PCCOOLER DA240 ARGB AIO CPU Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This pccooler da240 argb aio CPU review looks at a 240mm liquid cooler designed for high-performance systems. It supports CPUs up to 260W TDP, handling Intel Core i9 and AMD Ryzen 9 processors. The unit features a 3000 RPM ceramic pump and dual 120mm ARGB fans. These fans spin between 500 and 1800 RPM to balance airflow and noise. You get broad socket support, including LGA1851 and AM5. The compact radiator fits most ATX and Micro-ATX cases. This setup aims for reliable everyday cooling with vibrant lighting effects.
What stands out
- 260W TDP thermal capacity for high-end CPUs
- 3000 RPM ceramic pump for smooth, durable operation
- Dual 120mm ARGB fans with up to 73.6 CFM airflow
- Supports LGA1851, LGA1700, LGA1200, LGA115X, LGA20XX, AM5, and AM4
- Quiet operation with pump noise at 28 dBA
Who it fits
Good fit for
This AIO suits builders with Intel Core i7/i9 or AMD Ryzen 7/9 processors who need strong cooling in a 240mm form factor. If you want ARGB lighting that syncs with your build, the included fans provide vibrant effects. The wide socket compatibility makes it a good choice for both new LGA1851 builds and older LGA115X or AM4 systems. It is ideal for users who value quiet operation and straightforward installation in standard ATX or Micro-ATX cases.
Who should skip it
You should look elsewhere if you need a larger cooling solution for extreme overclocking beyond 260W TDP. This 240mm radiator may struggle with sustained heavy loads on the most power-hungry chips. If you prefer a 360mm or 420mm setup for maximum thermal headroom, this unit is too small. Additionally, if you require non-ARGB lighting or a monochrome aesthetic, the built-in RGB effects might not match your case design preferences.
Verdict: The PCCOOLER DA240 offers solid 260W cooling performance with quiet ARGB fans for mainstream high-end builds. It is a practical choice for users seeking broad socket compatibility and stylish lighting in a compact package.
Key specs explained for this AIO
Thermal Capacity: 260W TDP
This rating indicates the cooler can handle processors drawing up to 260 watts of thermal energy. You benefit from stable performance when running high-end Intel Core i9 or AMD Ryzen 9 chips. This capacity suits heavy gaming, rendering, or multitasking workloads. When shopping, compare this against your CPU's maximum power draw to ensure the loop can dissipate the heat effectively without throttling.
Pump Speed: 3000 RPM
The pump circulates coolant at a fixed speed of 3000 revolutions per minute. This high speed ensures rapid heat transfer from the CPU block to the radiator. You gain consistent cooling performance regardless of system load. This is distinct from variable-speed pumps. When comparing models, a fixed high speed often means reliable peak cooling, though you should check the noise output to ensure it remains acceptable for your setup.
Fan Speed: 500–1800 RPM
The fans operate within a variable range from 500 to 1800 RPM. You can balance airflow and noise levels by adjusting this speed via PWM control. Lower speeds reduce acoustic output, while higher speeds increase cooling potential. This flexibility allows you to adapt to different thermal demands. When shopping, look for this range to find a cooler that offers both quiet idle operation and strong cooling under heavy load.
Radiator Size: 240mm
This cooler uses a 240mm radiator, typically consisting of two 120mm fans. This size offers a balance between cooling capacity and case compatibility. It fits in most standard ATX and Micro-ATX cases. You benefit from easier installation compared to larger 360mm or 420mm units. When comparing AIO options, consider your case's mounting points. A 240mm loop is often sufficient for high-TDP CPUs if airflow is managed well.
Socket Compatibility: LGA1851/1700/1200/115X/20XX, AM5/AM4
The mounting hardware supports a wide range of modern Intel and AMD sockets. You can install this on the latest LGA1851 platform or older LGA115X series. It also works with AMD AM5 and AM4 motherboards. This broad support means you do not need to buy separate brackets for different generations. When shopping, verify your specific motherboard socket type to ensure the included hardware matches your build platform for a straightforward installation.
Design and build details
The PCCOOLER DA240 ARGB features a white finish on its components. According to the listing, the radiator measures 9.45 inches in length, 4.72 inches in width, and 1.06 inches in height. This compact 240mm layout is designed to fit most ATX and Micro-ATX cases. The total weight of the unit is 2.87 pounds. This mass suggests sturdy construction for the tubing and pump block. The reinforced tubing adds durability to the sealed liquid loop. You do not need to worry about frequent flexing or damage during installation.
The pump cover includes standard ARGB lighting. This lighting type allows you to sync colors with other compatible components in your build. The dual 120mm fans are integrated into the radiator frame. They use PWM control for speed adjustments between 500 and 1800 RPM. This range lets you balance noise levels against cooling needs. The ceramic pump operates at 3000 RPM. This speed ensures rapid coolant circulation without excessive vibration. The hydro bearing fans contribute to smooth operation over time.
Broad socket compatibility is built into the mounting hardware. It supports Intel LGA1851, LGA1700, LGA1200, LGA115X, LGA20XX, and AMD AM5/AM4 platforms. This wide support means you can use this cooler for both new builds and older upgrades. The straightforward installation process suits users who want reliable cooling without complex custom loops. The design prioritizes function and aesthetic integration for modern gaming PCs.
Setup and everyday use
Installation begins with matching the mounting hardware to your specific motherboard socket. The DA240 supports a wide range of platforms, including the latest Intel LGA1851 and LGA1700, as well as older LGA1200 and LGA115X variants. For AMD users, it covers both AM5 and AM4 sockets. The radiator dimensions of 9.45 by 4.72 inches allow it to fit into most standard ATX and Micro-ATX cases without requiring unusual clearance. You should verify your case has enough space to mount the 240mm radiator effectively.
Once installed, the system relies on a 3000 RPM ceramic pump to circulate coolant. This pump speed is fixed, meaning you do not need to configure pump curves in your BIOS for basic operation. The pump is designed to operate quietly at 28 dBA, providing a silent baseline for heat transfer. The two 120mm fans handle the rest of the airflow. They are PWM-controlled, allowing your motherboard to adjust speeds between 500 and 1800 RPM based on thermal demand.
In daily use, the fans can reach up to 73.6 CFM airflow while maintaining noise levels as low as 33.8 dBA. This balance allows the cooler to dissipate heat from CPUs up to 260W TDP efficiently. The ARGB lighting adds visual appeal to the pump cover, syncing with other components if your motherboard supports it. The sealed loop and reinforced tubing require no maintenance, making it a set-and-forget solution for long-term reliability.
Before You Buy This AIO
You need to verify your case supports a 240mm radiator before purchasing. The listing states the unit fits most ATX and Micro-ATX cases, but you must check your specific chassis dimensions. Ensure your motherboard has an ARGB header to control the lighting effects on the pump cover and fans. If your board lacks this connector, you will need a separate controller or the lights will not function as intended. This cooler targets high-TDP processors, so pair it with a CPU that matches its 260W rating for best results. Regular maintenance involves keeping the radiator fins clean from dust to maintain airflow. Compare this model against other 240mm options if you prioritize lower noise levels or different socket support. It is a practical choice for users who want straightforward installation and reliable cooling without complex custom loop plumbing.
Check before you buy
- Confirm your case fits a 240mm radiator size.
- Check for an ARGB header on your motherboard.
- Verify your CPU TDP is under 260 watts.
- Ensure socket compatibility with your specific platform.
The product at a glance
PCCOOLER DA240 ARGB 240mm AIO
Best for: Standard ATX builds with 260W CPUs
- Radiator Size
- 240mm
- Socket Compatibility
- LGA1851/1700/1200/115X/20XX; AMD AM5/AM4
- Thermal Capacity
- 260W TDP
- Pump Speed
- 3000 RPM
- Fan Speed
- 500–1800 RPM
- Lighting Type
- ARGB
View on Amazon: PCCOOLER DA240 ARGB 240mm AIO Affiliate link
The PCCOOLER DA240 is a 240mm white AIO designed for CPUs up to 260W TDP. It uses a 3000 RPM ceramic pump and two 120mm PWM fans that reach 1800 RPM. The fans move 73.6 CFM of air while keeping noise low. It supports Intel LGA1851 and AMD AM5 sockets. This cooler suits users who want quiet operation and ARGB lighting in a compact build.
Pros
- 260W TDP thermal capacity for high-end processors
- 3000 RPM ceramic pump for reliable coolant circulation
- Low 28 dBA pump noise level
- Supports latest Intel LGA1851 and AMD AM5 sockets
Cons
- 240mm radiator size limits fit in small cases
- Fan speed range caps at 1800 RPM
- No software control mentioned for fan curves
Good fit if
- You need a white AIO for an AM5 or LGA1851 build
- You prioritize low pump noise under 30 dBA
- You want ARGB lighting without complex software
Skip if
- You require a 360mm radiator for extreme overclocking
- You need software control for custom fan curves
- You are building in a case with tight radiator clearance
Verdict: PCCOOLER DA240 White ARGB AIO fits users who need reliable cooling for 260W CPUs with minimal noise. It is a solid choice for standard ATX builds using modern Intel or AMD platforms.
Specifications side by side
| Spec | PCCOOLER DA240 ARGB 240mm AIO |
|---|---|
| Radiator Size | 240mm |
| Socket Compatibility | LGA1851/1700/1200/115X/20XX; AMD AM5/AM4 |
| Thermal Capacity | 260W TDP |
| Pump Speed | 3000 RPM |
| Fan Speed | 500–1800 RPM |
| Lighting Type | ARGB |
| Lighting | ARGB |
| Dimensions | 9.45 × 4.72 × 1.06 inches |
| Weight | 2.87 pounds |
| Size | 240mm AIO |
| Color | White |
| Model | DA240 |
Frequently asked questions
Is the PCCOOLER DA240 ARGB suitable for Intel Core i9 processors?
Yes, this AIO is designed to handle high-performance CPUs with up to 260W TDP. It effectively manages thermal loads from modern Intel Core i9 chips. The ceramic pump runs at 3000 RPM to maintain stable temperatures under heavy workloads.
What size is the radiator on the PCCOOLER DA240?
The radiator measures 9.45 inches in length, 4.72 inches in width, and 1.06 inches in height. This 240mm form factor is standard for dual 120mm fan setups. It fits most ATX and Micro-ATX cases, provided you check internal clearance.
Does the PCCOOLER DA240 support AMD Ryzen processors?
Yes, the mounting hardware supports AMD platforms. It covers various socket types for Ryzen CPUs. This ensures compatibility with high-end AMD Ryzen 9 processors that draw significant power, leveraging the 260W thermal capacity for efficient cooling.
How does the ARGB lighting work on this cooler?
The unit features ARGB lighting on the fans and pump head. You need an motherboard ARGB header to control the colors and effects. The white finish complements the lighting, creating a cohesive look for your build without requiring separate controllers.
Is the PCCOOLER DA240 compatible with LGA1700 sockets?
Yes, it supports the latest Intel LGA1700 socket. The package includes the necessary mounting hardware for this platform. It also covers older sockets like LGA1200 and LGA115X, making it a versatile choice for various Intel motherboard generations.
What is the weight of the PCCOOLER DA240 AIO?
The unit weighs 2.87 pounds. This includes the radiator, pump block, and tubing. The weight is manageable for standard mounting, but you should ensure your case can support the load without sagging or stressing the motherboard socket area.
Can this cooler handle 260W CPUs in a compact case?
It is rated for 260W TDP, so it handles high power draw well. However, you must verify your case supports a 240mm radiator. The compact 240mm layout fits many ATX cases, but internal space must accommodate the 9.45-inch length.