Bykski Dual Distro Plate Thermaltake Alternatives: 6 Similar Picks Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
You are looking for bykski dual distro plate thermaltake alternatives to find a better fit for your build. The original Bykski C750 PMMA Distro Plate is designed specifically for the Thermaltake CTE C750. It features a durable PMMA construction and 5V addressable RGB lighting. The unit weighs 8 pounds and measures 18.8 inches in length. It does not include a pump, which requires you to source one separately.
You might want a different option if you need an integrated pump or a different case compatibility. The alternatives on this list were chosen because their specs overlap with the original product. All listed items use PMMA material and 5V addressable RGB lighting. Some include a DDC pump with armor, which simplifies your loop assembly. Others are tailored for different cases like the O11 XL or InWin 925. These variations allow you to match the distro plate to your specific hardware and aesthetic preferences without compromising on the core cooling components.
Comparing Alternatives to Bykski C750
PrimoChill ZEAGINAL Z16 Distro Plate with Pump
The PrimoChill ZEAGINAL Z16 Distro Plate targets a completely different case ecosystem. It is built for ZEAGINAL Z16 chassis, not Thermaltake CTE C750. This means it offers no compatibility with your current case. It does include an integrated pump, whereas the Bykski C750 is pump-free. The material is also PMMA with 5V addressable RGB lighting, matching the original's aesthetic approach. It weighs five pounds, significantly less than the eight-pound Bykski unit. You should choose this only if you own a ZEAGINAL Z16. It provides a complete loop center for that specific case but cannot replace the Bykski plate in a Thermaltake build. It is a budget-friendly option for Z16 owners seeking pre-assembled components.
Bykski O11 Dynamic XL Distro Plate with DDC Pump
The Bykski O11 Dynamic XL Distro Plate serves Lian Li O11 XL cases, not Thermaltake CTE C750. It is incompatible with your current chassis. This unit includes a DDC pump with armor, unlike the pump-less Bykski C750. It is slightly shorter at 16.7 inches and narrower at 5.67 inches. The height is 1.32 inches, marginally taller than the 1.2-inch Bykski plate. It weighs ten pounds, two pounds heavier than the original. It uses PMMA and 5V addressable RGB lighting. You should pick this if you are building in an O11 XL case. It centralizes your loop with integrated pumping and clean tubing runs. It offers a fixed-mount solution for users prioritizing a pre-assembled look over flexible case compatibility.
Bykski InWin 925 Distro Plate with DDC Pump
The Bykski InWin 925 Distro Plate is designed exclusively for InWin 925 cases. It will not fit your Thermaltake CTE C750. This model includes a DDC pump with armor, providing a complete loop center, while the original requires a separate pump. It is the shortest option at 14.9 inches long and 5.24 inches wide. The height is 1.32 inches, slightly taller than the Bykski C750's 1.2 inches. It weighs ten pounds, heavier than the eight-pound original. It features PMMA construction and 5V addressable RGB lighting. Choose this if you own an InWin 925. It offers a clean aesthetic without complex tubing planning. It is a specialized solution for InWin owners seeking simplicity and pre-assembled components in a compact form factor.
Bykski Phanteks Evolv Shift X Distro Plate
The Bykski Phanteks Evolv Shift X Distro Plate fits Phanteks Entho Evolv Shift X cases only. It is not compatible with Thermaltake CTE C750. This unit includes a DDC pump with armor, unlike the pump-less original. It is the most compact option, measuring 12 inches long and 6.1 inches wide. The height is 1.24 inches, very close to the Bykski C750's 1.2 inches. It weighs ten pounds, two pounds more than the original. It uses transparent PMMA and 5V addressable RGB lighting. Select this if you are building in a Phanteks Evolv Shift X. It offers a streamlined inline pump solution with a clean, pre-assembled look. It is ideal for builders wanting integrated pumping and lighting in a small footprint for that specific case.
Bykski Cougar Blazer Distro Plate with DDC Pump
The Bykski Cougar Blazer Distro Plate is made for Cougar Blazer cases. It does not fit Thermaltake CTE C750. This model includes a DDC pump with armor, providing a complete loop center, while the original is pump-free. It is 14.2 inches long and 4.13 inches wide, making it narrower than the Bykski C750. The height is 1.32 inches, slightly taller than the 1.2-inch original. It weighs ten pounds, heavier than the eight-pound Bykski unit. It features PMMA construction and 5V addressable RGB lighting. Choose this if you own a Cougar Blazer. It delivers organized tubing routing and integrated pump cooling in one unit. It is a complete, pre-assembled loop centerpiece for Cougar Blazer owners seeking a tidy build.
Bykski Lian Li O11 Distro Plate with RGB
The Bykski Lian Li O11 Distro Plate is designed for Lian Li O11 cases. It is incompatible with Thermaltake CTE C750. This unit includes a DDC pump with armor, unlike the pump-less original. It is 13.5 inches long and 5.22 inches wide. The height is 1.32 inches, slightly taller than the Bykski C750's 1.2 inches. It weighs ten pounds, two pounds more than the original. It uses frosted PMMA and 5V addressable RGB lighting. Pick this if you are building in a Lian Li O11. It offers a pre-assembled, pump-included distro plate with clean, organized loop layout. It is a solid choice for users wanting a tidy build without complex assembly in that specific case.
Quick picks
Our 7 picks
Bykski C750 PMMA Distro Plate
Best for: Thermaltake CTE C750 custom loop builds
- Socket Compatibility
- Thermaltake CTE C750
- Lighting
- 5V Addressable RGB
- Material
- PMMA
- Dimensions
- 18.8 × 5.91 × 1.2 inches
- Weight
- 8 pounds
View on Amazon: Bykski C750 PMMA Distro Plate Affiliate link
This Bykski distro plate is tailored for the Thermaltake CTE C750 case. It features a PMMA body with 5V addressable RGB lighting. The unit measures 18.8 inches long and weighs 8 pounds. It includes pre-drilled mounting holes for installation. This plate is designed for custom loop builders seeking a polished look for this specific case.
Pros
- Specially designed fit for Thermaltake CTE C750
- Durable PMMA construction resists clouding
- 5V addressable RGB lighting support
- Includes pre-drilled mounting holes and hardware
Cons
- Sold as a no-pump version
- 8-pound weight adds significant mass
- Requires compatible 5V RGB controller or motherboard
Good fit if
- You own a Thermaltake CTE C750 case
- You want a custom look without buying a pump
- You prefer PMMA material for its clarity
Skip if
- You need a pre-assembled pump and reservoir combo
- You are building in a case other than the CTE C750
- You prefer a lighter setup under 5 pounds
Verdict: Bykski C750 PMMA Distro Plate offers a precise fit for the Thermaltake CTE C750 case with durable PMMA construction. It suits builders who want a high-end custom look and are willing to source their own pump separately.
PrimoChill ZEAGINAL Z16 Distro Plate with Pump
Best for: ZEAGINAL Z16 cases with 5v RGB
- Lighting
- 5v Addressable RGB
- Material
- PMMA
- Weight
- 5 pounds
View on Amazon: PrimoChill ZEAGINAL Z16 Distro Plate with Pump Affiliate link
This Bykski distro plate is designed specifically for the ZEAGINAL Z16 case. It features a precision custom layout and includes a pump. The unit uses 5v Addressable RGB lighting for visual effects. It weighs 5 pounds. This kit suits builders who want an integrated pump and reservoir solution for their specific case without buying separate components.
Pros
- Includes pump for integrated reservoir solution
- Uses 5v Addressable RGB lighting
- Precision custom layout for ZEAGINAL Z16
- PMMA material construction
Cons
- Limited to ZEAGINAL Z16 case only
- Heavy at 5 pounds
- No app control listed
Good fit if
- You own a ZEAGINAL Z16 case
- You want an included pump
- You prefer 5v Addressable RGB
Skip if
- You use a different case brand
- You need 12v RGB compatibility
- You want a lighter build
Verdict: Bykski ZEAGINAL Z16 PMMA Distro Plate fits ZEAGINAL Z16 owners seeking an all-in-one pump and reservoir kit with 5v Addressable RGB. It is not suitable for other cases.
Bykski O11 Dynamic XL Distro Plate with DDC Pump
Best for: O11 XL cases with DDC pump loops
- Lighting
- 5v Addressable RGB
- Material
- PMMA
- Pump Compatibility
- DDC
- Dimensions
- 16.7 × 5.67 × 1.32 inches
- Weight
- 10 pounds
View on Amazon: Bykski O11 Dynamic XL Distro Plate with DDC Pump Affiliate link
This Bykski distro plate fits the LIAN LI O11 Dynamic XL case. It includes a DDC pump with an armor heatsink and 5v addressable RGB lighting. The PMMA body measures 16.7 by 5.67 inches and weighs 10 pounds. It comes pre-assembled and primed for installation. This unit suits builders who want a centralized loop hub with inline pump integration.
Pros
- Includes DDC pump with armor heatsink
- 5v addressable RGB lighting strip included
- Pre-assembled and primed for quick setup
- Specifically engineered for LIAN LI O11 Dynamic XL
Cons
- Limited to LIAN LI O11 Dynamic XL case only
- Radiators cannot exceed 30mm in thickness
- No software control or app mentioned for lighting
Good fit if
- You own a LIAN LI O11 Dynamic XL case
- You prefer a centralized distribution hub
- You want a pre-assembled loop centerpiece
Skip if
- You use a case other than the O11 Dynamic XL
- You need software control for RGB effects
- You require radiators thicker than 30mm
Verdict: Bykski O11XL DDC Distro Plate is a fixed-mount solution for O11 XL owners. It centralizes your loop with a DDC pump and RGB lighting. It fits users who prioritize clean tubing runs over flexible case compatibility.
Bykski InWin 925 Distro Plate with DDC Pump
Best for: InWin 925 case owners seeking simplicity
- Lighting
- 5v Addressable RGB
- Material
- PMMA
- Pump Compatibility
- DDC
- Dimensions
- 14.9 × 5.24 × 1.32 inches
- Weight
- 10 pounds
View on Amazon: Bykski InWin 925 Distro Plate with DDC Pump Affiliate link
This Bykski distro plate is built specifically for the InWin 925 case. It features a full PMMA design with 5V addressable RGB lighting. The unit includes a DDC pump with an armor heatsink. It measures 14.9 inches long and weighs 10 pounds. You get a pre-assembled loop centerpiece. This setup simplifies tubing runs for a clean look in your build.
Pros
- Pre-assembled PMMA distro plate for quick installation
- Includes DDC pump with armor heatsink
- 5V addressable RGB lighting strip included
- Designed for minimal tubing runs in InWin 925
Cons
- Only compatible with the InWin 925 case
- No software control or app mentioned for RGB
- 1-year warranty is shorter than some competitors
Good fit if
- You own an InWin 925 case
- You want a pre-assembled DDC pump setup
- You prefer clean parallel tubing lines
Skip if
- You use a case other than InWin 925
- You need independent pump speed control
- You want to use a D5 pump instead
Verdict: Bykski InWin 925 DDC Distro Plate is a specialized solution for InWin 925 owners who want a pre-built loop center. It offers a clean aesthetic without requiring complex tubing planning.
Bykski Phanteks Evolv Shift X Distro Plate
Best for: Phanteks Entho Evolv Shift X owners
- Lighting
- 5v Addressable RGB
- Material
- PMMA
- Pump Compatibility
- DDC
- Dimensions
- 12 × 6.1 × 1.24 inches
- Weight
- 10 pounds
View on Amazon: Bykski Phanteks Evolv Shift X Distro Plate Affiliate link
This Bykski distro plate is built for the Phanteks Entho Evolv Shift X case. It features a transparent PMMA body and 5v addressable RGB lighting. The unit includes a DDC pump with an armor heatsink. It measures 12 inches by 6.1 inches and weighs 10 pounds. The design supports inline pump layouts for clean tubing runs. You get a pre-assembled plate ready for installation. It is compatible with radiators up to 30mm thick.
Pros
- Includes DDC pump with armor heatsink
- Transparent PMMA construction
- 5v addressable RGB lighting
- Pre-assembled for quick installation
Cons
- Specifically designed for Phanteks Entho Evolv Shift X case only
- Weighs 10 pounds, which is heavy for acrylic
- No pump option available in this variation
Good fit if
- You own a Phanteks Entho Evolv Shift X case
- You want an inline pump layout for cleaner tubing
- You prefer transparent acrylic over metal plates
Skip if
- You use a case other than the Phanteks Entho Evolv Shift X
- You need a version without the pump installed
- You require compatibility with radiators thicker than 30mm
Verdict: Bykski Phanteks Entho Evolv Shift X Distro Plate offers a streamlined inline pump solution for the specific Phanteks Entho Evolv Shift X case. It suits builders who want a clean, pre-assembled look with integrated pumping and lighting.
Bykski Cougar Blazer Distro Plate with DDC Pump
Best for: Cougar Blazer case owners needing a complete loop center
- Lighting
- 5v Addressable RGB
- Material
- Acrylic (PMMA)
- Pump Compatibility
- DDC
- Dimensions
- 14.2 × 4.13 × 1.32 inches
- Weight
- 10 pounds
View on Amazon: Bykski Cougar Blazer Distro Plate with DDC Pump Affiliate link
This Bykski distro plate is built for the Cougar Blazer case. It features a PMMA body with 5v addressable RGB lighting. The unit includes a DDC pump with an armor heatsink. It measures 14.2 inches long and weighs 10 pounds. You get a pre-assembled plate ready for installation. This setup simplifies tubing runs and powers your loop from the centerpiece.
Pros
- Includes DDC pump with armor heatsink
- Full PMMA acrylic construction
- 5v addressable RGB lighting strip
- Pre-assembled and primed for quick install
Cons
- Compatible only with Cougar Blazer case
- Radiators must not exceed 30mm thickness
- Heavier at 10 pounds than standard plates
Good fit if
- You own a Cougar Blazer case
- You want a pre-assembled distro plate
- You use a DDC pump in your loop
Skip if
- You have a case other than Cougar Blazer
- You need pump-less distro plate options
- You require radiator support over 30mm
Verdict: Bykski Cougar Blazer DDC Distro Plate fits Cougar Blazer owners who want a complete, pre-assembled loop centerpiece. It delivers organized tubing routing and integrated pump cooling in one unit.
Bykski Lian Li O11 Distro Plate with RGB
Best for: Lian Li O11 users wanting pre-assembled RGB distro
- Lighting
- 5v Addressable RGB
- Material
- Acrylic (PMMA)
- Pump Compatibility
- DDC
- Dimensions
- 13.5 × 5.22 × 1.32 inches
- Weight
- 10 pounds
View on Amazon: Bykski Lian Li O11 Distro Plate with RGB Affiliate link
This frosted PMMA distro plate fits the Lian Li O11 case. It includes a DDC pump with an armor heatsink and 5v addressable RGB lighting. The unit measures 13.5 by 5.22 inches and weighs 10 pounds. It is pre-assembled for quick installation. You get a centralized loop hub with minimal tubing runs. This setup suits users who want an organized, visually clean water-cooling build.
Pros
- Includes DDC pump with armor heatsink
- Features 5v addressable RGB lighting
- Pre-assembled and primed for installation
- Frosted PMMA material construction
Cons
- Case-specific fit for Lian Li O11 only
- No software control for lighting mentioned
- Heavy at 10 pounds
Good fit if
- You use a Lian Li O11 case
- You want a pre-assembled distro plate
- You prefer inline pump layouts
Skip if
- You use a case other than Lian Li O11
- You need software RGB control
- You prefer a lighter build
Verdict: Bykski Lian Li O11 DDC Distro Plate is a solid choice for Lian Li O11 owners seeking a pre-assembled, pump-included distro plate with RGB lighting. It delivers a clean, organized loop layout without requiring complex assembly.
Specifications side by side
| Spec | Bykski C750 PMMA Distro Plate | PrimoChill ZEAGINAL Z16 Distro Plate with Pump | Bykski O11 Dynamic XL Distro Plate with DDC Pump | Bykski InWin 925 Distro Plate with DDC Pump | Bykski Phanteks Evolv Shift X Distro Plate | Bykski Cougar Blazer Distro Plate with DDC Pump | Bykski Lian Li O11 Distro Plate with RGB |
|---|---|---|---|---|---|---|---|
| Socket Compatibility | Thermaltake CTE C750 | not stated | not stated | not stated | not stated | not stated | not stated |
| Lighting | 5V Addressable RGB | 5v Addressable RGB | 5v Addressable RGB | 5v Addressable RGB | 5v Addressable RGB | 5v Addressable RGB | 5v Addressable RGB |
| Material | PMMA | not stated | PMMA | PMMA | PMMA | Acrylic (PMMA) | Acrylic (PMMA) |
| Pump Compatibility | not stated | not stated | DDC | DDC | DDC | DDC | DDC |
| Dimensions | 18.8 × 5.91 × 1.2 inches | not stated | 16.7 × 5.67 × 1.32 inches | 14.9 × 5.24 × 1.32 inches | 12 × 6.1 × 1.24 inches | 14.2 × 4.13 × 1.32 inches | 13.5 × 5.22 × 1.32 inches |
| Weight | 8 pounds | 5 pounds | 10 pounds | 10 pounds | 10 pounds | 10 pounds | 10 pounds |
| Size | No Pump | not stated | DDC Pump With Armor | DDC Pump With Armor | DDC Pump With Armor | DDC Pump With Armor | DDC Pump With Armor |
| Model | not stated | RGV-ZG-Z16-K | not stated | not stated | not stated | not stated | not stated |
| Color | not stated | not stated | not stated | not stated | Transparent | not stated | Frosted |
If you compare other dual hardware, you can assess wecreat lumos dual alternatives by their published specifications.
Frequently asked questions
Does the Bykski C750 PMMA Distro Plate include a pump?
No, this plate does not include a pump. You must source your own pump separately to complete your loop. The product is sized as a standalone plate without integrated pumping hardware. This design suits builders who already have a preferred pump or want to customize their loop center components independently.
What lighting type do these distro plates use?
All listed options use 5V Addressable RGB lighting. This standard ensures compatibility with most modern motherboards that support 5V ARGB headers. You can control the lighting effects through your system software. This lighting type provides precise color control for each individual LED on the plate.
Which case is the PrimoChill ZEAGINAL Z16 Distro Plate for?
This plate is designed exclusively for ZEAGINAL Z16 cases. It is not compatible with Thermaltake CTE C750 or other chassis. If you own a ZEAGINAL Z16, this kit offers an all-in-one solution with an integrated pump. It is not suitable for builders using other case models.
Do the Bykski plates for O11 XL and InWin 925 include pumps?
Yes, both the Bykski O11 XL and InWin 925 distro plates include a DDC pump with armor. These are fixed-mount solutions that centralize your loop components. They provide a pre-assembled loop center, saving you from complex tubing planning. The DDC pump ensures reliable coolant circulation for your system.
Is the Bykski Phanteks Evolv Shift X plate transparent or frosted?
The Bykski Phanteks Evolv Shift X Distro Plate is transparent. It allows you to see the coolant flow and pump operation clearly. This model includes a DDC pump with armor for integration. It offers a streamlined inline pump solution specifically tailored for the Phanteks Entho Evolv Shift X case.
What is the material used for all these distro plates?
All products in this list are constructed from PMMA. PMMA, or acrylic, offers durability and a high-end aesthetic for custom loops. It provides a clear or frosted finish depending on the specific model. This material choice ensures a sturdy reservoir that can withstand the pressures of a custom water cooling loop.
Does the Bykski Lian Li O11 plate come with a pump?
Yes, the Bykski Lian Li O11 Distro Plate includes a DDC pump with armor. It is a pre-assembled solution for Lian Li O11 owners. The plate features a frosted finish and 5V addressable RGB lighting. This setup delivers a clean, organized loop layout without requiring complex assembly or separate pump sourcing.