MOD-ONE Alphacool DC-LT 2600 Pump Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This mod one alphacool DC lt 2600 ceramic review examines a compact bundle designed for tight builds. The set combines the Alphacool DC-LT ceramic 12 Volt pump with the Eisstation DC-LT Solo Top. You get a small form factor pump measuring just 51 x 48 x 9mm. The accompanying top adds 60 x 40 x 40.48 mm of height. It uses a standard 3-pin connector for easy integration. This setup offers a maximum flow rate of approximately 100 L/hr. It is a practical choice for those prioritizing space efficiency without sacrificing core cooling performance in a loop.
What stands out
- Compact pump dimensions of 51 x 48 x 9mm for small cases
- Alphacool DC-LT ceramic 12 Volt motor for reliable operation
- Includes Eisstation DC-LT Solo Top with reservoir
- Standard 3-pin connector for simple motherboard connection
- Maximum flow rate of approximately 100 L/hr
Who it fits
Good fit for
This bundle suits builders with small form factor cases who need to save space. The tiny pump footprint allows for installation in tight corners where larger pumps cannot fit. You will appreciate the integrated reservoir top, which simplifies tubing routing. It is ideal for users who want a clean, minimal look without complex external reservoirs. The 3-pin connector ensures compatibility with most motherboards. If you prioritize compactness and a unified design, this setup meets your needs.
Who should skip it
You should look at another option if you require high flow rates for extensive loops. The maximum flow rate of approximately 100 L/hr is modest compared to larger pumps. Users needing significant head pressure for long tubing runs may find this insufficient. The single reservoir top limits flexibility for complex multi-reservoir setups. If you prefer larger, more powerful pumps for extreme cooling demands, this compact bundle may not meet your performance expectations.
Verdict: This bundle offers a space-saving solution for compact builds with integrated reservoir functionality. It is a practical choice for users prioritizing form factor over maximum flow performance.
Key specs explained for this bundle
Maximum flow rate: Approximately 100 L/hr
This rating indicates the volume of coolant the pump moves each hour. You can use this figure to estimate how quickly heat transfers from your components to the radiator. Higher flow rates generally improve cooling efficiency in large loops. Compare this number with other 12V pumps to ensure it meets the demands of your specific system size and component count.
Pump Dimensions: 51 x 48 x 9mm
These measurements define the physical footprint of the pump itself. The low profile allows installation in tight spaces where standard pumps might not fit. You should check your case clearance and tubing routing to ensure this small size works with your layout. Compare these dimensions against your available space before purchasing to avoid fitment issues.
Pump Top Dimensions: 60 x 40 x 40,48 mm
This data describes the size of the reservoir top that attaches to the pump. You need to verify that these dimensions fit your chosen radiator or reservoir block. The height affects the overall height of your cooling loop. Compare this size with other tops to ensure it aligns with your aesthetic and spatial requirements in the build.
Small Form Factor Pump with 3-Pin connector
This specification highlights the compact design and the electrical interface. The 3-pin connector plugs directly into your motherboard fan header for speed control. You do not need extra controllers for basic operation. Compare this connector type with your motherboard headers to ensure compatibility. This setup simplifies wiring for smaller builds.
Design and Build Analysis
According to the listing, this bundle combines the Alphacool DC-LT ceramic 12 Volt pump with the Eisstation DC-LT Solo Top. The pump itself is a small form factor unit measuring 51 x 48 x 9mm. This compact footprint allows you to install it in tight spaces where larger pumps would not fit. It uses a 3-Pin connector for power, which is standard for many motherboard fan headers or controller ports.
The Eisstation DC-LT Solo Top serves as both the pump top and reservoir. Its dimensions are 60 x 40 x 40.48 mm. This shape creates a compact vertical stack. You can mount this assembly directly to your water block or loop without requiring extensive tubing runs. The ceramic material in the pump suggests durability and corrosion resistance, which is important for long-term loop health.
The overall design prioritizes space efficiency. The small size of both components means you can build a functional loop in cases with limited internal volume. The 3-Pin connector simplifies wiring, as you do not need specialized pump controllers. This setup is ideal for users who need a reliable, compact solution for small form factor builds.
Setup and everyday use
Installing this bundle requires careful planning due to its small form factor. The pump measures 51 x 48 x 9mm, which allows for placement in tight spaces where larger units would not fit. You must ensure your case or reservoir block has adequate clearance for these dimensions. The pump uses a 3-pin connector, meaning you will connect it to a motherboard header or a dedicated fan controller. This setup provides basic speed control without needing proprietary software or complex wiring. The Eisstation DC-LT Solo Top serves as both the reservoir and the mounting point for the pump. Its dimensions are 60 x 40 x 40.48mm. You need to verify that your tubing and fittings align with the top’s inlet and outlet ports. Once installed, the system relies on the pump’s maximum flow rate of approximately 100 L/hr. This figure dictates how quickly coolant circulates through your loop. In daily use, this flow rate supports standard cooling demands for most components. The ceramic construction of the DC-LT 2600 pump suggests durability and reduced noise compared to metal bearings, though specific decibel levels are not listed. You should monitor system temperatures during the initial run to confirm the flow rate meets your thermal needs. The compact design simplifies cable management, as the short pump body leaves more room for other components. Regular maintenance involves checking for leaks around the Eisstation connections and ensuring the 3-pin connection remains secure. This bundle is best suited for users building small form factor systems who need a reliable, compact cooling solution.
Before You Buy This Pump Bundle
You should verify your case has space for the Eisstation DC-LT Solo Top, which measures 60 x 40 x 40.48 mm. The pump itself is tiny at 51 x 48 x 9mm, but you must ensure your tubing fits the barbs on the top. This bundle uses a 3-pin connector, so you need a motherboard header or a compatible controller to power it. Unlike larger all-in-one units, this custom loop component requires you to source coolant and fittings separately. You are responsible for maintaining the fluid level and checking for leaks. This setup suits builders who prioritize a compact footprint over high flow rates. The 100 L/hr rating is modest, so it works best for small loops with few heat sources. If you need more flow, you may want a different pump. Keep your loop clean to protect the ceramic internals.
Check before you buy
- Check case clearance for the 60 x 40 x 40.48 mm reservoir top.
- Ensure your tubing inner diameter matches the Eisstation DC-LT barbs.
- Verify you have a 3-pin header or controller for the pump.
- Confirm your loop size suits the 100 L/hr maximum flow rate.
The product at a glance
MOD-ONE Alphacool DC-LT 2600 Pump & Reservoir Bundle
Best for: Small form factor builds needing compact cooling
- Pump Flow Rate
- 100 L/hr
View on Amazon: MOD-ONE Alphacool DC-LT 2600 Pump & Reservoir Bundle Affiliate link
This bundle pairs the Alphacool DC-LT ceramic 12V pump with the Eisstation DC-LT Solo Top. The pump features a small form factor measuring 51 x 48 x 9mm and delivers approximately 100 L/hr of flow. It uses a standard 3-pin connector. The top measures 60 x 40 x 40.48mm. This setup suits builders seeking a compact, low-noise solution for small form factor cases.
Pros
- Compact pump dimensions of 51 x 48 x 9mm
- Approximate flow rate of 100 L/hr
- Standard 3-pin connector for easy integration
- Includes Eisstation DC-LT Solo Top reservoir
Cons
- Flow rate is lower than high-performance 24V pumps
- Single channel design limits simultaneous loop expansion
- No integrated display or smart monitoring features
Good fit if
- You are building a small form factor PC
- You need a quiet, low-vibration pump solution
- You want a compact reservoir and pump combo
Skip if
- You require maximum flow rates for large loops
- You need a 24V pump for higher pressure
- You want integrated LCD screen monitoring
Verdict: Alphacool DC-LT 2600 Ceramic Pump Bundle is a compact, quiet solution ideal for small form factor builds. It fits builders who prioritize space savings and low noise over raw flow performance.
Specifications side by side
| Spec | MOD-ONE Alphacool DC-LT 2600 Pump & Reservoir Bundle |
|---|---|
| Pump Flow Rate | 100 L/hr |
| Model | TR-13289-15369 |
Frequently asked questions
What is the model number for this Alphacool pump bundle?
The specific model identifier for this MOD-ONE Alphacool DC-LT 2600 Pump and Reservoir Bundle is TR-13289-15369. You should use this code when checking compatibility with your existing tubing or when ordering replacement parts. It ensures you are referencing the exact ceramic pump and reservoir combination listed in the product data.
How quiet is the DC-LT 2600 ceramic pump during operation?
This pump is designed as a quiet solution for small form factor builds. It prioritizes low noise output alongside space savings. You can expect it to run quietly, making it suitable for builders who value acoustic performance. The ceramic bearing helps reduce friction and noise compared to standard plastic bearings.
What is the maximum flow rate of this pump?
The pump delivers a maximum flow rate of approximately 100 liters per hour. This figure represents the volume of coolant the unit moves in one hour. You can use this number to estimate heat transfer speed in your loop. Higher flow rates generally improve cooling efficiency in larger systems.
Does this bundle include a reservoir?
Yes, this bundle includes the Eisstation DC-LT Solo Top reservoir. It combines the DC-LT ceramic pump with this specific top. The reservoir measures 60 x 40 x 40.48 mm. You get a complete unit that handles both pumping and coolant storage in a compact package for tight builds.
What are the dimensions of the pump unit?
The pump itself measures 51 x 48 x 9mm. This tiny footprint allows for placement in very tight spaces where larger pumps would not fit. You must ensure your case has adequate clearance for these specific dimensions. The compact size is its primary advantage for small form factor builds.
What is the voltage requirement for this pump?
The Alphacool DC-LT pump operates on 12 Volts. This is the standard voltage for most PC components and power supplies. You can connect it directly to a motherboard fan header or a dedicated pump controller. Ensure your power source provides stable 12V DC for optimal performance and longevity.
Is this pump suitable for small form factor cases?
Yes, this bundle is ideal for small form factor builds. It fits builders who prioritize space savings and low noise over raw flow performance. The compact pump and reservoir design allow for installation in cases with limited internal volume. You get a complete cooling solution that maximizes space efficiency.
What type of bearing does this pump use?
This pump features a ceramic bearing. Ceramic bearings are known for their durability and smooth operation. They reduce friction and noise compared to traditional plastic or metal bearings. You benefit from a longer lifespan and quieter operation. The ceramic construction is a key part of the DC-LT design.