6 Best Alternatives to the Bykski Distro Plate Cougar Blazer (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The Bykski Distro Plate Cougar Blazer simplifies custom loop routing by integrating a DDC pump and 5V RGB lighting into a single acrylic unit. It is engineered specifically for Cougar Blazer cases, ensuring clean parallel lines and minimal tubing runs. If you are searching for bykski distro plate cougar blazer alternatives, you likely need a manifold for a different chassis or a specific size constraint. This product’s fixed dimensions and case-specific mounting hardware limit its use to that single enclosure.
The 6 alternatives listed here share key specifications with the original, such as DDC pump compatibility and 5V addressable RGB support. Each option is designed for a different case model, offering similar streamlined liquid routing but with varied physical dimensions. You might choose a different alternative if your build requires a wider or narrower plate, or if you are using a case other than the Cougar Blazer. All these products maintain the 30mm radiator thickness limit and include integrated pumping solutions for organized builds.
Our top pick: Bykski Cougar Blazer Distro Plate with DDC Pump.
Comparing Case-Specific Alternatives
Bykski O11 Dynamic XL Distro Plate with DDC Pump
The Bykski O11 Dynamic XL Distro Plate shares the same DDC pump integration and 5V RGB lighting as the Cougar Blazer model, but it is built exclusively for LIAN LI O11 Dynamic XL enclosures. It measures 16.7 inches in length and 5.67 inches wide, making it slightly larger than the 14.2-inch Cougar Blazer unit. Both plates support radiators up to 30mm thick and weigh 10 pounds. You should choose this alternative if your build uses an O11 Dynamic XL case, as the Cougar Blazer plate will not fit. The physical dimensions differ enough that swap compatibility is not possible between these two specific chassis models.
Bykski InWin 925 Distro Plate with DDC Pump
The Bykski InWin 925 Distro Plate offers the same integrated DDC pump with armor and addressable RGB features found in the Cougar Blazer version. It is designed specifically for InWin 925 cases. This unit measures 14.9 inches long and 5.24 inches wide, which is slightly wider and longer than the Cougar Blazer plate. Like the original, it accommodates radiators up to 30mm thick and weighs 10 pounds. This alternative is the correct choice if you are building within an InWin 925 chassis. The Cougar Blazer plate lacks the necessary mounting geometry for this case, so you must select the InWin-specific model to ensure proper fit and clean tubing routing.
Bykski Phanteks Evolv Shift X Distro Plate
The Bykski Phanteks Evolv Shift X Distro Plate provides 5V addressable RGB lighting and DDC pump compatibility similar to the Cougar Blazer model. It is tailored for Phanteks 217XE cases. This plate is shorter at 12 inches long but wider at 6.1 inches, compared to the Cougar Blazer's 14.2-inch length and 4.13-inch width. It maintains the 30mm radiator thickness limit and the 10-pound weight. You should pick this alternative if your build is housed in a Phanteks Evolv Shift X case. The Cougar Blazer plate will not mount correctly here, so this specific geometry is required for a clean loop layout in that chassis.
Bykski Lian Li O11 Distro Plate with RGB
The Bykski Lian Li O11 Distro Plate delivers dedicated routing and DDC pump integration for dual-radiator Lian Li O11 builds. It features 5V RGB lighting and a frosted acrylic finish, whereas the Cougar Blazer model is transparent. This unit measures 13.5 inches long and 5.22 inches wide, differing from the Cougar Blazer's 14.2-inch length and 4.13-inch width. It also supports radiators up to 30mm thick and weighs 10 pounds. Choose this alternative if you are using a dual-radiator Lian Li O11 setup. The Cougar Blazer plate is incompatible with this case, making this specific model necessary for proper installation and loop organization.
Bykski TT Level 20 XT Distro Plate with RGB
The Bykski TT Level 20 XT Acrylic Distro Plate integrates 5V lighting and DDC pump support for Thermaltake Level 20 XT chassis. It features a transparent finish like the Cougar Blazer plate. This unit is significantly wider at 7.93 inches and shorter at 13.8 inches long, compared to the Cougar Blazer's 4.13-inch width and 14.2-inch length. It maintains the 30mm radiator limit and 10-pound weight. You should select this alternative if your build is in a Thermaltake Level 20 XT case. The Cougar Blazer plate lacks the specific mounting points for this chassis, so this wider, shorter design is required for a proper fit.
Bykski Lian Li Ghost Axe Distro Plate with DDC Pump
The Bykski Lian Li Ghost Axe Distro Plate with DDC Pump streamlines loop routing for Ghost Axe cases. It includes integrated pumping and RGB lighting similar to the Cougar Blazer model. This plate measures 11.6 inches long and 4.96 inches wide, making it shorter and slightly wider than the Cougar Blazer's 14.2-inch length and 4.13-inch width. It supports radiators up to 30mm thick and weighs 10 pounds. Pick this alternative if you are building in a Lian Li Ghost Axe case. The Cougar Blazer plate will not fit this chassis, so this specific geometry is essential for clean tubing runs and proper installation.
Quick picks
Our 7 picks
Bykski Cougar Blazer Distro Plate with DDC Pump
Best for: Cougar Blazer custom liquid-cooling builds
- Lighting
- 5v Addressable RGB
- Material
- Acrylic (PMMA)
- Pump Compatibility
- DDC
- Dimensions
- 14.2 × 4.13 × 1.32 inches
- Weight
- 10 pounds
View on Amazon: Bykski Cougar Blazer Distro Plate with DDC Pump
This PMMA acrylic distribution plate is engineered specifically for the Cougar Blazer case to route custom liquid-cooling loops. It measures 14.2 inches long and includes an integrated DDC pump with an armor heatsink, alongside an integrated 5-volt addressable RGB LED strip. It suits you if you want a dedicated reservoir and pump unit that mounts directly into your chassis without complex tubing runs, while keeping your radiator thickness within 30 millimeters.
Pros
- Includes an integrated DDC pump with armor heatsink
- Built from clear PMMA acrylic with integrated 5V addressable RGB lighting
- Pre-assembled unit includes mounting hardware
- Designed specifically for direct mounting in the Cougar Blazer chassis
Cons
- Limits installed radiator thickness to 30 millimeters maximum
- Restricted to the Cougar Blazer chassis; not recommended for other cases
- Weighs 10 pounds
Good fit if
- You build a custom liquid loop inside a Cougar Blazer case.
- You want an included DDC pump and 5V addressable RGB lighting in one assembly.
- You plan to use radiators that do not exceed 30 millimeters in thickness.
Skip if
- You use any computer chassis other than the Cougar Blazer.
- You plan to install radiators thicker than 30 millimeters.
Verdict: Bykski Cougar Blazer Distro Plate with DDC Pump provides a dedicated acrylic reservoir and pump combination built solely for Cougar Blazer enclosures. It cleanly routes your cooling loop as long as your radiators do not exceed 30 millimeters in thickness.
Bykski O11 Dynamic XL Distro Plate with DDC Pump
Best for: LIAN LI O11 Dynamic XL custom loops
- Lighting
- 5v Addressable RGB
- Material
- PMMA
- Pump Compatibility
- DDC
- Dimensions
- 16.7 × 5.67 × 1.32 inches
- Weight
- 10 pounds
View on Amazon: Bykski O11 Dynamic XL Distro Plate with DDC Pump
This Bykski distribution plate serves as a dedicated liquid cooling reservoir and routing hub built exclusively for the LIAN LI O11 Dynamic XL chassis. It features an integrated DDC pump with an armor heatsink, clear PMMA acrylic construction, and an integrated 5V addressable RGB LED strip. It suits you if you want organized, parallel tubing lines in an O11 Dynamic XL build without sourcing a separate standalone pump.
Pros
- Includes an integrated DDC pump with an armor heatsink
- Pre-assembled clear PMMA acrylic construction with mounting hardware
- Integrated 5V addressable RGB LED strip
- Designed for parallel tubing runs in the LIAN LI O11 Dynamic XL
Cons
- Compatible only with the LIAN LI O11 Dynamic XL chassis
- Radiator thickness cannot exceed 30mm
Good fit if
- You build inside a LIAN LI O11 Dynamic XL case.
- You want an integrated DDC pump unit attached directly to the reservoir.
- You use radiators measuring 30mm thick or less.
Skip if
- You plan to use any case other than the LIAN LI O11 Dynamic XL.
- You intend to install radiators thicker than 30mm.
Verdict: Bykski O11 Dynamic XL Distro Plate with DDC Pump streamlines custom loop routing specifically for O11 Dynamic XL enclosures while supplying its own DDC pump and 5V addressable lighting. It remains restricted to slim 30mm radiators and this single case model.
Bykski InWin 925 Distro Plate with DDC Pump
Best for: InWin 925 builds requiring integrated DDC pumps
- Lighting
- 5v Addressable RGB
- Material
- PMMA
- Pump Compatibility
- DDC
- Dimensions
- 14.9 × 5.24 × 1.32 inches
- Weight
- 10 pounds
This Bykski distribution plate replaces standard reservoirs in your InWin 925 custom liquid loop. Built from acrylic PMMA, it includes an integrated DDC pump with an armor heatsink and a 5V addressable RGB LED strip. The unit measures 14.9 inches long and restricts connected radiator thickness to 30mm. It suits you if you want a dedicated, case-matched water distribution manifold that powers your entire loop directly.
Pros
- Includes integrated DDC pump with armor heatsink
- Built-in 5V addressable RGB lighting strip
- Full PMMA acrylic body pre-assembled with mounting hardware
- Engineered for direct fit in the InWin 925 chassis
Cons
- Limits radiator thickness to a maximum of 30mm
- Not recommended for use in cases other than the InWin 925
- Total assembly weight is 10 pounds
Good fit if
- You build a custom liquid cooling loop inside an InWin 925 case.
- You want an included DDC pump with an armor heatsink.
- You use radiators that do not exceed 30mm in thickness.
Skip if
- You use a computer chassis other than the InWin 925.
- You plan to install radiators thicker than 30mm.
- You already own a separate standalone pump.
Verdict: Bykski InWin 925 Distro Plate with DDC Pump provides a dedicated acrylic manifold with an integrated armored pump and addressable lighting. It routes your liquid lines cleanly provided your hardware stays within the 30mm radiator limit.
Bykski Phanteks Evolv Shift X Distro Plate
Best for: Phanteks Evolv Shift X DDC liquid loops
- Lighting
- 5v Addressable RGB
- Material
- PMMA
- Pump Compatibility
- DDC
- Dimensions
- 12 × 6.1 × 1.24 inches
- Weight
- 10 pounds
This PMMA acrylic distribution plate mounts inside the Phanteks Enthoo Evolv Shift X chassis to streamline custom cooling loops. Measuring 12 by 6.1 by 1.24 inches, it includes a 5V addressable RGB LED strip and integrates DDC pump mounting. It suits you if you build a custom loop in the Phanteks 217XE case and need organized tube runs within 30mm radiator clearance.
Pros
- Clear PMMA acrylic construction fitted for the Phanteks 217XE case
- Integrated 5V addressable RGB lighting strip
- Native mounting support for DDC pumps with heatsink armor
- Comes pre-assembled with installation mounting hardware included
Cons
- Restricted strictly to the Phanteks 217XE chassis
- Limits installed radiator thickness to 30mm maximum
- Supports DDC pump formats only
Good fit if
- You use a Phanteks Enthoo Evolv Shift X or 217XE computer chassis.
- You plan to run a DDC pump directly on your distribution plate.
- You use radiators that are 30mm thick or slimmer.
Skip if
- You build inside any PC case other than the Phanteks 217XE.
- You require radiators thicker than 30mm in your cooling loop.
- You intend to use a D5 pump rather than a DDC pump.
Verdict: Bykski Phanteks Evolv Shift X Distro Plate provides a dedicated liquid routing reservoir with 5V addressable RGB lighting for Phanteks 217XE cases. Its 30mm maximum radiator allowance and DDC pump integration keep loop layouts neat within the chassis boundaries.
Bykski Lian Li O11 Distro Plate with RGB
Best for: dual-radiator Lian Li O11 custom loops
- Lighting
- 5v Addressable RGB
- Material
- Acrylic (PMMA)
- Pump Compatibility
- DDC
- Dimensions
- 13.5 × 5.22 × 1.32 inches
- Weight
- 10 pounds
This Bykski PMMA distribution plate fits the Lian Li O11 chassis and supports double 360mm radiators up to 30mm thick. It features an integrated 5V addressable RGB strip and mounts an inline DDC pump with armor heatsink. If you plan a dual-radiator custom liquid loop in an O11 case, this unit replaces separate reservoirs and routes your tubing cleanly.
Pros
- Supports dual 360mm radiators up to 30mm thick
- Integrated 5V addressable RGB lighting strip
- Full PMMA acrylic body with frosted finish
- Designed for inline DDC pump mounting
Cons
- Restricted to radiators 30mm thick or thinner
- Compatible only with the Lian Li O11 case
- Weight is 10 pounds dry
Good fit if
- You build a custom loop inside a standard Lian Li O11 chassis.
- You use up to two 360mm radiators that do not exceed 30mm in thickness.
- You plan to integrate an inline DDC pump directly into the distro plate.
Skip if
- You use radiators thicker than 30mm.
- You build inside a different chassis than the standard Lian Li O11.
Verdict: Bykski Lian Li O11 Dual 360 Distro Plate provides dedicated routing and DDC pump integration for dual-radiator Lian Li O11 builds. It delivers clean tube geometry as long as your radiators measure 30mm thick or less.
Bykski TT Level 20 XT Distro Plate with RGB
Best for: TT Level 20 XT liquid cooling builds
- Lighting
- 5v Addressable RGB
- Material
- Acrylic (PMMA)
- Pump Compatibility
- DDC
- Dimensions
- 13.8 × 7.93 × 1.32 inches
- Weight
- 10 pounds
This Bykski distribution plate serves as a custom loop reservoir for the TT Level 20 XT computer case. Constructed from transparent PMMA acrylic, the unit includes 5V addressable RGB lighting and mounting support for an inline DDC pump. It organizes loop routing into parallel lines to minimize tubing runs. This setup fits you if you want an integrated reservoir and pump platform for a TT Level 20 XT liquid cooling build.
Pros
- Built specifically for the TT Level 20 XT computer case
- Integrated 5V addressable RGB (RBW) LED strip
- Supports inline DDC pump installation with heatsink armor
- Constructed from transparent PMMA acrylic
Cons
- Installed radiator thickness cannot exceed 30mm
- Not recommended for use in cases other than the TT Level 20 XT
Good fit if
- You assemble a custom cooling loop in a TT Level 20 XT case.
- You plan to integrate an inline DDC pump directly into the distro plate.
- You use radiators with a thickness of 30mm or less.
Skip if
- You use computer cases other than the TT Level 20 XT.
- You plan to run radiators thicker than 30mm in your loop.
Verdict: Bykski TT Level 20 XT Acrylic Distro Plate delivers dedicated liquid routing and integrated 5V lighting for the TT Level 20 XT chassis. It keeps your loop organized as long as your radiators do not exceed 30mm in thickness.
Bykski Lian Li Ghost Axe Distro Plate with DDC Pump
Best for: Lian Li Ghost Axe custom loop builds
- Lighting
- 5v Addressable RGB (RBW)
- Material
- PMMA (Acrylic)
- Pump Compatibility
- DDC
- Dimensions
- 11.6 × 4.96 × 1.32 inches
- Weight
- 10 pounds
View on Amazon: Bykski Lian Li Ghost Axe Distro Plate with DDC Pump
This acrylic distribution plate replaces standard reservoirs in your Lian Li Ghost Axe case. It integrates an inline DDC pump with armor heatsink and 5v addressable RGB lighting directly into the PMMA body. You get dedicated routing for clean, parallel tubing runs without separate pump brackets. It suits your build if you run radiators 30mm thick or less inside this specific chassis.
Pros
- Includes DDC pump with armor heatsink
- Integrated 5v addressable RGB LED strip
- Full PMMA acrylic body with mounting hardware included
- Pre-routed channels enable parallel tubing runs
Cons
- Designed only for the Lian Li Ghost Axe chassis
- Restricts radiator thickness to 30mm maximum
- Heavy total weight of 10 pounds
Good fit if
- You build a custom cooling loop in a Lian Li Ghost Axe case.
- You run radiators that are 30mm thick or thinner.
- You want an all-in-one DDC pump and reservoir unit.
Skip if
- You use any computer case other than the Lian Li Ghost Axe.
- You require radiators thicker than 30mm.
- You plan to run a D5 pump setup instead of DDC.
Verdict: Bykski Lian Li Ghost Axe Distro Plate with DDC Pump streamlines loop routing and delivers integrated pumping specifically for the Ghost Axe case. It keeps your tubing orderly provided your radiators do not exceed the 30mm limit.
Specifications side by side
| Spec | Bykski Cougar Blazer Distro Plate with DDC Pump | Bykski O11 Dynamic XL Distro Plate with DDC Pump | Bykski InWin 925 Distro Plate with DDC Pump | Bykski Phanteks Evolv Shift X Distro Plate | Bykski Lian Li O11 Distro Plate with RGB | Bykski TT Level 20 XT Distro Plate with RGB | Bykski Lian Li Ghost Axe Distro Plate with DDC Pump |
|---|---|---|---|---|---|---|---|
| Lighting | 5v Addressable RGB | 5v Addressable RGB | 5v Addressable RGB | 5v Addressable RGB | 5v Addressable RGB | 5v Addressable RGB | 5v Addressable RGB (RBW) |
| Material | Acrylic (PMMA) | PMMA | PMMA | PMMA | Acrylic (PMMA) | Acrylic (PMMA) | PMMA (Acrylic) |
| Pump Compatibility | DDC | DDC | DDC | DDC | DDC | DDC | DDC |
| Dimensions | 14.2 × 4.13 × 1.32 inches | 16.7 × 5.67 × 1.32 inches | 14.9 × 5.24 × 1.32 inches | 12 × 6.1 × 1.24 inches | 13.5 × 5.22 × 1.32 inches | 13.8 × 7.93 × 1.32 inches | 11.6 × 4.96 × 1.32 inches |
| Weight | 10 pounds | 10 pounds | 10 pounds | 10 pounds | 10 pounds | 10 pounds | 10 pounds |
| Size | DDC Pump With Armor | DDC Pump With Armor | DDC Pump With Armor | DDC Pump With Armor | DDC Pump With Armor | DDC Pump With Armor | DDC Pump With Armor |
| Color | not specified | not specified | not specified | Transparent | Frosted | Transparent | not specified |
Frequently asked questions
Can I use these distro plates with thick radiators?
No. All listed models restrict you to radiators that are 30 millimeters thick or less. This limit ensures the tubing and fittings align correctly with the integrated pump and reservoir geometry. You must verify your radiator thickness before purchasing to avoid fitting issues.
Do these plates include a pump?
Yes. Every option in this list integrates a DDC pump directly into the acrylic manifold. You get a dedicated reservoir and pump combination in a single unit, which simplifies your build by reducing the number of separate components you need to mount.
Are these plates compatible with any case?
No. Each plate is engineered for a specific case model. You must match the plate to your chassis, such as the Cougar Blazer, O11 Dynamic XL, InWin 925, or Phanteks Evolv Shift X. Using the wrong plate will not fit your enclosure.
What kind of lighting do these use?
They all feature 5V addressable RGB lighting. This allows you to sync the colors with your motherboard or lighting controller for a unified aesthetic. The lighting is built into the acrylic body, providing illumination for the fluid and internal components.
Which plate is best for dual radiators?
The Bykski Lian Li O11 Dual 360 Distro Plate is designed for dual-radiator setups. It provides dedicated routing and DDC pump integration specifically for builds using two radiators in a Lian Li O11 case. This keeps tube geometry clean for larger cooling loops.
What is the color of the Bykski Phanteks Evolv Shift X plate?
It is transparent. This clear acrylic finish lets you see the fluid level and the pump impeller clearly. The transparent design complements the internal components of the Phanteks 217XE case while maintaining a clean look for your custom liquid cooling loop.
How heavy are these distro plates?
Each listed model weighs 10 pounds. This weight comes from the acrylic body and the integrated DDC pump with armor. You must ensure your case mounting points can support this load securely to prevent stress on the tubing or fittings over time.
Can I use these with an D5 pump?
No. All the listed alternatives are built specifically for DDC pumps. The manifold geometry and mounting points are designed to fit the DDC form factor. You cannot install a D5 pump in these units without significant modification or custom fabrication.