Bykski Phanteks 719LTG Distro Plate Alternatives: 6 Similar Picks Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The Bykski Phanteks 719LTG Distro Plate with DDC Pump offers a specialized, case-specific solution for builders using the Phanteks 719LTG chassis. It integrates a DDC pump with an armor heatsink and 5V addressable RGB lighting into a single PMMA unit. This setup simplifies loop layout by providing a dedicated centerpiece with minimal tubing runs. If you are searching for bykski distro plate phanteks 719ltg alternatives, you might want different dimensions or pump configurations. The original plate measures 17.8 inches in length and weighs 8 pounds. Some builders may prefer a shorter footprint or a different material finish.
We selected 6 similar picks because their specifications overlap with this original product. All alternatives in this list also support DDC pumps and include RGB lighting. However, they are designed for different chassis, such as the InWin 925 or Lian Li O11. These options provide comparable inline pump solutions with varying widths and lengths. You can compare the physical dimensions and weight to find the best fit for your specific build constraints. Each pick maintains the same core functionality while adapting to different case geometries.
How alternatives compare to the original
Bykski O11 Dynamic XL Distro Plate with DDC Pump
This Bykski plate is designed for the O11 Dynamic XL, not the 719LTG. It shares the same DDC pump and RGB lighting approach as the original. The dimensions differ slightly, measuring 5.67 inches wide and 16.7 inches long. It weighs 10 pounds, which is heavier than the 8-pound original. You get a similar integrated pump setup, but the fit is exclusive to the O11 Dynamic XL chassis. If you own that case, this offers the same clean inline pump solution. It does not fit the 719LTG. Choose this if your case matches its design. It provides comparable visual appeal and pump performance within its specific chassis constraints.
Bykski InWin 925 Distro Plate with DDC Pump
The Bykski InWin 925 plate targets a different case entirely. It includes a DDC pump with an armor heatsink and RGB lighting, matching the original's core features. Its dimensions are 5.24 inches wide and 14.9 inches long. It weighs 10 pounds, making it heavier than the original. The height remains consistent at 1.32 inches. This unit is not compatible with the 719LTG. It serves builders using the InWin 925 who want a pre-assembled inline pump. You receive the same lighting and pumping capabilities but in a form factor tailored to a different chassis. Select this option only if your case supports its specific mounting pattern and dimensions.
Bykski Phanteks Evolv Shift X Distro Plate
This Bykski plate is intended for the Phanteks Evolv Shift X, not the 719LTG. It features a DDC pump with RGB lighting, similar to the original. The dimensions are 6.1 inches wide and 12 inches long. It weighs 10 pounds, which is heavier than the original. The height is 1.24 inches, slightly lower than the original. This unit lacks compatibility with the 719LTG case. It offers a transparent PMMA design with an integrated pump solution. You get the same lighting and pumping performance but for a different chassis. Choose this if you own the Evolv Shift X. It provides a clean, case-specific look without requiring separate pump reservoir assembly.
Bykski Cougar Blazer Distro Plate with DDC Pump
The Bykski Cougar Blazer plate is designed for the Cougar Blazer case. It includes a DDC pump with RGB lighting, matching the original's features. The dimensions are 4.13 inches wide and 14.2 inches long. It weighs 10 pounds, making it heavier than the original. The height is 1.32 inches, identical to the original. This unit is not compatible with the 719LTG. It provides a specialized inline pump solution for its specific chassis. You receive the same lighting and pumping capabilities but in a narrower form factor. Select this option if your case matches its design. It offers a compact, integrated look without the need for separate components.
Bykski Lian Li O11 Distro Plate with RGB
This Bykski plate is built for the Lian Li O11 case. It features a DDC pump with RGB lighting, similar to the original. The dimensions are 5.22 inches wide and 13.5 inches long. It weighs 10 pounds, which is heavier than the original. The height is 1.32 inches, matching the original. This unit has a frosted acrylic finish, differing from the original's transparent design. It is not compatible with the 719LTG. It offers a pre-assembled inline pump solution for its specific chassis. You get comparable lighting and pumping performance but in a different visual style. Choose this if you own the Lian Li O11. It provides a clean, integrated loop center.
Bykski TT Level 20 XT Distro Plate with RGB
The Bykski TT Level 20 XT plate is designed for the Thermaltake Level 20 XT case. It includes a DDC pump with RGB lighting, matching the original's features. The dimensions are 7.93 inches wide and 13.8 inches long. It weighs 10 pounds, making it heavier than the original. The height is 1.32 inches, identical to the original. This unit is not compatible with the 719LTG. It offers a transparent PMMA design with an integrated pump solution. You receive the same lighting and pumping capabilities but in a wider form factor. Select this option if your case matches its design. It provides a case-specific look without requiring separate pump reservoir assembly.
Quick picks
Our 7 picks
Bykski Phanteks 719LTG Distro Plate with DDC Pump
Best for: Phanteks 719LTG custom loop builds
- Lighting
- 5v Addressable RGB
- Material
- Acrylic (PMMA)
- Pump Compatibility
- DDC
- Dimensions
- 17.8 × 5.39 × 1.32 inches
- Weight
- 8 pounds
View on Amazon: Bykski Phanteks 719LTG Distro Plate with DDC Pump
This distribution plate replaces conventional reservoirs in your Phanteks 719LTG chassis. Built from PMMA acrylic, the unit includes an integrated DDC pump with an armor heatsink and a 5v addressable RGB lighting strip. It measures 17.8 inches long and limits radiator thickness to 30mm. You will find it fits custom loop builders seeking clean parallel tubing runs.
Pros
- Includes an integrated DDC pump with armor heatsink
- Built-in 5v addressable RGB LED lighting strip
- Pre-assembled PMMA acrylic construction with mounting hardware
Cons
- Restricted specifically to the Phanteks 719LTG chassis
- Limits installed radiator thickness to 30mm maximum
- Weighs 8 pounds before adding liquid coolant
Good fit if
- You build a custom liquid cooling loop inside a Phanteks 719LTG case.
- You want an all-in-one reservoir solution with an included DDC pump.
- You run radiators that measure 30mm thick or less.
Skip if
- You use any computer chassis other than the Phanteks 719LTG.
- You plan to install radiators thicker than 30mm.
- You already own a standalone DDC or D5 pump.
Verdict: Bykski Phanteks 719LTG Distro Plate with DDC Pump fits builders assembling a parallel hardline cooling loop directly inside the Phanteks 719LTG case. It gives you a dedicated pump and reservoir layout built strictly around that single chassis.
Bykski O11 Dynamic XL Distro Plate with DDC Pump
Best for: Phanteks 719LTG owners seeking simplicity
- Lighting
- 5v Addressable RGB
- Material
- PMMA
- Pump Compatibility
- DDC
- Dimensions
- 16.7 × 5.67 × 1.32 inches
- Weight
- 10 pounds
View on Amazon: Bykski O11 Dynamic XL Distro Plate with DDC Pump
This Bykski distro plate is engineered specifically for the Phanteks 719LTG case. It features a full PMMA acrylic body with 5V addressable RGB lighting. The unit includes a DDC pump with an armor heatsink, simplifying loop assembly. Measuring 16.7 inches long, it supports radiators up to 30mm thick. You get a pre-assembled plate that reduces tubing runs for a cleaner look.
Pros
- Pre-assembled PMMA acrylic construction
- Includes DDC pump with armor heatsink
- 5V addressable RGB lighting
- Compatible with radiators up to 30mm thick
Cons
- Limited to Phanteks 719LTG case compatibility
- No software or app control listed
- Heavier build at 10 pounds
Good fit if
- You own a Phanteks 719LTG case
- You want a pre-assembled distro plate
- You prefer inline pump integration
Skip if
- You use a different case brand
- You need wireless app control
- You want a lighter unit under 5 pounds
Verdict: Bykski Phanteks 719LTG Distro Plate suits builders who want a specific fit for their 719LTG case with minimal assembly effort. It delivers a clean, integrated look with the included DDC pump and RGB lighting.
Bykski InWin 925 Distro Plate with DDC Pump
Best for: InWin 925 owners wanting an inline pump
- Lighting
- 5v Addressable RGB
- Material
- PMMA
- Pump Compatibility
- DDC
- Dimensions
- 14.9 × 5.24 × 1.32 inches
- Weight
- 10 pounds
This distro plate is built specifically for the InWin 925 case. It includes a DDC pump with an armor heatsink and 5v addressable RGB lighting. The unit measures 14.9 inches long and weighs 10 pounds. It features a full PMMA design for visual appeal. You should use it if you want an inline pump setup in that specific case. It is not recommended for other chassis.
Pros
- Includes DDC pump with armor heatsink
- Features 5v addressable RGB lighting
- Pre-assembled and primed for installation
- Full PMMA acrylic construction
Cons
- Limited to InWin 925 case compatibility
- Heavier at 10 pounds than standard plates
- No app or software control mentioned
Good fit if
- You own an InWin 925 case
- You prefer an inline DDC pump layout
- You want pre-assembled acrylic components
Skip if
- You use a case other than the InWin 925
- You need software-controlled lighting effects
- You prefer a lighter, pump-less plate
Verdict: Bykski InWin 925 DDC Pump Plate suits builders who want a ready-to-install pump plate for that specific chassis. It offers a clean inline pump solution with RGB lighting for InWin 925 owners.
Bykski Phanteks Evolv Shift X Distro Plate
Best for: Phanteks 719LTG owners wanting a DDC pump
- Lighting
- 5v Addressable RGB
- Material
- PMMA
- Pump Compatibility
- DDC
- Dimensions
- 12 × 6.1 × 1.24 inches
- Weight
- 10 pounds
This Bykski distro plate is engineered for the Phanteks 719LTG case. It features a transparent PMMA body with 5v addressable RGB lighting. The unit includes a DDC pump with an armor heatsink. Dimensions are 12 by 6.1 inches. It weighs 10 pounds. This setup simplifies your loop layout. You get organized tubing runs and a clean look. It suits builders who want a pre-assembled center for their cooling system.
Pros
- Includes DDC pump with armor heatsink
- Transparent PMMA construction
- 5v addressable RGB lighting
- Pre-assembled for quick installation
Cons
- Heavy at 10 pounds
- Case-specific fit only
- No software control mentioned
Good fit if
- You use a Phanteks 719LTG case
- You want a pre-assembled DDC pump setup
- You prefer clean parallel tubing lines
Skip if
- You need compatibility with other cases
- You want a pumpless plate
- You require software lighting control
Verdict: Bykski Phanteks 719LTG PMMA Distro fits users who want a heavy, pre-assembled DDC pump setup for their specific Phanteks 719LTG case. It provides a clean look but lacks flexibility for other builds.
Bykski Cougar Blazer Distro Plate with DDC Pump
Best for: Cougar Blazer case owners wanting integrated pump
- Lighting
- 5v Addressable RGB
- Material
- Acrylic (PMMA)
- Pump Compatibility
- DDC
- Dimensions
- 14.2 × 4.13 × 1.32 inches
- Weight
- 10 pounds
View on Amazon: Bykski Cougar Blazer Distro Plate with DDC Pump
This Bykski distro plate is engineered specifically for the Cougar Blazer case. It features a full PMMA acrylic body with 5v addressable RGB lighting. The unit includes a DDC pump with an armor heatsink, simplifying your loop layout. It measures 14.2 inches long and weighs 10 pounds. This pre-assembled plate is ready for installation with minimal tubing runs. It suits users seeking a clean, case-specific aesthetic with integrated pumping.
Pros
- Includes DDC pump with armor heatsink
- Full PMMA acrylic construction
- 5v addressable RGB lighting
- Pre-assembled and primed for quick installation
Cons
- Designed exclusively for Cougar Blazer case
- No software control mentioned for RGB
- Fixed 10-pound weight adds case load
Good fit if
- You own a Cougar Blazer case
- You want a pre-assembled distro plate
- You prefer inline pump integration
Skip if
- You use a different case model
- You need software-controlled RGB
- You prefer a pumpless design
Verdict: Bykski Cougar Blazer Distro Plate w/ DDC Pump is a specialized solution for Cougar Blazer owners who want a clean, pre-assembled loop centerpiece. It fits users prioritizing case-specific fit and integrated pumping over universal compatibility.
Bykski Lian Li O11 Distro Plate with RGB
Best for: Lian Li O11 case owners
- Lighting
- 5v Addressable RGB
- Material
- Acrylic (PMMA)
- Pump Compatibility
- DDC
- Dimensions
- 13.5 × 5.22 × 1.32 inches
- Weight
- 10 pounds
This Bykski distro plate is engineered specifically for the Lian Li O11 case. It features a frosted PMMA body with 5v addressable RGB lighting. The unit comes with a DDC pump and armor heatsink pre-installed. Dimensions are 13.5 inches long, 5.22 inches wide, and 1.32 inches high. It weighs 10 pounds. This setup simplifies loop layout by integrating the pump into the distribution plate for a clean, inline configuration.
Pros
- Includes DDC pump with armor heatsink
- Features 5v addressable RGB lighting
- Frosted PMMA acrylic construction
- Pre-assembled and ready for installation
Cons
- Limited to Lian Li O11 case compatibility
- Heavy 10-pound build
- No software control mentioned
Good fit if
- You own a Lian Li O11 case
- You want an inline pump setup
- You prefer frosted acrylic aesthetics
Skip if
- You use a case other than Lian Li O11
- You need software lighting control
- You prefer a lightweight component
Verdict: Bykski Lian Li O11 DDC Distro Plate suits builders using the Lian Li O11 case who want a pre-assembled inline pump solution with frosted acrylic and RGB lighting.
Bykski TT Level 20 XT Distro Plate with RGB
Best for: Thermaltake Level 20 XT owners
- Lighting
- 5v Addressable RGB
- Material
- Acrylic (PMMA)
- Pump Compatibility
- DDC
- Dimensions
- 13.8 × 7.93 × 1.32 inches
- Weight
- 10 pounds
This Bykski distro plate is built specifically for the Thermaltake Level 20 XT case. It features a transparent PMMA body with 5V addressable RGB lighting. The unit shown includes a DDC pump with an armor heatsink, integrating power directly into the loop. It measures 13.8 inches long and weighs 10 pounds. You should choose this if you want a pre-assembled, case-specific cooling center that simplifies tubing runs and enhances visual appeal.
Pros
- Engineered specifically for the Thermaltake Level 20 XT case
- Includes DDC pump with armor heatsink in this configuration
- Features 5V addressable RGB (RBW) lighting strip
- Fully assembled and ready for quick installation
- Transparent PMMA construction for clean visual appeal
Cons
- Case-specific design limits use to Thermaltake Level 20 XT only
- Heavy build at 10 pounds
- No mention of software control for RGB lighting
Good fit if
- You own a Thermaltake Level 20 XT case
- You want a pre-assembled distro plate with a DDC pump
- You prefer minimal tubing runs and organized loop layouts
Skip if
- You use a case other than the Thermaltake Level 20 XT
- You need software control for the RGB lighting
- You want a lighter distro plate without an integrated pump
Verdict: Bykski TT Level 20 XT Distro Plate is a heavy, case-specific solution for Thermaltake Level 20 XT owners who want a pre-assembled loop center with a DDC pump and RGB lighting.
Specifications side by side
| Spec | Bykski Phanteks 719LTG Distro Plate with DDC Pump | Bykski O11 Dynamic XL Distro Plate with DDC Pump | Bykski InWin 925 Distro Plate with DDC Pump | Bykski Phanteks Evolv Shift X Distro Plate | Bykski Cougar Blazer Distro Plate with DDC Pump | Bykski Lian Li O11 Distro Plate with RGB | Bykski TT Level 20 XT Distro Plate with RGB |
|---|---|---|---|---|---|---|---|
| Lighting | 5v Addressable RGB | 5v Addressable RGB | 5v Addressable RGB | 5v Addressable RGB | 5v Addressable RGB | 5v Addressable RGB | 5v Addressable RGB |
| Material | Acrylic (PMMA) | PMMA | PMMA | PMMA | Acrylic (PMMA) | Acrylic (PMMA) | Acrylic (PMMA) |
| Pump Compatibility | DDC | DDC | DDC | DDC | DDC | DDC | DDC |
| Dimensions | 17.8 × 5.39 × 1.32 inches | 16.7 × 5.67 × 1.32 inches | 14.9 × 5.24 × 1.32 inches | 12 × 6.1 × 1.24 inches | 14.2 × 4.13 × 1.32 inches | 13.5 × 5.22 × 1.32 inches | 13.8 × 7.93 × 1.32 inches |
| Weight | 8 pounds | 10 pounds | 10 pounds | 10 pounds | 10 pounds | 10 pounds | 10 pounds |
| Size | DDC Pump With Armor | DDC Pump With Armor | DDC Pump With Armor | DDC Pump With Armor | DDC Pump With Armor | DDC Pump With Armor | DDC Pump With Armor |
| Color | not specified | not specified | not specified | Transparent | not specified | Frosted | Transparent |
Frequently asked questions
Can I use a Bykski distro plate designed for other cases in my Phanteks 719LTG?
You should use a plate specifically made for your chassis. The Bykski Phanteks 719LTG Distro Plate fits builders assembling a parallel hardline loop directly inside that single chassis. Other plates, like the O11 Dynamic XL version, are designed for different cases and may not align with your mounting points or internal layout.
What pump type do these Bykski distro plates use?
All listed Bykski distro plates are compatible with the DDC pump. Each unit integrates a DDC pump with an armor heatsink. This combination provides a dedicated pump and reservoir layout built strictly around the specific chassis, ensuring a clean and integrated look without requiring separate pump mounting hardware.
Do these distro plates include RGB lighting?
Yes, every plate in this list features RGB lighting. The Bykski Phanteks 719LTG Distro Plate includes 5V addressable RGB lighting. Other models, such as the Lian Li O11 version, also offer RGB options. This lighting is integrated directly into the PMMA unit to enhance the visual appeal of your loop.
How heavy are these pre-assembled distro plates?
These units are quite heavy due to the integrated pump and acrylic construction. The Bykski Phanteks 719LTG plate weighs 8 pounds, while most other models like the InWin 925 and Cougar Blazer versions weigh 10 pounds. You must ensure your case has adequate support to handle this weight safely.
Which Bykski plate is best for a compact build?
The Bykski Phanteks Evolv Shift X Distro Plate is the most compact option. It measures 12 inches in length and 6.1 inches wide. This smaller footprint suits users who want a heavy, pre-assembled DDC pump setup but have limited space. It provides a clean look while minimizing the loop center size.
Are these distro plates universal or case-specific?
These are case-specific solutions. Each plate is designed for a single chassis, such as the Phanteks 719LTG, InWin 925, or Lian Li O11. They offer a ready-to-install pump plate for that specific case. This approach ensures a precise fit but lacks flexibility for use in other chassis types.
What material is used for the reservoir body?
The reservoir bodies are made from PMMA acrylic. The Bykski Phanteks 719LTG Distro Plate uses PMMA for its clear construction. Some variants, like the Lian Li O11 plate, offer a frosted finish. This material allows you to see the coolant level while maintaining a rigid structure for the integrated pump.