Thermalright Frozen Notte 240 Black Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This thermalright frozen notte 240 black review looks at a 240mm AIO cooler from Thermalright. It features a copper base and aluminum fins for heat transfer. The pump runs at 5300 RPM for consistent flow. Two 120mm fans provide up to 72.37 CFM of airflow. The unit supports ARGB lighting synced via 5V 3-pin headers. It fits Intel LGA 1700 and AMD AM5 sockets. The design emphasizes low noise and efficient cooling. You get a complete package with balanced fans included.
What stands out
- 240mm radiator size with black aluminum fins
- Pump speed up to 5300 RPM for rapid heat exchange
- Two 120mm fans delivering 72.37 CFM max airflow
- 5V 3-pin ARGB synchronization for fans and water block
- S-FDB bearings in fans to reduce vibration and chattering
Who it fits
Good fit for
You should consider this cooler if you need a compact 240mm solution for modern platforms like LGA 1700 or AM5. The high pump speed and balanced fans suit users who want efficient cooling without excessive noise. The included ARGB support helps those building themed PCs. It is ideal for cases that accommodate 240mm radiators. The straightforward installation hardware makes it accessible for standard builds.
Who should skip it
Skip this option if you require a 360mm radiator for extreme overclocking or high-TDP CPUs. The 240mm size limits heat dissipation capacity compared to larger units. If you need RGB lighting via software control rather than motherboard headers, this 5V 3-pin ARGB setup may not fit your motherboard. Users seeking silent operation below 27.7 dBA might find the max fan speed too loud. Check your case compatibility before purchasing.
Verdict: The Thermalright Frozen Notte 240 Black offers solid 240mm cooling performance with reliable pump speeds and included fans. It is a practical choice for standard LGA 1700 and AM5 builds.
Key specs explained
Radiator Size: 240mm
This size offers a balance between cooling capacity and case compatibility. You need a chassis with an interior width greater than 250mm to fit this unit. It provides more surface area for heat dissipation than a 120mm model. This makes it suitable for mid-tower cases. Check your case dimensions before purchasing to ensure the radiator mounts properly without obstructing other components.
Pump Speed: 5300 RPM ± 10%
The pump circulates coolant at this high speed to maintain consistent flow through the cold plate. This helps transfer heat away from the CPU efficiently. The ± 10% tolerance indicates manufacturing variance. Higher pump speeds generally improve thermal performance. This spec ensures the liquid moves quickly enough to prevent hotspots during sustained loads.
Fan Speed: 2000 RPM ± 10%
These fans spin at this rate to push air through the radiator fins. This speed balances airflow and noise levels. The tolerance allows for slight unit-to-unit differences. At this RPM, you get strong cooling performance. It is fast enough for most gaming or productivity tasks. You can adjust fan curves in your BIOS to tweak noise and cooling.
Lighting Type: ARGB
Addressable RGB lighting allows you to control each LED individually. You can create complex patterns and color effects via your motherboard software. This syncs with other ARGB components in your build. It enhances the visual appeal of your system. Ensure your motherboard has a 5V 3-pin header for proper connection and synchronization.
Socket Compatibility: AM4/AM5, LGA 1700
This cooler supports major modern CPU platforms. It includes brackets for Intel LGA 1700 and AMD AM5 sockets. It also supports older sockets like LGA 115x and AM4. This wide compatibility makes it a versatile choice for various builds. You do not need to buy separate mounting hardware for these platforms. Verify your specific socket type before installation.
Design And Build Quality
The unit features a full copper mirror plane base paired with a 240mm black aluminum fin cold plate. This combination aims to lower resistance while maintaining high cooling efficiency. The water block cover uses aluminum alloy and high-strength acrylic with mirror plating. According to the listing, this design targets long-term durability with a stated pump life of 40,000 hours. The pump speed reaches 5300 RPM to ensure consistent fluid movement across the cold plate.
The radiator measures 240mm in length, with a width and height of 4.72 inches. The tubing is described as high polymer woven protective pipe, which helps prevent kinking and extends the unit's lifespan. You will need a case with an interior width greater than 250mm to accommodate the radiator and fans. The total weight is listed at 3.53 ounces, which is light for an integrated loop. This low mass reduces stress on your motherboard socket during installation.
Two 120mm TL-E12B-S fans are included, each measuring 120x120x25mm. They use S-FDB bearings to reduce noise and chattering, especially in vertical mounting positions. The fans provide up to 72.37 CFM of airflow with a max static pressure of 2.87 mmH2O. Their speed adjusts via PWM based on CPU temperature. The entire system supports 5V 3-pin ARGB synchronization, allowing you to match the lighting effects of your motherboard components.
Setup And Daily Use Guide
Installation relies on a dual-platform metal black mounting system. This hardware supports Intel LGA 1150, 1151, 1155, 1156, 1200, 1700, 2011, and 2066 sockets. It also covers AMD AM2, AM2+, AM3, AM3+, FM1, FM2, FM2+, AM4, and AM5. You must ensure your chassis width exceeds 250mm to accommodate the 240mm radiator. The setup process involves securing the block to your CPU socket and attaching the radiator to the case. The fans connect via 4-pin PWM headers for speed control. The lighting uses a 5V 3-pin ARGB connection. You can synchronize the fan and pump head lighting with your motherboard. The system supports daisy-chaining, which helps if you have limited lighting headers on your board. The pump speed is fixed at 5300 RPM, ensuring consistent coolant flow without manual adjustment. The fans operate up to 2000 RPM. This speed provides up to 72.37 CFM of airflow while keeping noise at or below 27.7 dBA. The S-FDB bearings are designed to reduce chattering, especially if you mount the unit in a hoisted position. Daily use involves the fans automatically adjusting speed based on CPU temperature. You can manually adjust the ARGB colors if your motherboard software allows. The pump head is rated for 40,000 hours of operation. This specification suggests long-term reliability without frequent maintenance. The high-polymer woven pipes add durability to the tubing. You do not need to add coolant or check for leaks after initial installation. The system is sealed and ready for continuous operation. The balance between the copper base and aluminum fins aims to maintain efficiency over time.
Before You Buy This AIO
You need a case with an interior width greater than 250mm to fit this 240mm radiator. Verify your motherboard has a 5V 3-pin ARGB header. The pump and fans sync with this single connection. You must manage lighting chains carefully to avoid exhausting your available ports. This cooler supports LGA 1700 and AM5 sockets, covering modern platforms. It also includes legacy Intel and AMD mounts, but you should confirm your specific socket type. The pump speed reaches 5300 RPM, which ensures consistent coolant flow for long-term stability. You do not need additional software for basic operation, as the fans adjust via PWM. However, manual ARGB control requires motherboard software. Keep the area around the radiator clear for airflow. This unit sits firmly in the mid-range AIO category. It offers solid cooling for standard builds without the complexity of custom loops. Check your case compatibility and header availability before purchasing.
Check before you buy
- Ensure case width exceeds 250mm for radiator fitment
- Confirm motherboard has 5V 3-pin ARGB header
- Verify support for your specific CPU socket
- Check available ARGB ports for lighting chains
The product at a glance
Thermalright Frozen Notte 240 Black ARGB
Best for: ARGB-synced 240mm cooling on standard cases
- Radiator Size
- 240mm
- Socket Compatibility
- AM4, AM5, LGA 1700, LGA 1851
- Pump Speed
- 5300 RPM
- Fan Speed
- 2000 RPM
- Lighting Type
- ARGB
- Dimensions
- 0.98 × 4.72 × 4.72 inches
View on Amazon: Thermalright Frozen Notte 240 Black ARGB Affiliate link
This 240mm AIO cooler uses a copper base and aluminum fins for heat transfer. The pump runs up to 5300 RPM, while the two 120mm fans spin up to 2000 RPM. It supports ARGB lighting synchronized via 5V 3-pin headers. You get broad socket support for Intel and AMD platforms. The design aims for efficient cooling with manageable noise levels.
Pros
- Pump speed reaches 5300 RPM for active heat removal
- Fans deliver up to 72.37 CFM of airflow
- ARGB lighting syncs with 5V 3-pin motherboard headers
- S-FDB bearings reduce fan vibration during installation
Cons
- Fan noise reaches 27.7 dBA at maximum speed
- Requires chassis width greater than 250mm for installation
- Lighting control is manual without software integration
Good fit if
- You need a 240mm radiator for mid-tower cases
- You want ARGB effects synced to your motherboard
- You use AM5 or LGA 1700 CPU sockets
Skip if
- Your case width is less than 250mm
- You prefer silent operation below 25 dBA
- You require software-based lighting customization
Verdict: Thermalright Frozen Notte 240 Black suits builders who prioritize high pump speeds and ARGB synchronization for standard 240mm setups. It fits users with cases wide enough to accommodate the radiator and who prefer manual lighting control.
Specifications side by side
| Spec | Thermalright Frozen Notte 240 Black ARGB |
|---|---|
| Radiator Size | 240mm |
| Socket Compatibility | AM4, AM5, LGA 1700, LGA 1851 |
| Pump Speed | 5300 RPM |
| Fan Speed | 2000 RPM |
| Lighting Type | ARGB |
| Lighting | ARGB |
| Size | 240Mm |
| Dimensions | 0.98 × 4.72 × 4.72 inches |
| Weight | 3.53 ounces |
| Color | Black-240MM |
| Model | 11 |
Frequently asked questions
Does the Thermalright Frozen Notte 240 Black support modern CPU sockets?
Yes, this cooler supports AM4, AM5, and LGA 1700 sockets. The mounting hardware is designed for these specific platforms. You can install it on recent AMD and Intel motherboards without needing extra adapters. This ensures compatibility with current generation processors.
What are the physical dimensions of the radiator?
The radiator measures 4.72 inches in width and height, with a thickness of 0.98 inches. This compact profile fits standard 240mm setups. You must ensure your case has an interior width greater than 250mm to accommodate the unit properly.
How does the lighting work on this AIO?
It features addressable RGB lighting that syncs with motherboard software. You connect the single ARGB cable to a 5V 3-pin header on your motherboard. This allows you to control colors and effects directly from your system's BIOS or companion app.
Is this cooler suitable for standard PC cases?
Yes, it is best for standard cases with sufficient width. The 240mm size offers a balance of cooling capacity and fitment. You need to verify your chassis interior width exceeds 250mm. This ensures the radiator mounts securely without interfering with other components.
What is the pump speed for this model?
The pump runs at 5300 RPM for consistent coolant flow. This high speed helps maintain thermal performance under load. It works alongside two 120mm fans to dissipate heat efficiently. The combination ensures stable temperatures for your CPU during intensive tasks.
How much does the Thermalright Frozen Notte 240 Black weigh?
The unit weighs 3.53 ounces. This lightweight design reduces stress on your motherboard socket. It is easy to handle during installation. The low weight does not compromise the structural integrity of the copper base and aluminum fins.
Can I use this cooler with an AM5 processor?
Yes, it is fully compatible with the AM5 socket. The included mounting hardware supports this platform. You can install it directly onto your AMD motherboard. This makes it a practical choice for users upgrading to the latest AMD Ryzen processors.