Thermalright Frozen Notte 240 ARGB Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This thermalright thermalrlght frozen notte 240 review looks at a 240mm AIO cooler from Thermalright. The unit features a copper base cold head and two 120mm PWM fans. You get a pump speed of 5300 RPM and fan speeds up to 2000 RPM. The design includes ARGB lighting that syncs with motherboards. It uses a full copper mirror plane base for heat transfer. The fans offer 72.37 CFM of airflow. This setup targets users who want balanced performance with visual customization.
What stands out
- 240mm radiator with dual 120mm PWM fans
- Pump speed reaches 5300 RPM for efficient heat transfer
- Full copper mirror plane base with 0.1mm spacing
- ARGB lighting syncs via 5V 3-pin motherboard connection
- S-FDB V2 bearings reduce fan chattering in various mounts
Who it fits
Good fit for
You should consider this cooler if you have an Intel LGA 1700 or AMD AM5 socket. The 240mm radiator fits cases with widths over 250mm. Users who want ARGB effects without extra hubs will appreciate the daisy-chain capability. The balanced fan profile suits builds that need moderate airflow. It is a practical choice for standard desktop towers where space allows for a dual-fan setup.
Who should skip it
Skip this model if your case is too narrow for a 240mm radiator. The listed width requirement is over 250mm. You should also look elsewhere if you need a 360mm or 420mm radiator for high-end CPUs. The pump speed is fixed at 5300 RPM, so you cannot adjust it via software. If you prefer silent operation with lower fan speeds, this balanced fan may not meet your specific noise thresholds.
Verdict: The Thermalright Frozen Notte 240 ARGB is a spec-driven cooler with a high-speed pump and balanced fans. It fits well in standard cases that support 240mm radiators.
Key specs explained
Radiator Size: 240mm
This size uses two 120mm fans. It offers a balance between cooling capacity and case compatibility. You can fit it in most mid-tower cases. Larger radiators provide more surface area for heat dissipation. Smaller ones save space. This standard size is a practical choice for mainstream builds where airflow and clearance matter.
Pump Speed: 5300 RPM
The pump circulates coolant at this maximum rate. Higher speeds move heat away from the CPU faster. This helps maintain lower temperatures under load. You should expect more noise at peak speed. The pump ensures consistent flow through the cold plate. This speed supports efficient thermal transfer for high-performance processors.
Fan Speed: 2000 RPM
The fans move air through the radiator at this maximum speed. This airflow pushes heat away from the cold plate. Higher speeds increase cooling performance. You will notice more noise at this level. This speed is suitable for demanding tasks. It balances airflow with acoustic output for general use and gaming.
Lighting Type: ARGB
Addressable RGB allows individual control of each LED. You can create custom patterns and colors. The lighting syncs with motherboard software. This adds visual flair to your build. ARGB is more flexible than standard RGB. You can adjust effects without changing the entire color scheme. It enhances the aesthetic appeal of the system.
Socket Compatibility: AM4/AM5, LGA 1700
This cooler fits major AMD and Intel platforms. You can use it with Ryzen and Core processors. The mounting hardware supports these specific sockets. This broad compatibility simplifies installation. You do not need separate kits for different CPUs. It ensures a secure fit for efficient heat transfer. Check your motherboard socket before purchase.
Design and Build Details
The listing describes a cold head built with a high-quality copper bottom featuring 0.1mm spacing. An aluminum alloy cover sits atop a high-strength acrylic top plate. The surface undergoes mirror plating and reflection processes. This construction aims for a durable finish. The pump head is rated for 40,000 hours of operation. You get a pump speed of 5300 RPM. The fans are 120mm PWM units. They reach 2000 RPM. The noise level is listed at 27.7 dBA. Airflow hits 72.37 CFM. The fans use S-FDB V2 bearings. This bearing type addresses chattering issues during installation.
The radiator uses a 240mm specification black aluminum fin cold plate. The tubing is a high polymer woven protective pipe. The listing notes a recommended chassis width greater than 250mm. This constraint affects where you can mount the unit. The cooler supports Intel LGA 1150 through 1700 and AMD AM2 through AM5 sockets. You get dual platform full metal black buckles for installation. The ARGB lighting connects via a 5V 3-pin interface. You can synchronize the fan and head lighting. The listing states the lighting supports 1600W color effects. You can connect units in series. This helps if your motherboard has limited light slots. The design prioritizes compatibility and synchronized aesthetics.
Setup And Daily Use
Installation begins with mounting the cold head. The listing notes dual platform full metal black buckles for Intel and AMD sockets. You can attach it to LGA 1700, 115x, 2011, AM4, or AM5. Ensure your case width exceeds 250mm for clearance. The pump speed reaches 5300 RPM. This high speed aims for consistent heat transfer from the CPU to the radiator. The pump life is rated at 40,000 hours. You do not need to adjust the pump manually. It runs based on system settings.
The two included TL-E12B-S fans connect via 4-pin PWM headers. They adjust speed automatically based on CPU temperature. The maximum speed is 2000 RPM. This provides up to 72.37 CFM of airflow. The noise level stays at or below 27.7 dBA. The S-FDB V2 bearings help reduce chattering, especially if you mount the radiator in a horizontal position. This matters if your case design places fans on top.
Lighting uses 5V 3-pin ARGB. You connect the fans and the cold head to your motherboard. The system synchronizes the 1600W color effects. You can connect them in series if you lack enough headers. The lighting color adjusts manually through your software. Daily use involves these automated adjustments. The fans ramp up when the CPU gets hot. The pump runs at full speed. You get quiet operation during light tasks and stronger airflow when gaming or rendering. The woven protective pipes keep the tubing secure. No additional software is mentioned for fan control. Your motherboard handles the PWM curves.
Before You Buy This Cooler
Before you buy the Thermalright Frozen Notte 240 ARGB Liquid Cooler, verify your motherboard has a 5V 3-pin ARGB header. The listing states the fans and pump synchronize via this single connection. You may need extension cables if your case lacks sufficient headers, as the design supports daisy-chaining to avoid slot shortages. Check your case width carefully. The manufacturer recommends a width greater than 250mm for proper clearance. This 240mm radiator size fits most mid-tower cases, but larger units in this guide require more space. Maintenance is minimal. The pump claims a 40,000-hour lifespan, reducing frequent replacement concerns. Ensure your CPU socket matches the listed compatibility, including LGA 1700 and AM5. This cooler suits users prioritizing lighting sync and balanced airflow. It does not include software for advanced control, so you must manage lighting manually through your motherboard BIOS or utility. Compare this model against other 240mm options if you need higher static pressure for dense radiators.
Check before you buy
- Verify your motherboard has a 5V 3-pin ARGB header.
- Ensure your case width exceeds 250mm for clearance.
- Confirm your CPU socket is LGA 1700 or AM5.
- Check if you need ARGB extension cables for your case.
The product at a glance
Thermalright Frozen Notte 240 ARGB Liquid Cooler
Best for: Standard mid-tower builds with black components
- Radiator Size
- 240mm
- Socket Compatibility
- AM4, AM5, LGA 1700, LGA 1851
- Pump Speed
- 5300 RPM
- Fan Speed
- 2000 RPM
- Lighting Type
- ARGB
- Dimensions
- 4.72 × 0.98 × 4.72 inches
View on Amazon: Thermalright Frozen Notte 240 ARGB Liquid Cooler Affiliate link
The Thermalright Frozen Notte 240 ARGB is a black all-in-one liquid cooler with a 240mm radiator. It features a pump speed of 5300 RPM and two TL-E12B-S fans rated at 2000 RPM with 2.87 mmH2O static pressure. The unit supports 5V 3-pin ARGB synchronization across fans and the water block. It fits Intel LGA 1700 and AMD AM5 sockets, making it a solid option for standard mid-tower builds.
Pros
- High pump speed of 5300 RPM for efficient heat transfer
- Fans deliver 72.37 CFM airflow with 2.87 mmH2O static pressure
- S-FDB V2 bearings reduce noise and vibration during operation
- Full copper base with 0.1mm micro-fin spacing for better contact
- ARGB lighting syncs between fans and pump head via 5V 3-pin
Cons
- Fan noise reaches 27.7 dBA at maximum speed
- Requires chassis width greater than 250mm for installation
- Limited to 5V 3-pin ARGB, not compatible with 12V 4-pin headers
Good fit if
- You need a black aesthetic for your build components
- You have a case with sufficient width for a 240mm radiator
- You want synchronized ARGB lighting without extra hubs
Skip if
- You require a 360mm radiator for extreme cooling
- Your motherboard only supports 12V 4-pin ARGB
- You prioritize silent operation under heavy loads
Verdict: The Thermalright Frozen Notte 240 ARGB delivers strong cooling performance through its high-speed pump and efficient fan design. It is a practical choice for builders who prioritize a black color scheme and reliable socket support for modern platforms.
Specifications side by side
| Spec | Thermalright Frozen Notte 240 ARGB Liquid Cooler |
|---|---|
| Radiator Size | 240mm |
| Socket Compatibility | AM4, AM5, LGA 1700, LGA 1851 |
| Pump Speed | 5300 RPM |
| Fan Speed | 2000 RPM |
| Lighting Type | ARGB |
| Lighting | ARGB |
| Dimensions | 4.72 × 0.98 × 4.72 inches |
| Color | FN240 BLACK ARGB |
Frequently asked questions
Does the Thermalright Frozen Notte 240 support modern AMD sockets?
Yes, it supports AM4 and AM5 platforms. The listing confirms compatibility with these specific AMD socket types. This ensures you can mount the cooler on current Ryzen processors without needing additional adapters or checking for older bracket requirements.
What Intel sockets are compatible with this AIO?
The cooler supports LGA 1700 for Intel processors. You can install it on 12th, 13th, and 14th Gen Intel CPUs. The mounting hardware is designed to secure the cold head firmly to this specific socket interface for stable thermal contact.
How thick is the radiator on this 240mm cooler?
The radiator thickness is 0.98 inches. This standard dimension allows it to fit within most mid-tower computer cases. You should verify your case specifications to ensure there is adequate space for this thickness along with the attached fans.
Is the color scheme suitable for black PC builds?
Yes, the unit features a black color scheme. The listing specifies the model as FN240 BLACK ARGB. This makes it a practical choice for builders who want consistent black components throughout their system without mixing in white or silver accents.
What lighting type does this cooler use?
It uses ARGB lighting for customizable effects. You can sync the lights with compatible motherboard software via a 5V 3-pin header. This allows you to adjust colors and patterns to match the rest of your build aesthetic.
What is the maximum fan speed for this model?
The fans can reach speeds up to 2000 RPM. This high speed helps move more air through the radiator for better cooling performance. You can adjust this speed via your motherboard BIOS to balance airflow and noise levels.