Bykski Triple 80mm Thick Copper Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This bykski 80mm x 60mm rc review focuses on the Triple 80mm Thick Copper Radiator. It is a single-row cooling unit designed for high thermal performance. Two specs define its capability: the massive 60mm thickness and the use of red copper channels. The copper offers a thermal conductivity of up to 401 w/(M.K.). The unit measures 278.5mm in length and includes two G 1/4 ports. It supports 80mm fans, which are not included. The design prioritizes heat dissipation through a dense array of nine copper channels and wave fins.
What stands out
- Red copper construction with thermal conductivity up to 401 w/(M.K.)
- 60mm thickness provides superior cooling power compared to standard radiators
- Single row of nine copper channels for efficient heat transfer
- Includes M3 screws for 25mm fan thickness compatibility
- Rated for 1.5bar pressure with two G 1/4 ports
Who it fits
Good fit for
You should consider this radiator if you need maximum cooling density in an 80mm form factor. The 60mm thickness is ideal for setups where airflow space is limited but heat load is high. It suits custom loop builders who prioritize copper’s thermal properties. Users with 25mm thick 80mm fans will find the included M3x30mm screws convenient. It is also suitable for those who need a robust, high-pressure rated component for demanding thermal environments.
Who should skip it
Skip this if you are using fans thinner than 25mm without adjusting screw lengths, as longer screws may breach the radiator. The unit requires G 1/4 fittings, so it does not fit systems using other port standards. You should look elsewhere if you need a pre-assembled unit with fans, as they are sold separately. The narrow 81mm width may not fit all standard chassis mounts. Additionally, the weight of 5 pounds requires sturdy mounting points to support the copper mass safely.
Verdict: This radiator delivers high thermal performance through its thick copper design. It is a specialized choice for users needing dense cooling in an 80mm footprint.
Key specs explained
60mm thickness
This radiator is significantly thicker than standard 25mm units. The extra material allows for more copper mass and surface area to absorb heat. You get superior cooling power because the water has more time to release thermal energy. This spec benefits users who need maximum performance in tight spaces. It is ideal for high-TDP components that generate intense heat during sustained loads.
Red copper channels
The internal waterways and wave fins are made from red copper. This material has a high thermal conductivity of up to 401 w/(M.K.). This means heat moves from the base to the fins faster than with aluminum or other metals. You benefit from more efficient heat transfer. When shopping, this spec indicates a focus on raw thermal performance rather than corrosion resistance or cost savings.
2 G 1/4 ports
The unit has two connection points with G 1/4 thread standards. This is the common size for most custom loop fittings and barbs. You can connect two separate tubes or use a splitter. This spec ensures compatibility with standard hardware. You should check your existing fittings to confirm they match this thread size before purchasing. It offers flexibility for your loop design.
1.5bar pressure
This is the maximum pressure the radiator can withstand. It indicates the structural integrity of the copper construction. You need to ensure your pump does not exceed this limit to avoid damage. This spec is crucial for safety and longevity. Compare it with other radiators to ensure your system operates within safe limits. It defines the stress tolerance of the unit.
M3 mount thread
The radiator uses M3 screws for mounting fans. The listing includes M3 x 30mm screws for 25mm thick fans. You must select the correct screw length for your specific fans to prevent leaks. Using screws that are too long can puncture the radiator. This spec requires you to measure your fan thickness carefully. It ensures a secure and leak-free installation.
Design and build details
According to the listing, this radiator features a single row of nine copper channels. The water channels and wave fins are constructed from red copper. This material offers a thermal conductivity of up to 401 w/(M.K.). You benefit from this high conductivity because it allows the metal to transfer heat from the water to the fins more efficiently. The substantial thickness of 60mm adds significant copper mass. This extra material increases the surface area available for heat dissipation. You get superior cooling power because the water has more time to release thermal energy before returning to your loop.
The physical layout measures 278.5mm by 81mm by 60mm. You need to account for this depth when planning your case or chassis. The unit weighs five pounds. You must ensure your mounting points can support this weight without sagging. It includes two G 1/4 ports for tubing connections. You also receive twelve M3 x 30mm screws and twelve M3 x 5mm screws. You must select the correct screw length for your fans. Using screws that are too long can break through the radiator. This causes water leakage and voids the warranty. The maximum safe length is your fan thickness plus 5mm. You attach compatible 80mm fans using the M3 mount thread. You do not get fans included with the package. You need to purchase them separately to complete the assembly.
Installation and daily operation details
Setting up this radiator requires careful attention to mounting hardware. The listing includes twelve M3 x 30mm screws and twelve M3 x 5mm screws. You must choose the correct length based on your fan thickness. The 30mm screws fit fans that are 25mm thick. If you use thinner or thicker fans, you need different screws. The rule is fan thickness plus 5mm for the maximum screw length. Using screws that are too long will break through the radiator core. This causes water leakage and voids the warranty. You are responsible for sourcing the right fasteners if your fans do not match the standard 25mm profile.
The unit accepts standard 80mm fans. These fans are not included in the package. You need to purchase them separately. The mounting thread is M3, which is common for most case fans. The port thread is G 1/4, which is the standard size for most liquid cooling fittings. This means you do not need adapters for standard tubing.
Daily use relies on the radiator’s 60mm thickness. This dimension provides superior cooling power by allowing more time for heat to dissipate. The red copper channels and wave fins maximize surface area. The thermal conductivity of up to 401 w/(M.K.) helps transfer heat from the water to the fins quickly. You benefit from stable temperatures under load. The pressure rating is 1.5bar. This is sufficient for standard pump pressures in a loop. You do not need to worry about leaks if you install it correctly and use appropriate fittings. The weight is 5 pounds, so ensure your case or mount can support this mass securely.
Check compatibility before you buy
You need to verify your case can fit this unit. The listing states the dimensions are 278.5mm by 81mm by 60mm. You must ensure your chassis has enough clearance for this 60mm thickness. Standard cases often struggle with radiators this deep. You also need 80mm fans. The listing notes these are not included. You must purchase them separately. Check your fan thickness before ordering. The included M3 x 30mm screws are for 25mm thick fans. If you use thinner or thicker fans, you need different screw lengths. Using the wrong length can break the radiator and cause leaks. You should also check your pump pressure. This unit handles up to 1.5bar. Ensure your loop pump can manage this pressure without stress. This radiator suits users with spacious cases who need maximum cooling from a small footprint. It fits best in builds where space allows for deep radiators.
Check before you buy
- Verify your case has 60mm clearance depth.
- Confirm you have 80mm fans to install.
- Check fan thickness to select correct screws.
- Ensure your loop pump handles 1.5bar pressure.
The product at a glance
Bykski Triple 80mm Thick Copper Radiator
Best for: High-density cooling in small cases
- Radiator Size
- 80mm
- Material
- Red copper
- Thread Size
- G1/4"
- Fan Mount
- Triple Fan
- Dimensions
- 11 × 3.19 × 2.36 inches
- Weight
- 5 pounds
View on Amazon: Bykski Triple 80mm Thick Copper Radiator Affiliate link
This Bykski radiator measures 278.5mm by 81mm by 60mm. It uses a single row of nine copper channels for heat dissipation. The red copper fins offer high thermal conductivity. You get two G 1/4 ports for tubing. The unit weighs 5 pounds. It fits 80mm fans. This thick design suits builds needing dense cooling in a small footprint.
Pros
- 60mm thickness provides superior cooling power
- Red copper channels with 401 W/(m·K) conductivity
- Includes M3 screws for 25mm fan thickness
- Compact 80mm form factor
Cons
- Heavy at 5 pounds
- Requires precise screw length to avoid leaks
- Fans not included
Good fit if
- You need high cooling density in a small space
- You use 80mm fans
- You prefer copper construction
Skip if
- You need pre-installed fans
- You have limited weight capacity
- You prefer aluminum radiators
Verdict: Bykski 80mm Triple Copper Radiator offers dense cooling for tight cases. It fits users who prioritize copper performance and have 80mm fans ready.
Specifications side by side
| Spec | Bykski Triple 80mm Thick Copper Radiator |
|---|---|
| Radiator Size | 80mm |
| Material | Red copper |
| Thread Size | G1/4" |
| Fan Mount | Triple Fan |
| Size | 80mm |
| Dimensions | 11 × 3.19 × 2.36 inches |
| Weight | 5 pounds |
Frequently asked questions
Does the Bykski Triple 80mm Thick Copper Radiator fit standard 80mm fans?
Yes, it is designed for 80mm fans. The listing specifies a width of 81mm and a height of 60mm. You must select the correct screw length. The package includes M3 x 30mm screws for thick fans. Use the M3 x 5mm screws for thinner units. This ensures proper mounting without damaging the fins.
What is the total weight of this radiator?
The unit weighs five pounds. This mass comes from the dense copper construction. The listing confirms this weight for the full assembly. The heavy build helps with thermal stability. You need a sturdy mount to support this weight securely. The dimensions are 278.5mm by 81mm by 60mm.
How thick is the Bykski Triple 80mm radiator?
It is 60mm thick. This is significantly thicker than standard 25mm radiators. The extra depth allows for more copper channels. You get superior cooling performance from this mass. The listing highlights this thickness as a key feature. Ensure your case has enough clearance for this large profile.
What material are the water channels made of?
The channels are made of red copper. The listing states the water channels and wave fins use this material. Red copper offers high thermal conductivity. You benefit from efficient heat transfer from the water to the fins. This material choice prioritizes performance over corrosion resistance.
How many copper channels does this radiator have?
It features nine copper channels. The listing describes a single row of these channels. This layout maximizes surface area within the 80mm width. You get dense cooling in a compact space. The nine channels work with the wave fins to dissipate heat effectively.
Is this radiator suitable for small form factor cases?
Yes, it is ideal for small cases. The listing targets users who prioritize copper performance in tight spaces. Its 80mm width fits many compact chassis. However, the 60mm thickness requires careful clearance checks. You must verify your case can accommodate this depth. It is a high-density solution for limited room.
What screws are included for installation?
The package includes twenty-four screws total. You get twelve M3 x 30mm screws. You also get twelve M3 x 5mm screws. Choose the 30mm screws for thick fans. Use the 5mm screws for thinner fans. This variety ensures you can mount various fan types securely to the radiator frame.