Bykski 360mm Universal PMMA Distro Alternatives: 6 Similar Picks Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
You are looking for bykski 360 universal distro plate alternatives to organize your custom loop. The original Bykski 360mm Universal PMMA Distro Plate offers a non-case-specific design that fits any 360mm radiator. It features full PMMA construction, 5v Addressable RGB lighting, and supports a DDC pump. This universal approach provides flexibility for builders who want clean parallel tubing runs without locking into a proprietary chassis.
However, you might prefer a specialized solution for your specific case. The alternatives listed here were chosen because their specs overlap with the original, such as PMMA material and DDC pump compatibility. Other options include case-matched plates for the Phanteks Evolv Shift X, Lian Li O11 Air Mini, and Thermaltake View 51. These picks offer pre-assembled convenience and integrated aesthetics tailored to specific chassis designs. You should consider these if you prioritize a seamless look over universal mounting flexibility.
How each alternative compares
Bykski Phanteks Evolv Shift X Distro Plate
The Bykski Phanteks Evolv Shift X Distro Plate is designed specifically for that chassis, whereas the original fits any 360mm radiator mount. It includes a DDC pump with armor, adding 4 pounds to the 10-pound total weight. The unit is shorter at 12 inches long but slightly wider at 6.1 inches. You gain a pre-assembled loop center tailored to one case. You lose the flexibility to move the distro to a different build. Pick this if you own the Shift X and want a clean, integrated look without managing separate components.
Bykski Lian Li O11 Air Mini Distro Plate
This Bykski Lian Li O11 Air Mini Distro Plate targets a specific mini-ITX case, unlike the universal original. It comes with a DDC pump and armor, bringing the weight to 10.1 pounds. The dimensions are more compact, measuring 11.3 inches in length and 5.24 inches in width. You get a specialized solution that integrates perfectly with the O11 Air Mini. You sacrifice universal compatibility for a case-matched aesthetic. Choose this alternative if your build is confined to the O11 Air Mini and you prefer a pre-assembled pump setup over a bare plate.
Bykski TT View 51 Distro Plate with DDC Pump
The Bykski TT View 51 Distro Plate is built for the Thermaltake View 51 TG ARGB case, not for universal use. It includes a DDC pump with armor, weighing 10 pounds. It is the longest unit at 17.3 inches and the widest at 6.42 inches. You receive a specialized, pre-assembled center with black PMMA aesthetics. You give up the ability to use it in other cases. Select this option if you own the View 51 and want a large, integrated distro that matches the case's specific mounting points and visual style.
PrimoChill ZEAGINAL Z16 Distro Plate with Pump
The PrimoChill ZEAGINAL Z16 Distro Plate is a case-specific solution for the ZEAGINAL Z16, unlike the universal original. It weighs 5 pounds and includes a pre-assembled pump and RGB lighting. The data does not list dimensions, but it is clearly tailored to one chassis. You get a specialized fit for that specific case. You lose the flexibility to install it in any case with a 360mm radiator. Pick this if you own the Z16 and want a complete, integrated pump and lighting solution without the complexity of building separate components.
Bykski O11 Dynamic XL Distro Plate with DDC Pump
The Bykski O11 Dynamic XL Distro Plate is designed for the Lian Li O11 Dynamic XL, not for universal mounting. It includes a DDC pump with armor, weighing 10 pounds. It measures 16.7 inches in length and 5.67 inches in width. You gain a specialized, pre-assembled solution with integrated RGB lighting. You sacrifice universal compatibility for a case-matched aesthetic. Choose this alternative if your build is in the O11 Dynamic XL and you want organized tubing and a clean look that fits the case exactly, rather than using a generic plate.
Bykski InWin 925 Distro Plate with DDC Pump
The Bykski InWin 925 Distro Plate is built for the InWin 925 case, unlike the universal original. It includes a DDC pump with armor, weighing 10 pounds. It is 14.9 inches long and 5.24 inches wide. You get a specialized, pre-assembled center with PMMA construction and RGB lighting. You lose the ability to use it in other cases. Pick this if you own the InWin 925 and want an integrated pump and clean tubing lines. It offers a case-matched aesthetic that the universal plate cannot provide, making it ideal for specific builds.
Quick picks
Our 7 picks
Bykski 360mm Universal PMMA Distro Plate
Best for: custom loops using standard 360mm mounts
- Radiator Size
- 360
- Lighting
- 5v Addressable RGB
- Material
- PMMA
- Pump Compatibility
- DDC
- Dimensions
- 14.2 × 4.9 × 1.24 inches
- Weight
- 6 pounds
View on Amazon: Bykski 360mm Universal PMMA Distro Plate Affiliate link
This distribution plate uses a transparent PMMA acrylic body designed to mount in any chassis that accommodates a 360mm radiator. It measures 14.2 by 4.9 inches and integrates 5V addressable RGB lighting. You can run it standalone or pair it with an optional DDC pump. It suits builders seeking standardized mounting without case-specific constraints.
Pros
- Fits any standard 360mm radiator mount instead of requiring a specific case
- Integrated 5V addressable RGB lighting strip
- Supports optional DDC pump integration directly on the body
- Clear PMMA acrylic construction with included mounting hardware
Cons
- Radiator thickness cannot exceed 30mm
- Base unit does not include a pre-installed DDC pump
- Weighs 6 pounds without coolant or added hardware
Good fit if
- You have a chassis with open 360mm radiator clearance.
- You plan to use a 30mm or thinner radiator.
- You want a universal PMMA distribution plate compatible with DDC pumps.
Skip if
- You need to mount a radiator thicker than 30mm.
- You use a D5 pump instead of a DDC unit.
Verdict: Bykski 360mm Universal PMMA Distro Plate provides standardized 360mm radiator mounting and DDC pump support for builders who want clean parallel runs without locking themselves into a proprietary chassis.
Bykski Phanteks Evolv Shift X Distro Plate
Best for: Phanteks Entho Evolv Shift X owners
- Lighting
- 5v Addressable RGB
- Material
- PMMA
- Pump Compatibility
- DDC
- Dimensions
- 12 × 6.1 × 1.24 inches
- Weight
- 10 pounds
View on Amazon: Bykski Phanteks Evolv Shift X Distro Plate Affiliate link
This Bykski distro plate is engineered specifically for the Phanteks Entho Evolv Shift X case. It features a full PMMA construction with integrated 5v addressable RGB lighting. The unit supports a DDC pump with an armor heatsink, simplifying loop layout with minimal tubing. It includes mounting hardware and is pre-assembled for quick installation. The design prioritizes clean parallel lines and visual appeal within this specific chassis.
Pros
- Engineered for specific fit in Phanteks Entho Evolv Shift X
- Supports DDC pump with armor heatsink
- Includes 5v addressable RGB lighting
- Pre-assembled and ready for installation
Cons
- Compatible only with the Phanteks 217XE case
- Maximum radiator thickness limited to 30mm
- No software control mentioned for lighting
Good fit if
- You own a Phanteks Entho Evolv Shift X case
- You want a pre-assembled distro plate with DDC pump support
- You prefer clean tubing runs with minimal complexity
Skip if
- You use a case other than the Phanteks Entho Evolv Shift X
- You need compatibility with radiators thicker than 30mm
- You require software control for RGB lighting
Verdict: Bykski Phanteks Shift X DDC PMMA Plate is a specialized solution for Phanteks Entho Evolv Shift X owners seeking an organized loop layout. It fits users who value pre-assembled convenience and specific case integration over universal compatibility.
Bykski Lian Li O11 Air Mini Distro Plate
Best for: Lian Li O11 Air Mini owners
- Lighting
- 5v Addressable RGB
- Material
- Acrylic (PMMA)
- Pump Compatibility
- DDC
- Dimensions
- 11.3 × 5.24 × 1.2 inches
- Weight
- 10.1 pounds
View on Amazon: Bykski Lian Li O11 Air Mini Distro Plate Affiliate link
This Bykski distro plate is engineered specifically for the Lian Li O11 Air Mini case. It features a full PMMA design with 5v Addressable RGB lighting. The unit includes a DDC pump with an armor heatsink, creating an inline loop centerpiece. It measures 11.3 inches in length and weighs 10.1 pounds. You should choose this if you want a case-specific fit that simplifies tubing runs and powers your entire loop from one central point.
Pros
- Engineered for a precise fit in the Lian Li O11 Air Mini case
- Includes a DDC pump with an integrated armor heatsink
- Features 5v Addressable RGB (RBW) lighting for visual customization
- Comes fully assembled and primed for quick installation
Cons
- Case-specific design limits use to the Lian Li O11 Air Mini only
- Radiators must not exceed 30mm in thickness for compatibility
- Weighs 10.1 pounds, which is heavier than standard distro plates
Good fit if
- You own a Lian Li O11 Air Mini case
- You want an inline pump setup to simplify tubing layout
- You prefer a fully assembled unit ready for installation
Skip if
- You use a different case model than the O11 Air Mini
- You need a distro plate compatible with thick radiators over 30mm
- You prefer a lighter build under 10 pounds
Verdict: Bykski Lian Li O11 Air Mini Distro is a specialized solution for owners of that specific chassis who want an integrated pump and clean tubing lines. It fits users prioritizing a case-matched aesthetic over universal compatibility.
Bykski TT View 51 Distro Plate with DDC Pump
Best for: Thermaltake View 51 TG ARGB owners
- Lighting
- 5v Addressable RGB (RBW)
- Material
- Acrylic (PMMA)
- Pump Compatibility
- DDC
- Dimensions
- 17.3 × 6.42 × 1.32 inches
- Weight
- 10 pounds
View on Amazon: Bykski TT View 51 Distro Plate with DDC Pump Affiliate link
This Bykski distro plate is engineered specifically for the Thermaltake View 51 TG ARGB case. It features a full PMMA construction with 5v addressable RGB lighting. The unit includes a DDC pump with an armor heatsink, simplifying loop assembly. It measures 17.3 inches in length and weighs 10 pounds. This setup is ideal for users seeking a pre-assembled, case-specific distribution plate with integrated pumping power.
Pros
- Includes DDC pump with armor heatsink
- Full PMMA acrylic construction
- 5v Addressable RGB lighting
- Pre-assembled for quick installation
Cons
- Designed exclusively for TT View 51 TG ARGB case
- Radiators must not exceed 30mm thickness
- Uses RBW protocol for lighting control
Good fit if
- You own a Thermaltake View 51 TG ARGB case
- You want a pre-assembled distro with a DDC pump
- You prefer a single-source component for loop center
Skip if
- You use a case other than the TT View 51 TG ARGB
- You need a distro without an integrated pump
- You require compatibility with radiators thicker than 30mm
Verdict: Bykski TT View 51 TG ARGB Distro is a specialized solution for owners of the Thermaltake View 51 TG ARGB case who want a pre-assembled loop center with a DDC pump and PMMA aesthetics.
PrimoChill ZEAGINAL Z16 Distro Plate with Pump
Best for: ZEAGINAL Z16 case owners
- Lighting
- 5v Addressable RGB
- Material
- PMMA
- Weight
- 5 pounds
View on Amazon: PrimoChill ZEAGINAL Z16 Distro Plate with Pump Affiliate link
This is a custom distro plate made for the ZEAGINAL Z16 case. It uses PMMA acrylic and includes a pump. The lighting is 5V Addressable RGB. It weighs 5 pounds. You need this specific case to use it. It fits users who want a single-solution loop with integrated lighting and pumping for that exact chassis.
Pros
- Compatible with ZEAGINAL Z16 case
- Includes pump
- 5V Addressable RGB lighting
- PMMA construction
Cons
- Limited to one specific case model
- No mention of app control
- No mention of software integration
Good fit if
- You own a ZEAGINAL Z16 case
- You want an all-in-one pump and plate solution
- You prefer 5V Addressable RGB lighting
Skip if
- You use a different case brand
- You need 12V RGB compatibility
- You want a universal fit plate
Verdict: PrimoChill Bykski ZEAGINAL Z16 PMMA Distro Plate is for ZEAGINAL Z16 owners who want a pre-assembled pump and lighting solution without building separate components.
Bykski O11 Dynamic XL Distro Plate with DDC Pump
Best for: Lian Li O11 Dynamic XL custom loop builds
- Lighting
- 5v Addressable RGB
- Material
- PMMA
- Pump Compatibility
- DDC
- Dimensions
- 16.7 × 5.67 × 1.32 inches
- Weight
- 10 pounds
View on Amazon: Bykski O11 Dynamic XL Distro Plate with DDC Pump Affiliate link
This Bykski distro plate is engineered for the Lian Li O11 Dynamic XL case. It features a full PMMA design with 5V addressable RGB lighting. The unit weighs 10 pounds and measures 16.7 inches long. It includes a DDC pump with an armor heatsink. This setup simplifies tubing runs for a clean loop layout.
Pros
- Full PMMA acrylic construction
- Includes 5V addressable RGB lighting
- DDC pump with armor heatsink included
- Pre-assembled for quick installation
Cons
- Case-specific fit for Lian Li O11 Dynamic XL only
- Heavy 10-pound weight
- No digital display option selected
Good fit if
- You own a Lian Li O11 Dynamic XL case
- You want a pre-assembled distro plate
- You prefer 5V addressable RGB lighting
Skip if
- You use a case other than the Lian Li O11 Dynamic XL
- You need a universal fit for multiple cases
- You want a lighter component under 10 pounds
Verdict: Bykski O11 Dynamic XL PMMA Distro offers a specialized, pre-assembled solution for Lian Li O11 Dynamic XL owners seeking organized tubing and RGB effects. It suits builders who prioritize case-specific aesthetics over universal compatibility.
Bykski InWin 925 Distro Plate with DDC Pump
Best for: InWin 925 case owners seeking integrated pump and RGB
- Lighting
- 5v Addressable RGB
- Material
- PMMA
- Pump Compatibility
- DDC
- Dimensions
- 14.9 × 5.24 × 1.32 inches
- Weight
- 10 pounds
View on Amazon: Bykski InWin 925 Distro Plate with DDC Pump Affiliate link
This Bykski distro plate fits the InWin 925 case. It uses PMMA acrylic and includes 5v Addressable RGB lighting. You get a DDC pump with armor heatsink pre-installed. The unit weighs 10 pounds and measures 14.9 inches long. It is assembled and ready for installation. This model simplifies loop layout with minimal tubing runs. It is designed specifically for the InWin 925 chassis.
Pros
- Includes DDC pump with armor heatsink
- 5v Addressable RGB lighting included
- Pre-assembled and primed for installation
- Full PMMA acrylic construction
Cons
- Designed exclusively for the InWin 925 case
- No software control or app mentioned
- Heavy at 10 pounds
Good fit if
- You own an InWin 925 case
- You want a pre-assembled loop centerpiece
- You prefer organized tubing layouts
Skip if
- You use a case other than the InWin 925
- You need universal compatibility across multiple chassis
- You want to control lighting via software
Verdict: Bykski InWin 925 PMMA Distro Plate is a specialized solution for owners of that specific case. It offers a clean, integrated look with the included DDC pump and RGB lighting. You should choose it if your case matches exactly.
Specifications side by side
| Spec | Bykski 360mm Universal PMMA Distro Plate | Bykski Phanteks Evolv Shift X Distro Plate | Bykski Lian Li O11 Air Mini Distro Plate | Bykski TT View 51 Distro Plate with DDC Pump | PrimoChill ZEAGINAL Z16 Distro Plate with Pump | Bykski O11 Dynamic XL Distro Plate with DDC Pump | Bykski InWin 925 Distro Plate with DDC Pump |
|---|---|---|---|---|---|---|---|
| Radiator Size | 360 | not stated | not stated | not stated | not stated | not stated | not stated |
| Lighting | 5v Addressable RGB | 5v Addressable RGB | 5v Addressable RGB | 5v Addressable RGB (RBW) | 5v Addressable RGB | 5v Addressable RGB | 5v Addressable RGB |
| Material | PMMA | PMMA | Acrylic (PMMA) | Acrylic (PMMA) | not stated | PMMA | PMMA |
| Pump Compatibility | DDC | DDC | DDC | DDC | not stated | DDC | DDC |
| Dimensions | 14.2 × 4.9 × 1.24 inches | 12 × 6.1 × 1.24 inches | 11.3 × 5.24 × 1.2 inches | 17.3 × 6.42 × 1.32 inches | not stated | 16.7 × 5.67 × 1.32 inches | 14.9 × 5.24 × 1.32 inches |
| Weight | 6 pounds | 10 pounds | 10.1 pounds | 10 pounds | 5 pounds | 10 pounds | 10 pounds |
| Size | No Pump | DDC Pump With Armor | DDC Pump With Armor | DDC Pump With Armor | not stated | DDC Pump With Armor | DDC Pump With Armor |
| Color | not stated | Transparent | not stated | Black | not stated | not stated | not stated |
| Model | not stated | not stated | not stated | not stated | RGV-ZG-Z16-K | not stated | not stated |
If you want audio gear alongside your liquid cooling setup, you can compare beats 360 alternatives by their specifications.
Frequently asked questions
Does the Bykski 360mm Universal PMMA Distro Plate include a pump?
No, this plate does not include a pump. It is sold as a standalone component with no pump included. You must purchase a compatible DDC pump separately to integrate it into your loop. The plate measures 14.2 inches in length and weighs 6 pounds without the pump assembly.
What type of lighting do these distro plates use?
All listed distro plates feature 5v Addressable RGB lighting. This allows you to sync colors with compatible motherboard software for unified aesthetic control. The PMMA material helps diffuse the light evenly across the plate surface. You get consistent visual effects without needing separate LED strips.
Are these plates compatible with any PC case?
Only the Bykski 360mm Universal PMMA Distro Plate offers broad compatibility. It supports standard 360mm radiator mounts without being locked to a specific chassis. Other options like the Phanteks or Lian Li versions are specialized for those exact cases. You should choose the universal model for flexibility.
Which pump is supported by these distro plates?
Every listed distro plate supports the DDC pump. Most models include the DDC pump with armor pre-installed for convenience. The universal plate requires you to add the pump yourself. This standardization ensures you can use widely available DDC pumps for reliable coolant circulation.
What material are these distro plates made from?
All options in this list are constructed from PMMA. This material provides a clear, glass-like appearance for your custom loop. It allows you to see the coolant flow and internal components clearly. The transparent or black finishes offer distinct visual styles while maintaining durability.
How heavy are the pre-assembled distro plates?
Pre-assembled plates generally weigh around 10 pounds. For example, the Bykski Phanteks Shift X and Lian Li O11 Air Mini models both weigh 10 pounds. The PrimoChill ZEAGINAL Z16 is lighter at 5 pounds. The universal plate without a pump weighs 6 pounds. You should verify case support limits.
Can I use these plates for a Lian Li O11 Dynamic XL build?
Yes, there is a specific Bykski O11 Dynamic XL Distro Plate available. It is designed for that chassis and includes a DDC pump with armor. The plate measures 16.7 inches in length. It provides an organized layout tailored to that specific case design rather than a universal fit.