis. It streamlines your tube routing provided your radiators do not exceed 30mm in thickness.
Bykski Corsair 680X Distro Plate with DDC Pump
Best for: Corsair 680X custom liquid cooling loops
- Pump Compatibility
- DDC (what this guide is about)
- Lighting
- 5v Addressable RGB (RBW)
- Material
- PMMA (Acrylic)
- Dimensions
- 15.7 × 6.89 × 1.32 inches
- Weight
- 10 pounds
View on Amazon: Bykski Corsair 680X Distro Plate with DDC Pump Affiliate link
This PMMA acrylic distribution plate integrates a DDC pump with an armor heatsink specifically for the Corsair 680X chassis. It includes built-in 5V addressable RGB lighting and measures 15.75 by 6.89 by 1.32 inches. It limits installed radiator thickness to 30mm. You get a pre-assembled layout engine designed to replace separate reservoirs and simplify custom loop tubing runs directly inside a compatible Corsair 680X enclosure.
Pros
- Integrated DDC pump with armored heatsink
- Built-in 5V addressable RGB LED strip
- Pre-assembled PMMA acrylic construction with included mounting hardware
- Tailored fitting alignment for Corsair 680X chassis
Cons
- Restricted strictly to Corsair 680X chassis mounting
- Limits connected radiator thickness to 30mm
- Weighs 10 pounds without coolant
Good fit if
- You build a custom liquid loop inside a Corsair 680X case.
- You want an integrated DDC pump and armored heatsink included.
- You use radiators that do not exceed 30mm thickness.
Skip if
- You use any PC chassis other than the Corsair 680X.
- You plan to mount radiators thicker than 30mm.
Verdict: Bykski Corsair 680X Distro Plate with DDC Pump provides a case-dedicated PMMA distribution layout with integrated armored pumping for organized loop routing. Its 30mm radiator cap and dedicated footprint require strict pairing with Corsair 680X enclosures.
Bykski 200mm DDC Reservoir Combo with ARGB
Best for: custom DDC loops needing integrated 5V ARGB
- Pump Compatibility
- DDC (what this guide is about)
- Lighting
- 5v A-RGB
- Material
- PMMA, Aluminum
- Reservoir Capacity
- 200mm PMMA
- Dimensions
- 10 × 2.76 × 2.76 inches
- Weight
- 3 pounds
View on Amazon: Bykski 200mm DDC Reservoir Combo with ARGB Affiliate link
If you run a custom liquid cooling setup with a DDC pump, the Bykski 200mm DDC Reservoir Combo with ARGB gives you an integrated unit with a 200mm PMMA reservoir and built-in 5V addressable RGB lighting. It measures 10.04 inches long, 2.76 inches wide, and 2.76 inches high, weighing 3 pounds. The exterior features black aluminum armor isolated from direct coolant contact, making it suitable for builders seeking high-capacity DDC storage with lighting.
Pros
- Integrated 5V addressable RGB LEDs
- 200mm PMMA reservoir column
- Aluminum armor construction isolated from coolant contact
- Direct DDC pump compatibility
Cons
- 10.04-inch total length requires significant vertical clearance
- Weighs 3 pounds empty
Good fit if
- You need a 200mm reservoir designed for DDC pumps.
- You want integrated 5V addressable RGB lighting in your loop.
- You have over 10.04 inches of vertical clearance in your case.
Skip if
- You build inside a compact chassis that cannot fit a 10.04-inch combo.
- You plan to use a D5 pump instead of a DDC unit.
Verdict: Bykski 200mm DDC Reservoir Combo with ARGB combines a 200mm PMMA tube with protective aluminum armor and integrated 5V lighting for DDC loops. Its 10.04-inch length provides substantial fluid capacity if your chassis has the clearance.
Bykski O11 Mini Distro Plate with 5V RGB
Best for: Lian Li PC-O11 Mini DDC loops
- Pump Compatibility
- DDC (what this guide is about)
- Socket Compatibility
- Lian Li PC-O11 MINI
- Lighting
- 5v Addressable RGB
- Material
- Acrylic (PMMA)
- Dimensions
- 2.44 × 2.44 × 2.28 inches
- Weight
- 5 pounds
View on Amazon: Bykski O11 Mini Distro Plate with 5V RGB Affiliate link
This Bykski distribution plate is designed specifically for the Lian Li PC-O11 Mini chassis housing Micro-ATX or Mini-ITX motherboards. Built from transparent PMMA acrylic with integrated 5V addressable RGB lighting, it supports an inline DDC pump setup with armor heatsink. You must pair it with radiators up to 30mm thick. It suits custom loop builders who want streamlined tubing runs and integrated reservoir routing inside a compact O11 Mini case.
Pros
- Dedicated fit for Lian Li PC-O11 Mini with Micro-ATX motherboards
- PMMA clear acrylic body with integrated 5V addressable RGB LED strip
- Supports DDC pump with armor heatsink installation
- Includes mounting hardware and pre-assembled distro unit
Cons
- Radiator thickness cannot exceed 30mm
- Not recommended for cases other than the Lian Li PC-O11 Mini
Good fit if
- You are building a custom cooling loop inside a Lian Li PC-O11 Mini case.
- You plan to use an inline DDC pump with an armor heatsink.
- You use radiators that are 30mm thick or slimmer.
Skip if
- You use a computer case other than the Lian Li PC-O11 Mini.
- You need to install radiators thicker than 30mm.
Verdict: Bykski Lian Li PC-O11 Mini DDC Distro Plate delivers dedicated liquid routing and integrated 5V A-RGB lighting for compact O11 Mini builds. It provides direct DDC pump mounting provided your radiators do not exceed 30mm in thickness.
Bykski TT Core P3 Distro Plate with DDC Pump
Best for: Thermaltake Core P3 custom loop builds
- Pump Compatibility
- DDC (what this guide is about)
- Lighting
- 5v Addressable RGB
- Material
- Acrylic (PMMA)
- Dimensions
- 16.5 × 4.74 × 1.32 inches
- Weight
- 10 pounds
View on Amazon: Bykski TT Core P3 Distro Plate with DDC Pump Affiliate link
This distribution plate gives you a custom reservoir and DDC pump combination engineered specifically for the Thermaltake Core P3 chassis. It integrates an inline DDC pump featuring an armor heatsink, transparent PMMA acrylic construction, and a 5V addressable RGB lighting strip. It limits radiator thickness to 30mm within the loop. If you run a Core P3 open-frame build and need clean, direct tubing runs with integrated DDC pumping, this unit fits your build.
Pros
- Integrated DDC pump includes an armor heatsink
- Direct mounting fit engineered for Thermaltake Core P3 cases
- Built-in 5V addressable RGB LED light strip
- Clear PMMA acrylic body simplifies parallel tubing alignment
Cons
- Restricted to loops using radiators 30mm thick or less
- Chassis-specific design is not recommended for other cases
- Overall assembly weighs 10 pounds
Good fit if
- You build inside a Thermaltake Core P3 chassis.
- You want a pre-installed DDC pump with an armor heatsink.
- You plan to use a radiator that is 30mm thick or slimmer.
Skip if
- You use a PC chassis other than the Thermaltake Core P3.
- You require a radiator thicker than 30mm.
Verdict: Bykski TT Core P3 Distro Plate with DDC Pump provides an exact-fit reservoir and pumping unit for Thermaltake Core P3 chassis builds. It combines an armored DDC pump with 5V A-RGB lighting while enforcing a 30mm radiator thickness ceiling.
Bykski Phanteks 719LTG Distro Plate with DDC Pump
Best for: Phanteks 719LTG owners needing DDC pump integration
- Pump Compatibility
- DDC (what this guide is about)
- Lighting
- 5v Addressable RGB
- Material
- Acrylic (PMMA)
- Dimensions
- 17.8 × 5.39 × 1.32 inches
- Weight
- 8 pounds
View on Amazon: Bykski Phanteks 719LTG Distro Plate with DDC Pump Affiliate link
This Bykski PMMA distribution plate fits the Phanteks 719LTG chassis and includes an integrated DDC pump with an armor heatsink. Measuring 17.76 by 5.39 by 1.32 inches and weighing 8 pounds, it organizes your cooling loop with parallel lines and built-in 5V addressable RGB lighting. You get direct hardware mounting for your loop centerpiece, making it ideal if you plan to install radiators up to 30mm thick in your Phanteks build.
Pros
- Includes DDC pump with armor heatsink
- Built-in 5V addressable RGB (RBW) LED strip
- Full acrylic PMMA construction pre-assembled with mounting hardware
- One-year warranty against manufacture defects
Cons
- Only compatible with the Phanteks 719LTG case
- Restricts installed radiator thickness to 30mm maximum
- Weighs 8 pounds without liquid
Good fit if
- You build inside a Phanteks 719LTG chassis.
- You want an integrated DDC pump equipped with an armor heatsink.
- You use radiators that do not exceed 30mm in thickness.
Skip if
- You use a PC chassis other than the Phanteks 719LTG.
- You plan to run radiators thicker than 30mm.
Verdict: Bykski Phanteks 719LTG Distro Plate with DDC Pump provides a case-specific reservoir and pump setup with 5V addressable lighting for clean loop layouts. It simplifies tubing runs as long as your radiators stay within the 30mm thickness limit.
Bykski Mini DDC Pump Reservoir Combo
Best for: compact loops needing standalone DDC pump mounting
- Pump Compatibility
- DDC (what this guide is about)
- Dimensions
- 4.02 × 2.44 × 2.44 inches
- Weight
- 2 pounds
View on Amazon: Bykski Mini DDC Pump Reservoir Combo Affiliate link
This Bykski unit combines a mini reservoir with a DDC pump setup and protective armor. Measuring roughly 2.44 by 2.44 by 4.02 inches, it fits smaller spaces where case-specific distribution plates cannot go. You get PWM speed control, all-black wiring, and standard 12-volt DC power that connects directly to your power supply. It suits you if you need a standalone DDC reservoir without dedicating an entire chassis panel to liquid routing.
Pros
- Compact footprint measuring 2.44 by 2.44 by 4.02 inches
- PWM-enabled pump speed control
- Plugs directly into standard 12V DC power supply leads
- All-black cables for uniform appearance
Cons
- No integrated RGB lighting listed in specifications
- Small fluid volume capacity due to compact 4.02-inch length
Good fit if
- You need a compact DDC pump reservoir combo for tight clearances.
- You want PWM control for dynamic pump speed adjustments.
- You prefer standard 12V DC power direct from the power supply.
Skip if
- You want a pre-routed distro plate tailored to a specific chassis.
- You require built-in addressable RGB lighting.
Verdict: Bykski Mini DDC Pump Reservoir Combo delivers PWM-controlled DDC compatibility in a compact 4.02-inch frame. It provides a standalone alternative to chassis-specific distribution plates.
Bykski Corsair 5000D Distro Plate with DDC Pump
Best for: Corsair 5000D builds using slim radiators
- Pump Compatibility
- DDC (what this guide is about)
- Lighting
- 5v Addressable RGB
- Material
- Acrylic (PMMA)
- Dimensions
- 13.9 × 4.84 × 1.2 inches
- Weight
- 10 pounds
View on Amazon: Bykski Corsair 5000D Distro Plate with DDC Pump Affiliate link
This Bykski distro plate provides a dedicated custom loop manifold built specifically for your Corsair 5000D chassis. Made from clear PMMA acrylic, it comes pre-assembled with an integrated DDC pump with armor heatsink and 5V addressable RGB lighting. It suits you if you want tidy tubing runs without mounting separate reservoir brackets, provided your radiators stay within the 30mm thickness limit.
Pros
- Case-matched direct fit for Corsair 5000D chassis
- Integrated DDC pump with armor heatsink
- Built-in 5V addressable RGB LED strip
- Pre-assembled PMMA acrylic body with mounting hardware
Cons
- Restricted strictly to Corsair 5000D case layouts
- Limits installed radiator thickness to a maximum of 30mm
- Unit weight is 10 pounds before adding coolant
Good fit if
- You build a custom liquid loop inside a Corsair 5000D case.
- You want an integrated DDC pump with armored heatsink included.
- You plan to use radiators measuring 30mm thick or less.
Skip if
- You use any PC chassis other than the Corsair 5000D.
- You plan to mount liquid cooling radiators thicker than 30mm.
Verdict: Bykski Corsair 5000D Distro Plate with DDC Pump streamlines water-cooling routing by integrating loop channels, addressable lighting, and an armored pump directly into the 5000D chassis. It keeps your tubing lines organized as long as your cooling radiators do not exceed 30mm.
Specifications side by side
| Spec | Bykski O11 Dynamic XL Distro Plate with DDC Pump | Bykski InWin 925 Distro Plate with DDC Pump | Bykski Phanteks Evolv Shift X Distro Plate | Bykski Cougar Blazer Distro Plate with DDC Pump | Bykski DDC Pump Top Black Armor | Bykski Lian Li O11 Distro Plate with RGB | Bykski TT Level 20 XT Distro Plate with RGB | Bykski Lian Li Ghost Axe Distro Plate with DDC Pump | Bykski Corsair 680X Distro Plate with DDC Pump | Bykski 200mm DDC Reservoir Combo with ARGB | Bykski O11 Mini Distro Plate with 5V RGB | Bykski TT Core P3 Distro Plate with DDC Pump | Bykski Phanteks 719LTG Distro Plate with DDC Pump | Bykski Mini DDC Pump Reservoir Combo | Bykski Corsair 5000D Distro Plate with DDC Pump |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Socket Compatibility | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated | Lian Li PC-O11 MINI | not stated | not stated | not stated | not stated |
| Lighting | 5v Addressable RGB | 5v Addressable RGB | 5v Addressable RGB | 5v Addressable RGB | not stated | 5v Addressable RGB | 5v Addressable RGB | 5v Addressable RGB (RBW) | 5v Addressable RGB (RBW) | 5v A-RGB | 5v Addressable RGB | 5v Addressable RGB | 5v Addressable RGB | not stated | 5v Addressable RGB |
| Material | PMMA | PMMA | PMMA | Acrylic (PMMA) | Aluminum | Acrylic (PMMA) | Acrylic (PMMA) | PMMA (Acrylic) | PMMA (Acrylic) | PMMA, Aluminum | Acrylic (PMMA) | Acrylic (PMMA) | Acrylic (PMMA) | not stated | Acrylic (PMMA) |
| Reservoir Capacity | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated | 200mm PMMA | not stated | not stated | not stated | not stated | not stated |
| Radiator Size | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated | 200mm | not stated | not stated | not stated | not stated | not stated |
| Pump Compatibility | DDC | DDC | DDC | DDC | DDC | DDC | DDC | DDC | DDC | DDC | DDC | DDC | DDC | DDC | DDC |
| Dimensions | 16.7 × 5.67 × 1.32 inches | 14.9 × 5.24 × 1.32 inches | 12 × 6.1 × 1.24 inches | 14.2 × 4.13 × 1.32 inches | 4.33 × 4.33 × 4.33 inches | 13.5 × 5.22 × 1.32 inches | 13.8 × 7.93 × 1.32 inches | 11.6 × 4.96 × 1.32 inches | 15.7 × 6.89 × 1.32 inches | 10 × 2.76 × 2.76 inches | 2.44 × 2.44 × 2.28 inches | 16.5 × 4.74 × 1.32 inches | 17.8 × 5.39 × 1.32 inches | 4.02 × 2.44 × 2.44 inches | 13.9 × 4.84 × 1.2 inches |
| Weight | 10 pounds | 10 pounds | 10 pounds | 10 pounds | 2 pounds | 10 pounds | 10 pounds | 10 pounds | 10 pounds | 3 pounds | 5 pounds | 10 pounds | 8 pounds | 2 pounds | 10 pounds |
| Size | DDC Pump With Armor | DDC Pump With Armor | DDC Pump With Armor | DDC Pump With Armor | not stated | DDC Pump With Armor | DDC Pump With Armor | DDC Pump With Armor | DDC Pump With Armor | 200mm | DDC Pump With Armor | DDC Pump With Armor | DDC Pump With Armor | not stated | DDC Pump With Armor |
| Color | not stated | not stated | Transparent | not stated | Black | Frosted | Transparent | not stated | not stated | Black | Transparent | not stated | not stated | Black | not stated |
If your build requires a light color theme, you can evaluate the specs of the best white CPU coolers for your clearance and airflow requirements.
How to choose the right DDC distro plate
-
Check your case model
Each distro plate is engineered for a specific chassis, such as the Lian Li O11 Dynamic XL or the Corsair 680X. You must select the version that fits your enclosure perfectly. The Bykski O11 Dynamic XL Distro Plate provides a dedicated layout for this full-tower case with a 16.7-inch length. Using the wrong plate will prevent proper mounting and may block other components inside your build.
-
Verify radiator thickness limits
Every listed distro plate restricts radiator thickness to 30mm. You need to measure your current radiators or check the specs of new ones before purchasing. If you plan to use thick 45mm radiators, none of these plates will work with your loop design. Stick to slim 30mm radiators to ensure the fluid flows correctly through the integrated channels without obstruction or pressure issues in your custom loop.
-
Consider lighting preferences
Most plates feature integrated 5V addressable RGB lighting for a uniform look. The Bykski 200mm DDC Reservoir Combo with ARGB combines a 200mm PMMA tube with protective aluminum armor and integrated 5V lighting. If you prefer a subtle appearance, the Bykski Mini DDC Pump Reservoir Combo offers a black finish without lighting. Match the lighting type to your motherboard headers for easy synchronization.
-
Evaluate size and footprint
The physical dimensions vary significantly across the list. The Bykski Lian Li PC-O11 Mini DDC Distro Plate delivers a compact 2.44-inch square footprint ideal for small builds. In contrast, the Bykski Phanteks 719LTG Distro Plate spans 17.8 inches. Measure your available space carefully. A larger plate might interfere with side panels or other components, while a smaller plate saves room for additional tubing or hardware.
-
Assess pump compatibility
All options in this guide support DDC pumps with armor. This ensures a direct mounting interface without needing adapters. The Bykski Mini DDC Pump Reservoir Combo provides a standalone alternative for those who do not need a full distro plate. Verify that your chosen pump matches the DDC specification. This compatibility guarantees secure attachment and proper electrical connection for reliable operation within your custom liquid cooling loop.
Frequently asked questions
Do all Bykski DDC distro plates support thick radiators?
No. Every listed distro plate restricts radiator thickness to 30mm. This limit ensures the reservoir and pump fit within the chassis without interfering with other components. You must verify your radiator specs match this constraint before purchasing.
Which Bykski DDC part is best for a Lian Li O11 Dynamic XL?
The Bykski O11 Dynamic XL Distro Plate with DDC Pump is the top choice for this full-tower case. It features a 16.7-inch length that standardizes tube runs. The layout includes a dedicated PMMA reservoir manifold tailored for this specific enclosure.
Can I use a Bykski distro plate in any case?
No. Each plate is engineered for a specific chassis, such as the Corsair 680X or Phanteks Evolv Shift X. You must select the version that fits your enclosure. Using the wrong plate will result in improper mounting and routing issues.
What lighting do these Bykski DDC components include?
Most distro plates feature RGB or 5V addressable RGB lighting. The 200mm DDC Reservoir Combo also includes integrated 5V ARGB. This lighting helps visualize coolant flow and adds aesthetic value to your custom loop build inside the case.
Is there a standalone DDC pump option without a distro plate?
Yes. The Bykski Mini DDC Pump Reservoir Combo provides a standalone alternative. It offers PWM-controlled DDC compatibility in a compact 4.02-inch frame. This option is ideal for compact loops that do not require a chassis-specific distribution plate.
How much fluid capacity does the 200mm DDC Reservoir Combo have?
The Bykski 200mm DDC Reservoir Combo combines a 200mm PMMA tube with protective aluminum armor. Its 10.04-inch length provides substantial fluid capacity. You should check your chassis clearance to ensure this larger reservoir fits comfortably within your build.
Do I need a special pump for these Bykski plates?
You need a DDC pump. Every listed distro plate is designed specifically for DDC pump compatibility. The plates include integrated armored DDC pump mounting points. Ensure your pump matches this specification for proper fit and function within the reservoir manifold.