Thermalright Frozen Notte 360 Black Review: Who It Fits and Who Should Skip It
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
In this thermalright frozen notte 360 black review, we look at a 360mm AIO designed for high airflow and synchronized lighting. The unit features a 360mm radiator and a pump rated for 5300 RPM. It includes three 120mm fans that spin up to 2000 RPM. These components work together to move air through the black aluminum fins. The cooler also supports 5V 3-pin ARGB for motherboard sync. You get a full copper base for direct heat transfer. This setup targets users who want strong cooling performance with visible lighting effects.
What stands out
- 360mm radiator with black aluminum fins for high surface area
- Pump speed of 5300 RPM for consistent coolant circulation
- Three 120mm fans reaching 2000 RPM with 2.87mmH2O max static pressure
- Full copper mirror plane base for efficient heat absorption
- 5V 3-pin ARGB sync for fans and pump head
Who it fits
Good fit for
This cooler suits builders with cases wide enough to fit a 360mm radiator. It is a good fit for Intel LGA 1700/1851 and AMD AM5 platforms. Users who want high airflow fans with low noise profiles will appreciate the 27.7dBA rating. The ARGB support helps those who want their lighting to match their motherboard. It is also suitable for users who prefer a black aesthetic for their build components.
Who should skip it
You should skip this option if your case cannot accommodate a 360mm radiator. The listed dimensions require a chassis width greater than 250mm. If you need a cooler for smaller ITX builds, this unit is too large. Users who do not want ARGB lighting will not benefit from the 5V 3-pin headers. It is also not ideal for those seeking a white aesthetic, as this specific model is black only.
Verdict: The Thermalright Frozen Notte 360 Black offers solid cooling specs for mid to high-end builds. It fits users who prioritize airflow and lighting sync over compact size.
Thermalright Frozen Notte Key Specs
Radiator Size: 360mm
This AIO uses a 360mm radiator, which means it requires three 120mm fans. You need a case with enough width to fit this size. Most cases need at least 250mm of clearance. This larger surface area helps dissipate heat more effectively than smaller 240mm units. It is ideal for high-end CPUs that generate significant thermal output under load.
Pump Speed: 5300 RPM ± 10%
The pump circulates coolant at up to 5300 RPM. This high speed ensures rapid heat transfer from the CPU to the radiator. The ±10% variance accounts for normal manufacturing tolerances. Faster circulation generally improves cooling performance for demanding workloads. You should verify your motherboard supports a 12V 3-pin connection for this specific pump interface.
Fan Speed: 2000 RPM ± 10%
The included fans reach speeds of 2000 RPM. This provides strong airflow to push air through the radiator fins. The ±10% variance is standard for fan specifications. Higher speeds increase cooling efficiency but also raise noise levels. These fans use PWM for automatic speed adjustment based on CPU temperature, balancing performance and acoustics.
Lighting Type: ARGB
The unit features Addressable RGB lighting for customizable color effects. You connect it via a 5V 3-pin header on your motherboard. This allows synchronization with other ARGB components in your build. The lighting can be controlled manually or through motherboard software. It adds visual appeal without impacting cooling performance. Ensure your motherboard has the correct 5V ARGB header for compatibility.
Socket Compatibility: AM4, AM5, LGA 1700/1851/1200/2011
This cooler supports a wide range of modern and older sockets. It fits AMD AM4 and AM5 platforms, as well as Intel LGA 1700, 1851, 1200, and 2011. This broad compatibility makes it suitable for various system builds. You do not need to check for specific bracket versions for these common sockets. It covers most current and previous-generation desktop processors effectively.
Design and Build Overview
The listing describes a full copper mirror plane base paired with a black aluminum fin cold plate. This material choice aims to balance heat absorption and dissipation. The radiator measures 397 by 120 by 27 millimeters. You need a case with at least 250 millimeters of width to fit this unit. The pump speed is rated at 5300 RPM. This high speed suggests the manufacturer prioritizes rapid heat transfer from the CPU to the coolant loop.
The unit includes three 120mm fans. Each fan spins up to 2000 RPM. The listing notes these fans use S-FDB bearings. This bearing type is intended to reduce vibration and noise, especially if you mount the fans in a horizontal position. The fans also provide 2.87 mmH2O of static pressure. This spec helps push air through the dense radiator fins effectively. The total weight is listed as 3.53 ounces for the core components, excluding the tubing and mounting hardware.
Lighting is handled via 5V 3-pin ARGB connectors. The pump and fans support synchronized lighting effects. You can connect these devices in series to save motherboard headers. The water tubes are described as high polymer woven protective pipes. They measure 450mm in length. This length offers flexibility for routing in mid-tower and full-tower cases. The finish is uniformly black, which suits dark-themed builds.
Setup and Everyday Use
Installing the Thermalright Frozen Notte 360 Black requires a case with at least 250mm of clearance for the 397mm radiator length. The mounting system uses dual platform metal buckles for Intel LGA 1700 and AMD AM5 sockets, which simplifies the physical attachment process. You must ensure your motherboard has the correct headers for the three separate connection types. The pump connects to a 12V 3-pin header, while the pump lighting and the three PWM fans each require their own ports. The fans use standard 4-pin PWM connectors for speed control based on CPU temperature. Lighting synchronization relies on a 5V 3-pin ARGB header on the motherboard. You can chain the ARGB connections to avoid using multiple motherboard ports. In daily use, the pump runs at 5300 RPM, and the fans adjust up to 2000 RPM. This setup allows the cooler to maintain low noise levels while providing strong airflow. The fans generate a maximum of 72.37 CFM with noise capped at 27.7 dBA. The S-FDB bearings in the fans help reduce vibration, which is useful if you mount the radiator in a hoisted position. The ARGB lighting creates a synchronized effect across the pump and fans. You can manually adjust the light colors. This configuration ensures that the cooler operates quietly during light tasks and ramps up when the CPU load increases.
Check Compatibility Before Buying
Before buying the Thermalright Frozen Notte 360 Black ARGB V2, verify your case supports a 397mm radiator length. You need at least 250mm of clearance width. Check your motherboard for available 5V 3-pin ARGB headers. This cooler synchronizes lighting across fans and the pump block via these specific ports. If your board lacks enough headers, you may need a separate controller. The pump runs at 5300 RPM, so ensure your case has adequate airflow to handle the heat dissipation from the black aluminum fins. The included TL-E12B-S V2 fans operate at up to 2000 RPM with a maximum noise level of 27.7 dBA. This makes it suitable for users who want quiet operation without sacrificing cooling performance. Regularly check tube connections for leaks during the first few weeks of use. This model fits well into builds that prioritize balanced airflow and synchronized aesthetics over extreme overclocking capabilities.
Check before you buy
- Verify case supports 397mm radiator length
- Confirm motherboard has 5V 3-pin ARGB headers
- Ensure adequate airflow for black aluminum fins
- Check socket compatibility for LGA 1700 or AM5
The product at a glance
Thermalright Frozen Notte 360 Black ARGB V2
Best for: Spacious cases needing high airflow and RGB sync
- Radiator Size
- 360mm
- Socket Compatibility
- AM4, AM5, LGA 1700, LGA 1851
- Pump Speed
- 5300 RPM
- Fan Speed
- 2000 RPM
- Lighting Type
- ARGB
- Dimensions
- 0.98 × 4.72 × 4.72 inches
View on Amazon: Thermalright Frozen Notte 360 Black ARGB V2 Affiliate link
The Thermalright Frozen Notte 360 Black ARGB is a 360mm AIO cooler designed for high airflow and visual synchronization. It features a pump speed of 5300 RPM and three TL-E12B-S V2 fans reaching 2000 RPM. The unit supports 5V 3-pin ARGB lighting on both the pump and fans. It includes full copper base construction and woven tubing. This cooler suits users with large cases who want strong cooling performance and addressable RGB effects.
Pros
- 360mm radiator with 3x 120mm fans for high surface area
- Pump speed reaches 5300 RPM for efficient heat transfer
- Fans provide 72.37 CFM max airflow with 2.87 mmH2O static pressure
- Full copper mirror plane base and aluminum fin cold plate
- ARGB lighting syncs via 5V 3-pin header on motherboard
Cons
- Pump uses a 3-pin 12V connector instead of standard 4-pin PWM
- Fan noise level reaches 27.7 dBA at maximum speed
- Requires case width greater than 250mm for installation
Good fit if
- You have a mid-tower or full-tower case with at least 250mm width
- You want full ARGB synchronization for fans and pump head
- You need a 360mm radiator for high-end CPU cooling
Skip if
- You have a small form factor case with limited width
- You prefer silent operation and cannot tolerate 27.7 dBA noise
- You only have 4-pin PWM headers available for pump control
Verdict: Thermalright Frozen Notte 360 Black ARGB is a solid choice for builders with spacious cases who prioritize high airflow and RGB lighting. It delivers strong cooling specs but requires careful case sizing and motherboard header planning.
Specifications side by side
| Spec | Thermalright Frozen Notte 360 Black ARGB V2 |
|---|---|
| Radiator Size | 360mm |
| Socket Compatibility | AM4, AM5, LGA 1700, LGA 1851 |
| Pump Speed | 5300 RPM |
| Fan Speed | 2000 RPM |
| Lighting Type | ARGB |
| Lighting | ARGB |
| Size | 360Mm |
| Dimensions | 0.98 × 4.72 × 4.72 inches |
| Weight | 3.53 ounces |
| Color | Black-360MM |
| Model | 1 |
Frequently asked questions
Does the Thermalright Frozen Notte 360 Black fit AM4 sockets?
Yes, it supports AM4. The product data lists AM4 and LGA 1700 as compatible sockets. This allows you to use the cooler on older AMD platforms alongside newer Intel systems. Check your specific motherboard bracket compatibility before installation to ensure a secure fit.
What size radiator does this AIO use?
It uses a 360mm radiator. The specifications confirm a 360mm size with three 120mm fans. You need a case that accommodates this length. The listed dimensions are 397mm in length, so verify your case has sufficient clearance for proper installation and airflow.
How do I sync the RGB lighting?
You need a 5V 3-pin ARGB header on your motherboard. The unit features ARGB lighting on the fans and pump block. Ensure your motherboard has an available header for synchronization. This setup allows you to control the lighting effects through your system software.
Is this cooler suitable for small form factor cases?
No, it is not suitable for small cases. The 360mm radiator requires significant space. You need at least 250mm of clearance width and 397mm of length. Spacious cases are recommended to accommodate these dimensions and ensure adequate airflow around the pump and radiator fins.
What is the maximum fan speed?
The fans spin up to 2000 RPM. This speed helps move air through the 360mm radiator efficiently. The pump is rated for 5300 RPM. These speeds provide strong cooling performance for high-end processors while maintaining reasonable noise levels during typical usage.
Does it include fans or are they sold separately?
It includes three 120mm fans. The product description lists the fans as part of the package. You do not need to purchase additional fans for the radiator. The fans are designed to work with the included ARGB lighting and pump block for a complete cooling solution.