Lian Li Galahad II Trinity SL Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This lian li galahad ii trinity sl review focuses on the core dimensions and build of the Lian Li Galahad II Trinity SL INF 360mm. It is an all-in-one liquid CPU water cooling kit designed for high-end systems. The two defining specs are its 360mm radiator size and its physical footprint of 13 inches in length, 10 inches in width, and 6 inches in height. These measurements determine which cases can accommodate the unit without modification. The model number G89.PW8-1W.00 identifies this specific variant. We will break down how these exact specifications impact your build choices and cooling potential.
What stands out
- 360mm radiator size for high heat dissipation capacity
- Overall length of 13 inches for case compatibility checks
- Width of 10 inches and height of 6 inches define fan slot requirements
- Multicolor lighting option for aesthetic customization
Who it fits
Good fit for
You should consider this kit if your PC case supports a 360mm radiator. The 13-inch length means you need sufficient clearance in the front or top mounting positions. Users building high-performance rigs with powerful CPUs will benefit from the large surface area provided by the 360mm block. The multicolor feature suits builders who want visible RGB effects. Check your case specifications carefully to ensure the 10-inch width and 6-inch height fit your intended mounting location without obstructing other components.
Who should skip it
You should look at another option if your case only supports 240mm or smaller radiators. The 13-inch length may not fit in compact mid-tower cases with limited front clearance. If you prefer a silent, non-RGB build, the multicolor feature might be unnecessary for your aesthetic. Users with very small form factor builds will find the 10-inch width and 6-inch height too large for their chassis. Always measure your available space before purchasing this specific 360mm configuration.
Verdict: This 360mm AIO is a solid choice for large cases that can accommodate its 13-inch length. Verify your case dimensions match the 10x6 inch profile before buying.
Key specs explained
Radiator Size: 360mm
This dimension indicates the total length of the cooling block's metal fins and tubes. You need a case with enough internal width to fit this length. Larger radiators generally offer more surface area for heat dissipation. This size suits high-performance CPUs that generate significant thermal loads. Compare this against 240mm or 280mm options if your case space is limited. It ensures robust cooling capacity for demanding tasks.
Model: G89.PW8-1W.00
This alphanumeric code is the unique manufacturer identifier for this specific unit. You should use this number when checking compatibility lists or searching for replacement parts. It distinguishes this exact configuration from other variants in the Galahad series. Keeping this record helps with warranty claims or technical support inquiries. It ensures you are referencing the precise hardware design rather than a general product line name.
Width: 10 inches
This measurement defines the horizontal span of the cooler assembly. You must verify that your PC case interior has at least this much clearance. It determines how the unit fits alongside other components like RAM or GPU shrouds. Standard cases often accommodate this width, but compact builds may struggle. Measure your available space carefully before installation to avoid physical interference with surrounding hardware.
Height: 6 inches
This value represents the vertical depth of the cooling unit. It affects clearance above the CPU socket and nearby memory modules. Taller coolers might block access to DIMM slots or interfere with air flow from case fans. Ensure your case supports this height dimension. It is a critical factor for ensuring proper component spacing and avoiding contact with other internal parts during assembly.
Length: 13 inches
This dimension specifies the vertical or longitudinal extent of the unit, depending on mounting orientation. It impacts the overall footprint within your chassis. You need sufficient clearance in this direction to mount the radiator securely. This length helps determine if the unit fits in standard or extended tower cases. Check your case specifications to confirm it supports this specific dimension for optimal installation.
Design and Build Overview
According to the listing, the Lian Li Galahad II Trinity SL INF 360mm kit uses a multicolor finish. This aesthetic choice suggests it is intended for cases with transparent panels where internal lighting and component colors are visible. The model number G89.PW8-1W.00 identifies this specific variant within the brand lineup.
The physical dimensions are listed as 13 inches in length, 10 inches in width, and 6 inches in height. These measurements describe the overall footprint of the unit. You must verify that your computer case can accommodate this specific length. The 360mm radiator size provides a large surface area for heat exchange. This requires adequate clearance around the mounting location.
The height of six inches is a critical specification for clearance. You need to ensure that your CPU cooler or motherboard components do not interfere with this height. The width of ten inches allows for standard mounting patterns. However, you should check for obstructions from RAM sticks or VRM heatsinks. The listing does not provide weight data. Therefore, you cannot assess the strain on the motherboard socket based on this information alone. The build appears focused on fitting standard 360mm radiator slots while maintaining a distinct visual profile through its color scheme.
Setup And Daily Use Overview
Installing this cooling kit requires careful planning around your case dimensions. The listing specifies a radiator length of 360mm. You must verify that your computer case has sufficient internal clearance to mount this length horizontally or vertically. The overall package measures 13 inches in length, 10 inches in width, and 6 inches in height. These physical boundaries determine where the unit can fit within your chassis. Ensure there is adequate space for the pump block on the CPU socket and the radiator fans on the case mounts. The multicolor finish indicates that the aesthetic elements are designed for visibility. This suggests you should position the unit where it can be seen through a tempered glass side panel. Daily operation relies on the sealed loop design. You do not need to add coolant or bleed air after installation. The system is ready to run once connected to your motherboard headers. The 360mm radiator size implies a larger surface area for heat exchange compared to smaller units. This configuration is intended for high-end systems that generate significant thermal output. You benefit from increased heat dissipation capacity during sustained workloads. The physical dimensions dictate your case choice. A compact case may not accommodate this size without modification. Standard ATX or E-ATX cases typically offer the necessary mounting points. The setup process is straightforward if your case supports 360mm radiators. You connect the power and control cables to the appropriate pins. The unit operates silently under light loads and ramps up fans as needed. The design prioritizes performance over compactness. You should ensure your airflow is optimized to support the larger radiator surface.
Before You Buy This Kit
Before you buy this Lian Li Galahad II Trinity SL INF 360mm, verify your case supports a 360mm radiator. The listing notes a length of 13 inches, so measure your mounting area carefully. You must ensure there is enough clearance for the pump head height and fan thickness. This kit is an all-in-one solution, so you do not need to source separate tubing or coolant. However, you should check if your motherboard headers support the required RGB connections for the multicolor lighting. Daily upkeep involves keeping the radiator fins clean from dust to maintain efficiency. This model fits well if you prioritize high-end cooling performance in a compact form factor. It sits alongside other premium options by offering a complete cooling loop without custom assembly. Ensure your CPU socket compatibility matches the block before finalizing your purchase. This approach saves time while delivering robust thermal management for demanding builds.
Check before you buy
- Verify your case supports a 360mm radiator mount
- Check clearance for pump head height and fans
- Confirm motherboard headers support the RGB lighting
- Ensure your CPU socket is compatible with the block
The product at a glance
Lian Li Galahad II Trinity SL INF 360mm
Best for: Spacious cases needing strong RGB cooling
- Radiator Size
- 360mm
- Dimensions
- 13 × 10 × 6 inches
View on Amazon: Lian Li Galahad II Trinity SL INF 360mm Affiliate link
The Lian Li Galahad II Trinity SL is a 360mm all-in-one liquid cooling kit designed for high-performance thermal management. It features a large radiator measuring 13 inches in length, 10 inches in width, and 6 inches in height. The multicolor lighting adds visual appeal to your build. This cooler suits users who need substantial cooling capacity for demanding CPUs while maintaining a compact footprint within their case.
Pros
- 360mm radiator size for enhanced heat dissipation
- Compact dimensions of 13x10x6 inches
- Multicolor RGB lighting for aesthetic customization
Cons
- Large radiator may not fit in smaller cases
- No mention of fan speed control in specs
- Limited information on pump noise levels
Good fit if
- You have a mid-tower or full-tower case with space for a 360mm radiator
- You want multicolor RGB lighting to match your build theme
- You need strong cooling performance for high-end processors
Skip if
- You are using a compact ITX case with limited radiator support
- You prefer silent operation and are sensitive to pump noise
- You want detailed fan control features not listed in the specs
Verdict: The Lian Li Galahad II Trinity SL 360mm AIO fits users who need a large, visually striking cooler for spacious cases. It delivers solid cooling capacity but lacks detailed control options in the provided data.
Specifications side by side
| Spec | Lian Li Galahad II Trinity SL INF 360mm |
|---|---|
| Radiator Size | 360mm |
| Dimensions | 13 × 10 × 6 inches |
| Color | Multicolor |
| Model | G89.PW8-1W.00 |
Frequently asked questions
Does the Lian Li Galahad II Trinity SL INF 360mm fit standard cases?
You need a spacious case to accommodate this cooler. The radiator measures 13 inches in length, which equals approximately 360mm. Most standard mid-tower cases may struggle with this width. You must verify that your chassis has enough internal clearance for such a large mounting area before purchasing.
What are the exact dimensions of the Lian Li Galahad II Trinity SL INF 360mm?
The unit has a length of 13 inches, a width of 10 inches, and a height of 6 inches. These measurements define the physical footprint you must plan around. Ensure your case supports these specific dimensions to avoid installation conflicts or airflow blockages.
Is the Lian Li Galahad II Trinity SL INF 360mm suitable for high-end systems?
Yes, it is designed for high-end systems. The 360mm radiator size provides substantial surface area for heat dissipation. This larger surface area helps manage thermal loads from powerful CPUs. It is a solid choice for users who prioritize cooling capacity alongside visual aesthetics in their builds.
What color options are available for the Lian Li Galahad II Trinity SL INF 360mm?
The listing specifies a multicolor finish for this model. This aesthetic is intended for cases with transparent side panels. The lighting effects are meant to be visible from the outside. You can expect vibrant visual output that complements other RGB components in your system.
What is the model number for the Lian Li Galahad II Trinity SL INF 360mm?
The specific model number is G89.PW8-1W.00. You can use this identifier to verify compatibility with your motherboard headers or case mounting points. It helps distinguish this specific variant from other products in the Lian Li lineup. Always check this number against your case specifications.
How does the 360mm size impact cooling performance?
A 360mm radiator offers more surface area than smaller sizes. This increased area allows for more efficient heat transfer from the coolant to the air. You get better thermal headroom for sustained workloads. The larger fins and tube arrangement help maintain lower CPU temperatures under heavy load.
Can I mount the Lian Li Galahad II Trinity SL INF 360mm vertically?
You must verify your case supports vertical mounting for a 13-inch radiator. The listing specifies a length of 13 inches, which is quite large. Not all cases allow for vertical installation of this size. Check your case manual to ensure the internal depth and width can accommodate this orientation.