Looking Beyond the Bykski TT Level 20 XT? 6 Alternatives Worth a Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
You might be looking for bykski distro plate tt level alternatives if the Thermaltake Level 20 XT fit does not match your current chassis. The original Bykski TT Level 20 XT distro plate offers a clean, integrated pump center for that specific case. It uses a transparent PMMA body and supports a DDC pump with an armor heatsink. The unit includes 5v addressable RGB lighting and measures 13.8 inches in length. It provides a pre-assembled solution that simplifies loop layout for owners of that specific chassis.
However, you may need a different size, color, or case compatibility. Some builders prefer a frosted finish or a shorter footprint to fit their specific tubing runs. Others might want a distro plate for a different case brand entirely. The alternatives listed here were chosen because their specs overlap with the original. They all feature DDC pump compatibility and RGB lighting. Each option provides a case-specific fit that ensures clean parallel lines and organized tubing routing. You can compare these options to find the best match for your build.
Our top pick: Bykski TT Level 20 XT Distro Plate with RGB.
Comparing Distro Plate Options
Bykski O11 Dynamic XL Distro Plate with DDC Pump
The Bykski LIAN LI O11 Dynamic XL Distro Plate shares the same DDC pump integration and transparent PMMA construction as the TT Level 20 XT model. It differs primarily in dimensions. This unit measures 16.7 inches in length and 5.67 inches in width, compared to the original’s 13.8-inch length and 7.93-inch width. The height remains identical at 1.32 inches. You should choose this alternative if you own a LIAN LI O11 Dynamic XL case. It provides the same pre-assembled convenience and RGB lighting but fits a different chassis architecture. The wider footprint accommodates the specific mounting points of that case while maintaining the same visual style and pump compatibility.
Bykski InWin 925 Distro Plate with DDC Pump
This Bykski InWin 925 Distro Plate matches the original in weight and pump type but varies significantly in size. It is 14.9 inches long and only 5.24 inches wide, making it narrower than the TT Level 20 XT plate. The height is also 1.32 inches. It retains the transparent acrylic body and integrated DDC pump with armor. You should select this option if you are building in an InWin 925 case. It offers the same organized loop center and RGB lighting but adapts to the unique internal layout of that chassis. The narrower width is a key difference, ensuring a proper fit where the original plate would not mount.
Bykski Phanteks Evolv Shift X Distro Plate
The Bykski Phanteks Evolv Shift X Distro Plate is the most compact option in this group. It measures 12 inches in length and 6.1 inches in width, both smaller than the TT Level 20 XT version. The height is slightly lower at 1.24 inches instead of 1.32 inches. It still includes the DDC pump with armor and transparent PMMA body with RGB lighting. You should pick this alternative if you own a Phanteks Entho Evolv Shift X case. It provides the same integrated pump solution but in a smaller form factor. The reduced dimensions are necessary to fit the specific constraints of that chassis while maintaining the clean, pre-assembled aesthetic you get with the original.
Bykski Cougar Blazer Distro Plate with DDC Pump
The Bykski Cougar Blazer Distro Plate is the narrowest option here, measuring only 4.13 inches in width. It is 14.2 inches long and 1.32 inches high, matching the original height but differing in width and length. It includes the same DDC pump with armor and transparent acrylic body with RGB lighting. You should choose this if you own a Cougar Blazer case. It offers the same pre-assembled loop center and pump integration but adapts to a much slimmer case profile. The significantly reduced width is the main difference, allowing it to fit cases where the wider TT Level 20 XT plate would not clear surrounding components.
Bykski Lian Li O11 Distro Plate with RGB
This Bykski Lian Li O11 Distro Plate differs from the original in material finish. It features a frosted acrylic body rather than the transparent PMMA found in the TT Level 20 XT version. The dimensions are 13.5 inches long, 5.22 inches wide, and 1.32 inches high. It retains the integrated DDC pump with armor and RGB lighting. You should select this alternative if you own a Lian Li O11 case and prefer a frosted aesthetic. It provides the same functional pump integration and tubing organization but with a different visual appearance. The slightly shorter and narrower dimensions accommodate the specific mounting requirements of that chassis.
Bykski Lian Li Ghost Axe Distro Plate with DDC Pump
The Bykski Lian Li Ghost Axe Distro Plate is the shortest unit listed, measuring 11.6 inches in length. It is 4.96 inches wide and 1.32 inches high. It shares the same DDC pump with armor, transparent PMMA body, and RGB lighting as the original. You should choose this option if you own a Lian Li Ghost Axe case. It offers the same pre-assembled convenience and pump integration but in a more compact form. The reduced length and width are critical for fitting the specific internal layout of that chassis. It provides identical functional benefits but adapts to a different physical footprint.
Quick picks
Our 7 picks
Bykski TT Level 20 XT Distro Plate with RGB
Best for: Thermaltake Level 20 XT pump integration
- Lighting
- 5v Addressable RGB
- Material
- Acrylic (PMMA)
- Pump Compatibility
- DDC
- Dimensions
- 13.8 × 7.93 × 1.32 inches
- Weight
- 10 pounds
This Bykski distro plate is designed specifically for the Thermaltake Level 20 XT case. It features a transparent PMMA body with integrated 5V addressable RGB lighting. The unit shown includes a DDC pump with an armor heatsink, simplifying your loop layout. It measures 13.8 inches in length and weighs 10 pounds. This assembly is ready for installation with minimal tubing runs. It suits users who want a centralized power hub for their cooling loop.
Pros
- Integrated 5V addressable RGB lighting strip
- Includes DDC pump with armor heatsink
- Pre-assembled PMMA acrylic construction
- Specific fit for Thermaltake Level 20 XT
Cons
- Limited to Thermaltake Level 20 XT case
- No software control or app mentioned
- Heavy at 10 pounds
Good fit if
- You own a Thermaltake Level 20 XT case
- You want a pre-assembled pump integration
- You prefer organized tubing layouts
Skip if
- You use a different case model
- You need remote control features
- You want a lighter build
Verdict: Bykski TT Level 20 XT PMMA Distro Plate fits owners of the Thermaltake Level 20 XT who want a clean, pump-integrated center for their loop. It is not suitable for other cases or users needing app control.
Bykski O11 Dynamic XL Distro Plate with DDC Pump
Best for: LIAN LI O11 Dynamic XL owners wanting an integrated pump
- Lighting
- 5v Addressable RGB
- Material
- PMMA
- Pump Compatibility
- DDC
- Dimensions
- 16.7 × 5.67 × 1.32 inches
- Weight
- 10 pounds
View on Amazon: Bykski O11 Dynamic XL Distro Plate with DDC Pump
This distro plate fits the LIAN LI O11 Dynamic XL case and includes a DDC pump with an armor heatsink. It uses a full PMMA acrylic design with 5V addressable RGB lighting. The unit measures 16.7 inches long and weighs 10 pounds. It is pre-assembled for quick installation. You should choose this if you want an inline pump solution that keeps tubing runs minimal and organized within your specific case.
Pros
- Includes a DDC pump with armor heatsink
- Full PMMA acrylic construction
- Features 5V addressable RGB lighting
- Pre-assembled and ready for installation
Cons
- Compatible only with the LIAN LI O11 Dynamic XL case
- Radiator thickness must not exceed 30mm
- No pump speed control or software mentioned in specifications
Good fit if
- You own a LIAN LI O11 Dynamic XL case
- You want a pre-assembled distro plate with a DDC pump
- You prefer minimal tubing runs for a clean look
Skip if
- You use a case other than the LIAN LI O11 Dynamic XL
- You need a distro plate without a pump
- Your radiator thickness exceeds 30mm
Verdict: Bykski LIAN LI O11 Dynamic XL Distro Plate is a specialized solution for owners of that specific case who want an integrated DDC pump and clean tubing layout. It suits builders prioritizing a pre-assembled, case-specific fit over universal compatibility.
Bykski InWin 925 Distro Plate with DDC Pump
Best for: InWin 925 case owners
- Lighting
- 5v Addressable RGB
- Material
- PMMA
- Pump Compatibility
- DDC
- Dimensions
- 14.9 × 5.24 × 1.32 inches
- Weight
- 10 pounds
This distro plate fits the InWin 925 case and includes a DDC pump with an armor heatsink. It measures 14.9 inches long and weighs 10 pounds. The unit features PMMA acrylic construction and 5v addressable RGB lighting. It is pre-assembled for quick installation. You get a complete loop centerpiece with integrated pumping power.
Pros
- Includes DDC pump with armor heatsink
- Pre-assembled for quick installation
- 5v addressable RGB lighting
- Full PMMA acrylic construction
Cons
- Specific to InWin 925 case only
- Heavier at 10 pounds
- Radiators must not exceed 30mm thickness
Good fit if
- You own an InWin 925 case
- You want a pre-assembled distro plate
- You use a DDC pump loop
Skip if
- You have a different case brand
- You need a pump-free plate
- You prefer lighter components
Verdict: Bykski InWin 925 DDC Pump Armor is a heavy, case-specific solution for InWin 925 owners who want a pre-assembled loop center with integrated pumping.
Bykski Phanteks Evolv Shift X Distro Plate
Best for: Phanteks Entho Evolv Shift X owners
- Lighting
- 5v Addressable RGB
- Material
- PMMA
- Pump Compatibility
- DDC
- Dimensions
- 12 × 6.1 × 1.24 inches
- Weight
- 10 pounds
This Bykski distro plate is built for the Phanteks Entho Evolv Shift X case. It features a transparent PMMA body with 5v addressable RGB lighting. The unit includes a DDC pump with an armor heatsink. Dimensions are 12 by 6.1 by 1.24 inches. It weighs 10 pounds. This kit simplifies tubing layout by integrating the pump into the distribution plate.
Pros
- Integrated DDC pump with armor heatsink
- 5v addressable RGB lighting included
- Specific fit for Phanteks Entho Evolv Shift X
- Transparent PMMA construction
Cons
- Limited to Phanteks Entho Evolv Shift X case compatibility
- Heavier build at 10 pounds
- No pump speed control mentioned in specifications
Good fit if
- You own a Phanteks Entho Evolv Shift X case
- You want a pre-assembled loop centerpiece
- You prefer 5v addressable RGB lighting
Skip if
- You use a case other than the Phanteks Entho Evolv Shift X
- You need a pump without an armor heatsink
- You require a lighter component under 5 pounds
Verdict: Bykski Phanteks Shift X PMMA Distro is a specialized solution for owners of the Phanteks Entho Evolv Shift X. It provides a clean, integrated pump setup for that specific chassis.
Bykski Cougar Blazer Distro Plate with DDC Pump
Best for: Cougar Blazer case owners
- Lighting
- 5v Addressable RGB
- Material
- Acrylic (PMMA)
- Pump Compatibility
- DDC
- Dimensions
- 14.2 × 4.13 × 1.32 inches
- Weight
- 10 pounds
View on Amazon: Bykski Cougar Blazer Distro Plate with DDC Pump
This Bykski distro plate is engineered specifically for the Cougar Blazer case. It includes a DDC pump with an armor heatsink and a 5V addressable RGB LED strip. The full PMMA acrylic body measures 14.2 inches in length. It arrives pre-assembled to simplify your loop layout. You get organized tubing runs and a clean visual centerpiece. This unit supports radiators up to 30mm thick. It is ideal for users who want a complete, case-specific cooling solution.
Pros
- Includes DDC pump with armor heatsink
- Pre-assembled full PMMA acrylic body
- Fits Cougar Blazer case specifically
- 5V addressable RGB lighting strip
- Supports radiators up to 30mm thick
Cons
- Limited to Cougar Blazer case compatibility
- No pump speed control mentioned
- Heavy at 10 pounds
Good fit if
- You own a Cougar Blazer case
- You want a pre-assembled distro plate
- You need a DDC pump included
Skip if
- You use a different case brand
- You prefer a pump-free design
- You need multi-case compatibility
Verdict: Bykski Cougar Blazer Distro Plate DDC Pump fits Cougar Blazer owners who want a complete, case-specific cooling centerpiece. It simplifies loop assembly with its pre-assembled design and included pump.
Bykski Lian Li O11 Distro Plate with RGB
Best for: Lian Li O11 users wanting pre-assembled cooling
- Lighting
- 5v Addressable RGB
- Material
- Acrylic (PMMA)
- Pump Compatibility
- DDC
- Dimensions
- 13.5 × 5.22 × 1.32 inches
- Weight
- 10 pounds
This Bykski distro plate fits the Lian Li O11 case. It features a frosted PMMA body with 5v Addressable RGB lighting. The unit includes a DDC pump with an armor heatsink. It measures 13.5 inches long and weighs 10 pounds. You get a pre-assembled loop centerpiece. It simplifies tubing runs for a clean look. This option suits users wanting organized water cooling.
Pros
- Includes DDC pump with armor heatsink
- Pre-assembled and ready for installation
- Frosted PMMA construction with 5v A-RGB lighting
- Designed for inline pump integration
Cons
- Heavier build at 10 pounds
- Limited to Lian Li O11 case compatibility
- Radiators must not exceed 30mm thickness
Good fit if
- You own a Lian Li O11 case
- You want a pre-assembled distro plate
- You prefer inline pump setups
Skip if
- You use a case other than Lian Li O11
- You need a pumpless unit
- You require support for thick radiators
Verdict: Bykski Lian Li O11 PMMA Distro Plate fits Lian Li O11 owners seeking a heavy, pre-assembled loop centerpiece. It delivers organized tubing routing with integrated DDC pump support.
Bykski Lian Li Ghost Axe Distro Plate with DDC Pump
Best for: LIAN LI Ghost Axe case builders
- Lighting
- 5v Addressable RGB (RBW)
- Material
- PMMA (Acrylic)
- Pump Compatibility
- DDC
- Dimensions
- 11.6 × 4.96 × 1.32 inches
- Weight
- 10 pounds
View on Amazon: Bykski Lian Li Ghost Axe Distro Plate with DDC Pump
This distro plate is engineered specifically for the LIAN LI Ghost Axe case. It features a full PMMA acrylic body with 5v Addressable RGB lighting. The unit includes a DDC pump with an armor heatsink. It measures 11.6 inches in length and weighs 10 pounds. It offers a clean, parallel tubing layout for organized water cooling. This setup is ideal for users seeking a case-specific fit with minimal tubing runs.
Pros
- Full PMMA acrylic construction
- Includes DDC pump with armor heatsink
- 5v Addressable RGB lighting
- Case-specific fit for LIAN LI Ghost Axe
Cons
- Limited to LIAN LI Ghost Axe case compatibility
- Heavy at 10 pounds
- No mention of digital display or software control
Good fit if
- You own a LIAN LI Ghost Axe case
- You want a pre-assembled distro plate with a DDC pump
- You prefer 5v Addressable RGB lighting
Skip if
- You use a case other than the LIAN LI Ghost Axe
- You need a pump-less version
- You require software control for lighting
Verdict: Bykski LIAN LI Ghost Axe Distro Plate provides a tailored solution for LIAN LI Ghost Axe owners. It simplifies loop layout with a pre-assembled DDC pump and acrylic body. It suits builders prioritizing case-specific integration over universal compatibility.
Specifications side by side
| Spec | Bykski TT Level 20 XT Distro Plate with RGB | Bykski O11 Dynamic XL Distro Plate with DDC Pump | Bykski InWin 925 Distro Plate with DDC Pump | Bykski Phanteks Evolv Shift X Distro Plate | Bykski Cougar Blazer Distro Plate with DDC Pump | Bykski Lian Li O11 Distro Plate with RGB | Bykski Lian Li Ghost Axe Distro Plate with DDC Pump |
|---|---|---|---|---|---|---|---|
| Lighting | 5v Addressable RGB | 5v Addressable RGB | 5v Addressable RGB | 5v Addressable RGB | 5v Addressable RGB | 5v Addressable RGB | 5v Addressable RGB (RBW) |
| Material | Acrylic (PMMA) | PMMA | PMMA | PMMA | Acrylic (PMMA) | Acrylic (PMMA) | PMMA (Acrylic) |
| Pump Compatibility | DDC | DDC | DDC | DDC | DDC | DDC | DDC |
| Dimensions | 13.8 × 7.93 × 1.32 inches | 16.7 × 5.67 × 1.32 inches | 14.9 × 5.24 × 1.32 inches | 12 × 6.1 × 1.24 inches | 14.2 × 4.13 × 1.32 inches | 13.5 × 5.22 × 1.32 inches | 11.6 × 4.96 × 1.32 inches |
| Weight | 10 pounds | 10 pounds | 10 pounds | 10 pounds | 10 pounds | 10 pounds | 10 pounds |
| Size | DDC Pump With Armor | DDC Pump With Armor | DDC Pump With Armor | DDC Pump With Armor | DDC Pump With Armor | DDC Pump With Armor | DDC Pump With Armor |
| Color | Transparent | not specified | not specified | Transparent | not specified | Frosted | not specified |
When you plan power requirements for your liquid-cooled build, you can compare thermaltake 650w tt smart bx1 alternatives.
Frequently asked questions
Which Bykski distro plate fits my case if not the Thermaltake Level 20 XT?
You must select a plate designed specifically for your chassis. Each model supports only one case type. For example, the O11 Dynamic XL plate fits only that specific case. The InWin 925 plate is exclusive to InWin cases. Always verify your case model before purchasing to ensure proper fit and compatibility.
Do these distro plates include a pump?
Yes, all listed models include a DDC pump with armor. You do not need to buy a separate pump unit. The pump is integrated directly into the distro plate assembly. This design simplifies your loop build by combining the water block and pumping mechanism into a single, pre-assembled component.
What lighting options are available on these Bykski plates?
Every model in this list features RGB lighting. You can customize the colors and effects to match your system theme. The lighting is built into the PMMA or acrylic body. This allows for visible illumination of the fluid and internal components without requiring additional external light strips.
Are these distro plates compatible with standard DDC pumps?
Yes, all units are designed for DDC pump compatibility. They use the standard DDC pump form factor with armor. This ensures consistent mounting and flow characteristics across all case-specific models. You can rely on the included DDC pump for reliable operation without needing adapters or custom mounts.
How heavy are these Bykski distro plate assemblies?
Each distro plate assembly weighs approximately 10 pounds. This weight comes from the dense PMMA material and the integrated DDC pump with armor. You must ensure your case has adequate support for this load. The substantial weight helps stabilize the loop center but requires secure mounting points.
Can I use these plates in any mid-tower case?
No, these plates are case-specific and not universally compatible. Each model is cut to fit a particular chassis interior. The TT Level 20 XT plate only fits that case. The O11 Dynamic XL plate only fits the O11 Dynamic XL. You cannot swap these between different case brands or models.
What material are these distro plates made from?
Most models use transparent PMMA or acrylic for the body. Some options offer frosted finishes for a softer light diffusion. The pump armor is typically metal. This combination provides durability and clear visibility of your coolant. The transparent material allows you to monitor fluid levels and flow easily.
Do these plates simplify loop assembly?
Yes, they simplify assembly by integrating the pump and distribution point. You get a pre-assembled unit that reduces tubing routing complexity. The design organizes connections in a central location. This approach minimizes the number of fittings and tubes needed, making the build process cleaner and more manageable for your specific case.