Bloepum Water Cooling Block 2280/22110 Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This bloepum water cooling block 2280 22110 review covers a cooling solution for M.2 NVMe drives. It supports both 2280 and 22110 form factors. The unit features double-sided heat dissipation to manage thermal loads. You get a black anodized finish on the aluminum base. Dimensions are 3.94 by 3.15 inches, with a height of 1.97 inches. The total weight is 3.53 ounces. This compact design fits into most standard PC cases. It aims to keep your storage drives cool during heavy workloads.
What stands out
- Compatible with 2280 and 22110 M.2 NVMe SSDs
- Double-sided heat dissipation design for improved thermal transfer
- Compact dimensions: 3.94 x 3.15 x 1.97 inches
- Lightweight at 3.53 ounces
- Black finish on the cooling block
Who it fits
Good fit for
You should consider this block if you use 2280 or 22110 NVMe drives in a liquid cooling loop. It suits gamers and creators who push their storage with large file transfers. The double-sided design helps manage heat in tight cases. If you want to extend the lifespan of your SSD through active cooling, this spec-focused option delivers. It is ideal for builders who already have a custom loop or AIO system ready for additional blocks.
Who should skip it
You should look elsewhere if you use 2242, 2260, or other non-standard M.2 sizes. The data only lists support for 2280 and 22110. If you need a single-sided cooling solution, this double-sided design may not fit your motherboard layout. Also, if you require software control or RGB lighting, this block does not include those features. It is a passive thermal transfer device that relies entirely on your loop's flow and radiator setup for performance.
Verdict: This block offers straightforward thermal management for specific M.2 sizes. It is a practical choice for custom loop builders needing extra cooling for their drives.
Key specs explained
Color: Black
This finish provides a standard, neutral look for your build. It matches most dark-themed PC cases and other cooling components. You do not need to worry about clashing with bright RGB lighting or white chassis parts. The black anodized aluminum base offers a clean aesthetic. It helps the block blend into the background of your custom loop rather than standing out as a visual focal point.
Width: 3.15 inches
This dimension defines the physical footprint on the side of your drive. You must ensure this width fits within your case or motherboard clearance. It is a standard size for most M.2 water blocks. Check your case manual to verify that this width does not interfere with nearby components like RAM sticks or VRM heatsinks. Proper spacing ensures easy installation and adequate airflow around the block.
Height: 1.97 inches
This measurement indicates how far the block protrudes from the SSD. You need sufficient vertical clearance above the drive. This height is typical for double-sided cooling blocks. Verify that your case side panel or other components will not press against this height. Adequate clearance prevents physical damage and ensures the block sits flush against the drive for effective heat transfer.
Length: 3.94 inches
This length corresponds to the 2280 form factor support. It covers the standard size M.2 NVMe drives. If you use a 22110 drive, the block may extend further. This length ensures full coverage of the controller and NAND chips. It helps distribute heat evenly along the drive. You can compare this length with other blocks to ensure it matches your specific drive size requirements.
Weight: 3.53 ounces
This weight reflects the mass of the aluminum block. It is light enough to avoid stressing the M.2 slot. You do not need additional support brackets for most standard installations. The weight ensures good thermal mass for heat absorption. It is comparable to other aluminum water blocks. A lighter block is easier to handle during installation and reduces the risk of bending the drive.
Design and Build Details
According to the listing, this block is made for 2280 and 22110 M.2 NVMe SSDs. It uses a double-sided heat dissipation system. This layout helps move heat away from the drive efficiently. You do not need to worry about hot spots on the chips. The design supports intense data processing tasks without throttling. This is useful for professional setups or heavy gaming sessions.
The physical dimensions are 3.94 inches in length, 3.15 inches in width, and 1.97 inches in height. These measurements ensure it fits standard M.2 slots. The weight is listed at 3.53 ounces. This is light enough to avoid stressing the motherboard slot. You can install it without worrying about sagging or structural damage to your drive.
The finish is black. The listing describes it as an anodized aluminum base. This provides a neutral look for your build. It matches dark-themed cases and other cooling components. You do not need to worry about clashing with bright RGB lighting or white chassis parts. The model number is 500800057A1. This specific identifier helps you verify compatibility with your case layout. The design is straightforward and functional. It focuses on cooling performance rather than flashy aesthetics. You get a reliable cooling solution that integrates well into most PC builds.
Setup And Daily Use Guide
Installing this Bloepum water cooling block requires careful planning around your case layout and tubing routes. The unit measures 3.94 inches in length, 3.15 inches in width, and 1.97 inches in height. These dimensions mean you must verify clearance above and around your M.2 slots. It fits 2280 and 22110 form factor SSDs. The 22110 variant is significantly longer, so check your motherboard spacing before buying. You will need to remove the existing M.2 heatsink if one is present. The block weighs 3.53 ounces, which is light but adds mass to the drive assembly. You must ensure the tubing connections align with your pump and radiator loop. Daily use relies on your liquid cooling system running continuously. The double-sided heat dissipation design helps move thermal energy away from the SSD controller and NAND chips. This should keep temperatures stable during heavy file transfers or gaming sessions. The black finish blends into most builds without drawing attention. You do not need to adjust settings after installation. Once the loop is filled and bled, the block operates passively based on coolant flow. It does not have fans or active components. Performance depends entirely on your loop’s flow rate and radiator size. If your loop runs hot, the SSD may still throttle despite the block. Ensure your coolant is clean and your pump is reliable for consistent cooling results.
Before You Buy This Block
You need a compatible loop to use this block. It connects to your radiator and pump via standard tubing fittings. Check your reservoir height and pump placement. The unit weighs 3.53 ounces, so it adds minimal stress to your drive. You must ensure your case has enough vertical clearance. The block measures 1.97 inches in height. This may interfere with tall RAM sticks or CPU coolers. Verify that your motherboard tray allows for the required tubing bends. You should also check your SSD thickness. Some NVMe drives have thick heatsinks that might prevent the block from seating properly. This product fits well in custom loops. It complements other AIO solutions by handling M.2 thermal loads. You do not need additional fans for this specific component. Regular maintenance involves checking for leaks and ensuring the coolant is clean. Keep your loop free of debris to maintain optimal heat transfer efficiency.
Check before you buy
- Verify vertical clearance in your case for the 1.97 inch height
- Check SSD thickness to ensure proper block seating
- Confirm loop fittings match your tubing size
- Ensure RAM or CPU cooler does not block access
The product at a glance
Bloepum 2280/22110 SSD Water Block
Best for: 2280/22110 NVMe SSD liquid cooling
- Dimensions
- 3.94 × 3.15 × 1.97 inches
- Weight
- 3.53 ounces
View on Amazon: Bloepum 2280/22110 SSD Water Block Affiliate link
This Bloepum water cooling block supports both 2280 and 22110 M.2 NVMe SSDs. It features a double-sided heat dissipation design to manage thermal loads. The unit measures 3.94 inches in length, 3.15 inches in width, and 1.97 inches in height. It weighs 3.53 ounces and arrives in black. You should consider this if you need a compact liquid cooling solution for high-performance storage drives in your system.
Pros
- Compatible with 2280 and 22110 M.2 NVMe SSDs
- Double-sided heat dissipation design
- Compact dimensions at 3.94 x 3.15 x 1.97 inches
- Lightweight at 3.53 ounces
Cons
- Limited to 2280 and 22110 form factors only
- No mention of included mounting hardware or fittings
- Single color option available in black
Good fit if
- You use 2280 or 22110 M.2 NVMe SSDs
- You have an AIO loop for storage cooling
- You need a low-profile cooling block
Skip if
- You use 2230, 2242, or 2260 SSDs
- You need air cooling only
- You require RGB lighting effects
Verdict: Bloepum 2280/22110 M.2 NVMe Water Block fits users with 2280 or 22110 drives who want to route liquid cooling through their storage. It provides a compact double-sided cooling solution for those building specialized thermal setups.
Specifications side by side
| Spec | Bloepum 2280/22110 SSD Water Block |
|---|---|
| Dimensions | 3.94 × 3.15 × 1.97 inches |
| Weight | 3.53 ounces |
| Color | Black |
| Model | 500800057A1 |
Frequently asked questions
Does the Bloepum 2280/22110 water block fit standard M.2 drives?
Yes, it supports both 2280 and 22110 form factors. This versatility allows you to cool longer or standard NVMe SSDs. The block is designed to mount directly over the drive. You get a secure fit for common storage sizes without needing adapters. It handles the thermal load for these specific drive dimensions effectively.
What are the exact dimensions of this cooling block?
The block measures 3.94 inches in length, 3.15 inches in width, and 1.97 inches in height. These compact dimensions help it fit in tighter spaces. You must check your case clearance before installation. The size ensures it does not obstruct nearby components while providing adequate surface area for heat dissipation.
How much does the Bloepum water block weigh?
It weighs 3.53 ounces. This light weight minimizes stress on your M.2 slot. You do not need additional brackets for support in most cases. The low mass makes it easy to handle during loop assembly. It adds negligible bulk to your overall system build compared to larger cooling solutions.
What color is the Bloepum SSD water block?
The unit features a black finish. This neutral color matches most dark-themed PC builds. It blends well with black anodized aluminum bases and other dark components. You can integrate it seamlessly into a monochrome aesthetic. The black look remains consistent across different lighting conditions in your case.
Is this block suitable for double-sided cooling?
Yes, it provides double-sided heat dissipation. This design helps manage thermal loads more efficiently. Heat transfers from both sides of the NVMe drive. You get better temperature regulation for high-performance storage. This feature is crucial for maintaining stable speeds during heavy data transfers.
What is the model number for this Bloepum block?
The model number is 500800057A1. You can use this identifier to find replacement parts or verify compatibility. It helps distinguish this specific unit from other Bloepum products. Keeping this number handy ensures you order the correct fittings or accessories. It also aids in technical support inquiries if needed.
Can I use this block with 22110 SSDs?
Yes, the block is compatible with 22110 drives. It accommodates the longer form factor alongside standard 2280 sizes. You can cool larger capacity NVMe SSDs effectively. The design accounts for the extended length of 22110 modules. This makes it a flexible choice for various storage configurations.